Expert Service 1-661-257-9993 [Hours]

Hitron HA-1000.1 (Black)

(BLACK) 1000W Max, Monoblock Amplifier with Bass Remote (HA1000.1, HA10001, HA-10001)

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

Hitron HA-1000.1 (Black)

(BLACK) 1000W Max, Monoblock Amplifier with Bass Remote (HA1000.1, HA10001, HA-10001)

$79.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$10.99
Add Warranty
3 years of protection

Belva 1.0 Farad Capacitor + Amp Kit

BB1D 1.0 Farad Capacitor + BAK42 Complete 4 Gauge Amplifier Wiring Kit

$39.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$199.99

Add
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$11.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Hitron HA-1000.1 (Black).

Get FAST answers from customers ASK a Question See questions answers

  • Single-Channel Mono Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 400 watts x 1 chan.
    • 2 ohms: 600 watts x 1 chan.
  • Max power output: 1000 watts x 1 chan.
  • MOSFET power supply
  • Wired remote bass level control included
  • LED power indicator
  • Selectable bass boost (On or Off)
  • Variable low level control with0 RCA input
  • High-level input
  • RCA output
  • Protection against over current, thermal, and DC offset
  • Heavy duty aluminum alloy heatsink
  • RCA level inputs
  • Screw terminals
  • Variable low-pass filter (30-250 Hz)
  • Subsonic Filter (20 Hz to 50 Hz)
  • Frequency response: 15-30 Hz
  • Dimensions: 9"L x 11-1/2"W x 2-1/2"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Color is Black
  • Also available in: Gray
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

400 watts x 1 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

600 watts x 1 channels

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.

Power Specifications - Full Range Channels

Peak Power @ 4 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Bridged Peak/Max Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the Peak/Max power created once an amplifier is bridged.

Power Specifications - Subwoofer Channel

Peak Power @ 4 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

1000 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

600 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.3%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Full (AP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

30 - 250 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
20 - 50 Hz
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
20A x 2 
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
46%
4 Star
31%
3 Star
23%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.2
Value
4.5
Features
4.0
Design
4.5
Usability
4.7
Johnny Hemp

Mary Jane, FL

Overall
Durability
Value
Features
Design
Usability
Great Amp - Great Price

October 14, 2010

I have had this amp installed in my car, pushing 2 JL Audio 12w0's for the past 6 months, and have not had any problems. This amp has been great for my system and I would recommend this Amp to anyone looking to power Subwoofers in the 500-600w RMS range. I'm no expert, but I did a lot of research looking for the best amp for my money and this was perfect. It may not be a known brand, but it delivers power.

*Pros*
- Price
- Sleek Look - Cool blue LED lights
- 600w RMS Power
- Easy to install
- Comes with Bass Control switch

*Cons*
- Not a known brand
- Gets pretty hot (but what amp doesn't?)

Overall, Great Amp, Great Price, Great Quality, Perfect for what I needed, and have not had any problems with it over the past 6 months. Hope this helps anyone thinking about purchasing this amplifier.

8 of 9 found this helpful

Was this review helpful to you?

Choo Choo

NC

Overall
Durability
Value
Features
Design
Usability
Good Amp!!

October 11, 2009

I love this amp, It has great power at low cost. I have two sony 15's and they hit hard!!....I have this amp with a 2 farad capacitor and it hurts my ears when i turn it all the way up. This Amp has a lot of power when hooked up right and for a good price. I would recommend this amp to anyone.....

7 of 8 found this helpful

Was this review helpful to you?

Priest

Atlanta, GA

Overall
Durability
Value
Features
Design
Usability
Not Recommended!!

December 1, 2010

This amp has power when it is on. Mine goes into protect mode everytime I play it, only playing for about 5 minutes. I only have 1 dual 4 ohm 12 inch sub wired down to 2 ohms rated at 500w RMS.
It heats up too fast and goes into protect mode way too much. I would not recommend this amp. I am going to upgrade to class D.

6 of 7 found this helpful

Was this review helpful to you?

Christian

Kingsburg, CA

Overall
Durability
Value
Features
Design
Usability
Great for the price

August 20, 2010

this amp is much better than i antisipated its pushing a RE SEX 12" and it sounds great but im gunna upgrade to a bigger amp good amp for the price

7 of 9 found this helpful

Was this review helpful to you?

Daniel

Newark, OH

Overall
Durability
Value
Features
Design
Usability
decent amp for price

June 3, 2010

i have this hooked up to one kenwood kfc 3012. it drives it nicely, but i would hesitate to add another sub too it. after long use the amp can get warm and I've only had it shut off on me once. the bass remote is nice, and it is easy to operate and install. nice blue LED lines the amp edges. looks cool if you care for that sort of thing. great price @ sonic electronics!

6 of 7 found this helpful

Was this review helpful to you?

