Why Shop Sonic Free Shipping Free Tech Support Easy Returns Low Price Guarantee Details
Free Kicker active-style headphones with a purchase of $100+ of Kicker Gear
Print

Polk Audio PA1200.1 (PA 1200.1)

2400W Max, Class D Monoblock Amplifier

4.0

(1 review)

Read 1 review

Write a review

The product on this page is discontinued.

Specials with this product

  • Free Ground Shipping to the 48 statesdetails
  • PA Series Class D Monoblock Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 400 watts x 1 chan.
    • 2 ohms: 800 watts x 1 chan.
    • 1 ohm: 1200 watts x 1 chan.
  • Max power output: 2400 watts x 1 chan.
  • PWM (Pulse Width Modulated) MOSFET power supply
  • Wired remote volume level control included
  • LED power and protection indicators
  • Selectable bass boost (0, +8 dB at 40 Hz)
  • Double-layer fiberglass epoxy printed circuit boards
  • 1 ohm stable
  • Master/Slave switch for easy daisy chaining of other amplifiers
  • Master/Slave switch allows parallel operation- master amp’s gain and crossover settings will be duplicated in "slave" amplifiers for consistent, repeatable settings
  • High-speed MOSFET switching power supply and high current Bipolar Output Transistors pump maximum voltage and high current to your subwoofers
  • Connection for optional LED light bar or optional amplifier cooling
  • Power/ground-reversal, thermal, short, current, overdraw, and low impedance protection circuitry
  • Cast aluminum textured end caps
  • Switchable 180° phase inversion
  • Variable input sensitivity optimizes match with different signal sources
  • Unity gain pass-through RCA jacks
  • Mounting hardware with rubber isolation grommets and extra fuses included.
  • Effective Damping Factor: >150
  • Anodized extruded brushed-aluminum cover for maximum heat dissipation
  • Preamp RCA outputs
  • Chrome-plated RCA level inputs
  • Chrome-plated screw terminals
  • Variable low-pass filter (30-250 Hz, 12 dB/octave)
  • Subsonic Filter (24 dB at variable frequencies)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-250 Hz
  • Dimensions: 15-1/4"L x 10-1/4"W x 2-3/4"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year SonicElectronix.com warranty
Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms400 watts x 1 channel
RMS Power @ 2 ohms800 watts x 1 channel
RMS Power @ 1 ohm1200 watts x 1 channel
Peak Power Output2400 watts x 1 channel
Amplifier Specifications
Amplifier ClassD
Number of Channels1 - Mono
Total Peak Power Output2400 watts
Total RMS Power Output1200 watts
Maximum Input Gauge Size4 AWG
Minimum Impedance Unbridged1 ohms
Minimum Impedance BridgedN/A
THD at Rated RMS Power1%
Speaker Level InputsNo
Preamp Outputs1 pair
Built-in CrossoverLow-pass (LP)
High-Pass Crossover FrequencyN/A
Low-Pass Crossover Frequency30 - 250 Hz
Subsonic FilterVariable
Signal-to-Noise Ratio98 dB
Channel SeparationN/A
Bass Boost0 - 8 dB
Bass/Gain RemoteYes
Fan CooledOptional (Accessory is required)
Fuse Rating40A x 3 
CEA-2006 CompliantYes
Warranty and Return Policy
Return Policy Standard Return Policy
Parts Warranty Duration1 year
Labor Warranty Duration1 year
Warranty ProviderSonic Electronix
Customer Review Summary for Polk Audio PA1200.1 (PA 1200.1)
Average Customer Rating is 4.0 out of 5 stars:
4.0
based on 1 Reviews
Share your thoughts with others:
Write a Review
Rating Distribution:
5 star:
.
0%
4 star:
.
100%
3 star:
.
0%
2 star:
.
0%
1 star:
.
0%
what's this?
Average Attributes Rating:
Durability
5.0
Value
5.0
Features
4.0
Design
4.0
Usability
5.0
what's this?
Most Helpful Customer Reviews:
May 16, 2010 for my W7
Review by
Lewog from Burlington WI
Overall
Durability
Value
Features
Design
Usability
Based on the difference between my Coustic 400SE bridged and the PA1200.1, SPL is nearly the same. BUT the Polk brings an incredible amount of "tightness' to all spectrum of the JL's sound. The draw from my alt is much much less also. my guess at 12 volts is around 600rms to the 3ohm sQ monster (tested is actually 2.6ohm). 2003 Lancer ES.
Help other customers find the most helpful reviews
Was this review helpful to you?
Yes No
 Report Abuse | Write a Review
Share on Facebook Share on Twitter Share on Delicious Share on Buzz
Amplifier Wiring Kits
Get the wires you need to properly install and power your car amp.
 ProductPriceAdd?
The InstallBay AK02 by MetraThe InstallBay AK02 by Metra
Budget Conscious 0 Gauge Amplifier Install Kit w/ RCA Interconnects		$59.99
e2 E3200e2 E3200
Dual Amp ~0+~4 Gauge Amplifier Kit with RCAs, Distribution Blocks		$84.99
Kicker PKD1 (09PKD1) Dual Amplifier Installation KitKicker PKD1 (09PKD1) Dual Amplifier Installation Kit
