Expert Service 1-661-257-9993 [Hours]

MTX Audio JackHammer JH4510-04

400W Max, 10" Single 4 ohm Jack Hammer JH45 Series Subwoofer

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

MTX Audio JackHammer JH4510-04

400W Max, 10" Single 4 ohm Jack Hammer JH45 Series Subwoofer

$54.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$7.99
Add Warranty
3 years of protection

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the MTX Audio JackHammer JH4510-04.

Get FAST answers from customers ASK a Question See questions answers

Authorized MTX Dealer
When you put the name JackHammer on any subwoofer, you've got a reputation to protect. Designed and engineered in the U.S.A., JackHammer subwoofers are made of high quality materials and are packed with features that put other subwoofers to shame.

The JackHammer series are loaded with features that make them rock. Both models feature rubber surrounds that are stitched directly to the cone for durability and have voice coils that are wound with 428° High Temperature wire to ensure that your JackHammer subs will keep pounding the streets as long as you want them to. Both levels also feature MTX's proprietary Spider Plateau Venting technology which helps push hot air out of the voice coil and bring cool air in, adding to the reliability of the subwoofer and keeping it cool even in the hottest cars. JackHammer series subwoofers also feature the Asymmetrical Linear Drive System that is featured on other MTX subwoofers which combines a flat progressive spider with an extended pole piece to reproduce smooth, linear motion for incredibly crisp, clean sound.

The JH45 subwoofers have a silver stamped basked, rubber magnet cover and a industrial-looking "riveted" dust cap design.

  • 10" JackHammer 45 Round Series Subwoofer
  • Power Handling:
    • Peak: 400 watts
    • RMS: 200 watts
  • Impedance: Single 4 Ohm
  • Polypropylene woofer cone
  • Rubber surround
  • Stitched Cone for added durability and style
  • Precision Stamped Basket for greater structural integrity
  • FEA optimized roll geometry to maximize excursion without sacrificing cone surface area
  • ALDS Asymmetrical Linear Drive System with a flat progressive spider and extended pole piece for smooth, linear, piston like drive
  • Industry leading thermal power handling using 428° F High Temperature Voice Coil Wire
  • Industry leading Spider Plateau Venting cooling system cools at the voice coil
  • 1-3/4" Single voice coil
  • 70oz. Magnet structure
  • Frequency response: 31-150 Hz
  • Sensitivity: 86.4 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
400 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
200 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
31 - 150 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
86.4 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
9.4 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Silver
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.75 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.75 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.45 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.45 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
4-7/8"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-1/8"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
54%
4 Star
31%
3 Star
15%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.5
Value
4.7
Features
4.5
Design
4.6
Usability
4.8
Brandon

Sanford, NC

Overall
Durability
Value
Features
Design
Usability
Awsome Product

January 23, 2010

Hits Hard and is one of the most durable subs I have ever seen I would definitly recommend this if you want a great price and high quality sub. I currently have two of them in my 2008 mustang gt and they do what is needed in every way, clear strong bass.

4 of 5 found this helpful

Was this review helpful to you?

NRA4ever

North La

Overall
Durability
Value
Features
Design
Usability
Decent sub

October 13, 2010

I tried this sub in a sealed box. It does well with the rated power. It doesn't like 500 watts RMS. For a cheap sub it sounds good & gets fairly loud. Its a good value for the price

3 of 4 found this helpful

Was this review helpful to you?

Jeffery

Muskegon, MI

Overall
Durability
Value
Features
Design
Usability
Decent bass

September 9, 2010

I've got one of these in a small sealed box in the trunk of a civic. It's running on about 130 watts rms. Sounds good for just having one 10" and not giving it all the power it can handle. It doesn't pound with my setup, but it does give my music the bottom end I love!

3 of 4 found this helpful

Was this review helpful to you?

the JH

sallisaw ok

Overall
Durability
Value
Features
Design
Usability
great subs

June 13, 2010

if your looking for a good ten buy a great one right here. i have 2 of these in a ported box with a 760 watt pioneer amp and they freaking rock. they don't hit real low but they hit great on stuff like lamb of god. if you going to get this sub i would say get 2, the more the better on these

3 of 4 found this helpful

Was this review helpful to you?