Brandon

Kouts, IN

Overall
Durability
Value
Features
Design
Usability
Decent little amp

December 28, 2009

Ive had this amp for a little over 6 months now and haven't really had any problems so far. Does get a little bit warm after being pushed hard after 15-20 min on 3/4 gain, but its not too bad. I have ran a cheap set of components off it and it produced some pretty impressive sound quality out of them and they got loud. I'd say if you're gonna run lower power subs or some components this would be an ok amp to suit you're needs. For the price, its a nice little amp, but if you really want allot of clean power, look further.

6 of 7 found this helpful

Was this review helpful to you?

james

ocean city maryland

Overall
Durability
Value
Features
Design
Usability
hitron amp

November 3, 2009

i bought this amp to power one of my kicker subs it has worked relatively well but the led lights have been really quirky they are either working or not working the amp works great but the l.e.d's are very upsetting guess u get what u pay for

6 of 7 found this helpful

Was this review helpful to you?

moises

anna, TX

Overall
Durability
Value
Features
Design
Usability
power

November 2, 2010

This is possibly one of the best amps in its class. I have it hooked to 2 kicker comp 15s and I slam it all day every day and it doesn't heat up or anything. I also abused it a lot when I was tuning it and it lasted. I highly recommend this amp the pice is cheap and the sq and power is amazing

5 of 6 found this helpful

Was this review helpful to you?

joey

mill valley, CA

Overall
Durability
Value
Features
Design
Usability
hitron amp 1000w

September 6, 2010

great amp. didn't think it would have as much power as it did. i have it set up to a 12" type R. knocks in my Toyota Celica

5 of 6 found this helpful

Was this review helpful to you?

brent

Englewood, FL

Overall
Durability
Value
Features
Design
Usability
Surprised me!

July 12, 2010

I bought this amp around December 09 to run on an old JL w3 for a while till i got my 15 inch Type-R, then i was planning on runnin it on that till that sub killed it....wow was wrong! This little cheapo amp pounds my 15 all day and gets pretty hot but not close enough to kick it into protection mode.For kicking a 15 inch type-r the way it does, id say its doing close to the power it rates at.I thought the blue lights were gonna be kinda cheesy and half work but i have to say they are sweet at night and everything on this amp is holding up perfect as its going on its 7th month.

5 of 6 found this helpful

Was this review helpful to you?

Dustin

Spokane, WA

Overall
Durability
Value
Features
Design
Usability
Great cheap amplifier

March 5, 2010

For the price, this sub cant be beat. Been using it for about 6 months now and haven't had any issues with it. Build quality isn't the greatest and there is no way its putting out the power it say it does, but the price is right!

5 of 6 found this helpful

Was this review helpful to you?

Gary

Garden Grove, CA

Overall
Durability
Value
Features
Design
Usability
Problem Solved! (And Then Some!!!)

November 5, 2009

Car is a 2002 Ford Explorer Sport Trac, with the "AudioPhile" Pioneer CD-6 six-disc CD head-unit. I had a Blaupunkt THA1250 and a .5 Farad Capacitor powering my Pioneer Premier 10" Shallow Mount 2 Ohm SVC sub in custom box built to recommended volume. That amp stated 300W RMS @ 2 Ohm and thats the rating of that shallow mount.

Problem I had was that the stock headunit seems to be programmed to attenuate (retard/lessen the volume of) the bass frequencies when it was in the last like 3 bars of the volume graph.

Even after tons of fiddling, though it was better it wasn't "right"... so I decided to get this cheaper amp that pumps out twice as much RMS power at the same Ohm load.

Total BONUS is that this amp has a Sub-Sonic Filter dial you can set from 20Hz-to-50Hz, this seemed to help the real low tones get clearer sounding too.

Anyhoo... with this HITRON amp installed, I was able to FADE the headunit a lil more towards the front channels to increase the highs and the lows are just as strong even with technically less signal going to them just because this amp has more power (headroom) overall then the Blaupunkt.

I originally chose the Blaupunkt because of it's slim design that fit under my rear seats.. even with them folded down. The Blaupunkt is a great amp, don't get me wrong, it's just that the issue with my headunit made an amp with more power like this HITRON a better solution. And it didn't hurt that it was HALF the price!~! This HITRON amp is not installed under the seat though... but thats OK because I eventually ended-up taking out all the plastics behind the rear seat to squeeze out us much space to work with for the subwoofer enclosure... so now I just fab'd a couple of wood pieces to mount he amp and capacitor vertically to the side of the sub.

Oh yeah... and this amp looks awesome at night with the blue LED illumination edging it has.

The thing flat out sounds great... and at half the cost of that other one... and I even think it sounds better.. at least for the lowest of lows I think it does... and it's probably because of the Sub-Sonic-Filter feature that it has.

NOTE: It didn't seem like the Remote Bass Controller made a difference in the sound. Maybe it does... but hard to tell as loud and strong as I have it bumping now!

Umm... I'm only feeding it with.. I think.. a 6 Gauge power wire... and it's fine!