Top Selling Single or Dual Amp 1/0 Gauge Install Kit with Terminals and Distribution Blocks		$209.99
Monster Cable BAP1500Monster Cable BAP1500
1/0 Gauge Single Amplifier Power Kit for up to 1500W RMS		$165.00
Gauge Adapter
In situations where the input gauges on the amplifier is smaller than the power/ground cable gauge, one of these gauge adapters should be used. They are easy to use and enable your amplifier to to still receive all the power that it requires.
 ProductPriceAdd?
Monster PowerQuip Power Cable Adapter (0/1 AWG to 4 AWG)Monster PowerQuip Power Cable Adapter (0/1 AWG to 4 AWG)
Monster 400 Series PowerQuip gauge reducer allows a 0/1 AWG cable to fit in a 4 AWG input		$15.00
Stinger Gauge Reducer (0/1 AWG to 4 AWG)Stinger Gauge Reducer (0/1 AWG to 4 AWG)
Gold plated gauge reducer allows 0/1 AWG cable to fit in 4 AWG inputs		$9.99
Speaker Wire
Improve the sound quality by delivering more power when replacing your factory wiring. High quality speaker will maximize your amplifier investment and system performance.
 ProductPriceAdd?
Kicker XW1220 Speaker WireKicker XW1220 Speaker Wire
12 Gauge Wire - 20 ft. of Dual Twist Speaker Cable with Sleeves for a Clean Install		$24.49
StreetWires SCP1215BL - 12 AWG Speaker WireStreetWires SCP1215BL - 12 AWG Speaker Wire
12 Gauge Wire - 15 ft. of Speaker Cable with Twisted Construction		$19.99
RCA Interconnects
You will need a good set of RCA interconnect cables to connect your amplifier to your head unit. Using high quality cables ensure the best sound possible by reducing unwanted noise interference, providing tight contacts, and utilizing the latest in cable technology.
 ProductPriceAdd?
Kicker X-Series RCA Interconnect CableKicker X-Series RCA Interconnect Cable
16.5 ft. of 2-Channel Interconnects with twisted pair conductors, K-cut gold plated contacts, and hyper-flex technology for easy installation!		$26.99
Monster Cable 400 Series XTREME RCA Interconnect CablesMonster Cable 400 Series XTREME RCA Interconnect Cables
16.4 ft. of 2-Channel Monster Cable with XLN (Xtra Low Noise) construction, 8-cut turbine MirrorChrome connectors, and 3-way time correct windings for the ultimate RCA cable!		$69.00
StreetWires ZN9 Series Interconnect CableStreetWires ZN9 Series Interconnect Cable
16.4 ft. of 2-Channel ZN9 Cable with Rhodium-plated connectors, twisted-pair construction, and the the highest quality of signal transfer.		$54.99
Installation, Tools & Accessories
With our professional install card, you can have your amp installed by a pro near you, or you can purchase tools and do the install yourself.
 ProductPriceAdd?
StreetWires FB4StreetWires FB4
4 AWG / 4 Gauge Firewall Bushing		$7.99
StreetWires FB0StreetWires FB0
1/0 Gauge Firewall Bushing		$4.99
Kicker DB1448 (09DB1448) - Top of the Line!Kicker DB1448 (09DB1448) - Top of the Line!
Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs		$18.99
Professional Installation for your Car Power AmplifierProfessional Installation for your Car Power Amplifier
Covers labor charges through our professional installer network.		$89.99
Testing and Performance
Optimize your system's performance with testing tools such as SPL meters, bass test discs and more!
 ProductPriceAdd?
AutoSound 2000 CD-104AutoSound 2000 CD-104
The ultimate amplifier level setting disc used for evaluation of audio components		$12.99
AutoSound 2000 CD-102AutoSound 2000 CD-102
High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.		$12.99
AutoSound 2000 CD-103AutoSound 2000 CD-103
Audiophile reference series test disc for evaluation of all audio components.		$12.99
Related products
e2 E1000 by Scosche
e2 1000W Single Amplifier Wiring Kit • 9.5mm Power/Ground (Equivalent in Strands to Most Other "4 Gauge" kits) • 17' Twisted Hex RCA Interconnect Cables • 17' Power and Ground
$34.99
in stock
More info

Product Summary

Manufacturer: Polk Audio
Model number: PA1200.1
UPC: 747192113650
Weight: 17.00 lbs
Internal SKU: pa12001
Internal product ID: 13580

Why Sonic Electronix?

Musical Mayhem Sweepstakes sponsored by MTX Audio. 3 winners, $2,300 in prizes!

Customer Testimonial

Radio is installed with supplied kit and works great. The price with free shipping and the extras makes this purchase almost a steal!
I can gurantee I'll be a repeat customer. THE DEALS SPEAK FOR THEMSELVES!

- Brandon from Arkansas

See more…

Recently Viewed Items

pa12001 thumbnail

800W Max, Class D Monoblock Amplifier

pa12001 thumbnail

320W Max, PA Series 4-Channel Amplifier

pa12001 thumbnail

7.7" 2-way Marine Component Speaker System with White "Classic Grilles"