Dan

Mound, MN

Overall
Durability
Value
Features
Design
Usability
Pimp My Ride

October 16, 2008

If you've ever seen the show Pimp My Ride these are what they use. Usually they use the bigger sizes but this is a Jack Hammer alright.

These are especially known for good deep bass and hard hits, careful when listening because these can easily break the barrier of bloody ears.

3 of 4 found this helpful

Was this review helpful to you?

Farrukh

Golden Valley, MN

Overall
Durability
Value
Features
Design
Usability
Better then kicker 06Comp

February 13, 2011

I ran these with a 06ZX400.1 Kicker amp and they sounded great in a slot ported box! It was a win by a nose but they beat the Kicker Comp 12" subs which I had in the same exact setup, I just swapped those subs for these for a while and these performed better. Good product for the average joe, but if ur competing in competitions then u might wanna step up your game to higher end MTX or a Kicker Solo Baric. terminals on the back are easy to connect to, too.

2 of 3 found this helpful

Was this review helpful to you?

Matthew

Canada

Overall
Durability
Value
Features
Design
Usability
Best Price Point

January 25, 2011

Bought these not expecting anything amazing because of the price, but I was very surprised when I got them installed and was 'blown away' by the bass.

2 of 3 found this helpful

Was this review helpful to you?

Jeff

Muskegon, MI

Overall
Durability
Value
Features
Design
Usability
Good, cheap name brand bass!

November 3, 2010

Tight clean bass. It could be a bit more musical though, it does show it's spl side.

2 of 3 found this helpful

Was this review helpful to you?

Dylan

Portland,ME

Overall
Durability
Value
Features
Design
Usability
Nice Sub

March 27, 2010

This Particular sub woofer I bought was, well worth it, at the time they even had a deal on it which in terms means I got it for cheap, but either way this product is well worth the money.

2 of 3 found this helpful

Was this review helpful to you?

chevyZ71

Lewisville, AR

Overall
Durability
Value
Features
Design
Usability
jackhammer says it all

February 22, 2010

i would definintely suggest these subs to anyone who is looking for a good set on tens. i got 2 of them off of my friend and they by far are the best subs i have had so far (previously owning a 10" memphis PR and a RF he2 12"). i have them hooked to a RF 501S 1500 watt amp and they hit like no other. sum of my friends say it sounds like a have a couple of 12's in my truck. im looking at getting a probox for my truck to put them in.

2 of 3 found this helpful

Was this review helpful to you?

Brett

Independence, MO

Overall
Durability
Value
Features
Design
Usability
GREAT SUBS!

February 22, 2009

I got 2 mtx jackhammer 12\" in a bandpass box (downfiring) and 2 10\" jackhammers in a custom made 1.43cu ft ported box, they\'re awesome with just the 2 tens, and on certain songs I\'ll adjust my bass and make your eyes blink every hit. the 12\'s just primarily shake, because they\'re downfiring.

2 of 3 found this helpful

Was this review helpful to you?

Brent

PA

Overall
Durability
Value
Features
Design
Usability
GREAT SUBS!

February 19, 2009

Just bought two 10inch's. These subs kick hard and are awesome. They blow my old ones away. They look incredible in the box and sound great. Overall a great purchase!

1 of 2 found this helpful

Was this review helpful to you?

asdfgh

Roanoke Alabama

Overall
Durability
Value
Features
Design
Usability
Great subs!

December 23, 2008

I just bought 2 of these subs on an x-mas sale at my local auido shop put them in a sealed box and hooked them up to a kicker 200.2 amp and boy they hit hard in my honda accord they BLOW MY OLD KICKER COMP 10's AWAY if your on a budget and want some good bass that will give you headaches when your riding around these are for you!

1 of 2 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $37.85

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $53.99

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $64.87

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $87.63

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.97

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $16.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $3.44

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 MTX Audio JackHammer JH4510-04 Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 MTX Audio JackHammer JH4510-04 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 MTX Audio JackHammer JH4510-04 Subwoofers

4 Channel Amp

4 MTX Audio JackHammer JH4510-04 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

JH4510-04

UPC

715442351619

Weight

10.75lbs

Internal SKU

jh451004

Internal Product ID

14788

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: MTX Audio JackHammer JH4510-04