And as always... the shipping is incredibly fast! Although I am in Cali also so your mileage may vary on shipping times.

6 of 8 found this helpful

Was this review helpful to you?

Dustin

Issaquah, WA

Overall
Durability
Value
Features
Design
Usability
Hitron HA-1000.1 (Black)

October 7, 2009

I have this amp hooked up to one 12" kicker cvr and the sub is not getting the power it needs. I wish I had spent more on a different amp..

5 of 6 found this helpful

Was this review helpful to you?

Smitty

FPO, AP

Overall
Durability
Value
Features
Design
Usability
Cheap Cheap Cheap !!!

November 11, 2010

69.99 for this amp 69.99 for the Custom Enclosures 12" Round Hole, Long Rear Slot Ported Enclosure and 1 Hifonics HFi12D4 (HFi 12D4) for 39.99 = $179.97 of goodness. doesn't get any cheaper the amp doesn't get hot, my trunk it lit up wit blue and it makes my one 300 watt (rms) Hifonics 12" sound like 2 12's / can't go wrong with this set up

BUY THE AMP !!!!

4 of 5 found this helpful

Was this review helpful to you?

glenh2nd

San Jose, CA.

Overall
Durability
Value
Features
Design
Usability
Brand New

October 13, 2010

I wasn’t expecting much because of the price but I have to say I’m happily surprised. I bought this amp for my son’s truck which is a Nissan Frontier king cab and limited on space. We’re using an older head unit, a Pioneer DEH-P2900MP and a single Polk Audio DB1040 10” subwoofer. The added remote is a must since the bass easily overpowers the stock speakers. Since the amp is exposed in the back the blue lights are a little annoying but my son likes it. I've yet to get the amp very hot but I'm sure my son will put it through its paces. It's still too new to tell you its durability but so far I'm very happy.

4 of 5 found this helpful

Was this review helpful to you?

Gary

Garden Grove

Overall
Durability
Value
Features
Design
Usability
Follow-up Review

April 21, 2010

Changed my setup. I now have the Hitron HA-1000.1 powering 1 (Round) 12" Hifonics Brutus B12D4. They're rated as 600 W RMS and I have it wired to present a 2 Ohm load to the Hitron. And Wooo! it's turning heads! =}

To have the Bass Remote Control work.... you have to have the "Bass Boost" switch turned on. (Doh! Ding!-Ding!-Ding!)

Just today I was bumpin' the ever-lovin snot outta my system for a 75 mile round-trip and the Hitron did just fine.

P.S. - Do yourself a favor and don't mess with those Hi-to-Low RCA converters. If you don't have low-level outputs.. bite-the-bullet and get a new headunit that does. You'll be soo much happier.

4 of 5 found this helpful

Was this review helpful to you?

James

Altha, Florida

Overall
Durability
Value
Features
Design
Usability
Ehh... Its ok

November 30, 2009

I guess for the price its a decent amp... but it doesnt produce 1000 watts peak... mabey 600 peak...

5 of 7 found this helpful

Was this review helpful to you?

Jay

Dallas,Tx

Overall
Durability
Value
Features
Design
Usability
Awesome Value

November 8, 2009

Great amp. im running 300wats rms and it makes the car shake!. nothing fancy but for the price.. its def a deal. ive had it for a good bit now.. and have never had any problems with it.

4 of 5 found this helpful

Was this review helpful to you?

dan

jackson, mo

Overall
Durability
Value
Features
Design
Usability
Hitron HA-1000.1

October 11, 2009

this is a great amp! powering a mb quart shallow mount and it hits hard. doesn't get too hot and overall has great quality. look at the specs before you buy! not just the max rating look at RMS

4 of 5 found this helpful

Was this review helpful to you?

Josh

Norwich, NY

Overall
Durability
Value
Features
Design
Usability
Hitron HA-1000.1 (Black)

August 17, 2009

this amp does not put out the power it should. i have a kicker hooked up to it and u can barley hear the bass. i would not recommend this amp

4 of 5 found this helpful

Was this review helpful to you?

big D

tucson, az

Overall
Durability
Value
Features
Design
Usability
hitron mono amp

March 3, 2009

this mono amp is very good for the price. i hate when people complain about the max power read the specs and look for the RMS then you wont have any complaints. the power is good for the price and not bad looking either.

4 of 5 found this helpful

Was this review helpful to you?

Greyson

Phoenix, AZ

Overall
Durability
Value
Features
Design
Usability
Nice amp

March 2, 2009

This is truly a very nice amp. READ THE SPECS!! This amp is not going to hit at 1000 watts. It's 1000 max power. It powers my 05 kicker cvr 12" very well at 4 ohms. I would recommend this amp to anyone that is looking for great bass at a very cheap price. You get more than what you pay for!!!

4 of 5 found this helpful

Was this review helpful to you?

razr

Forestville, WI

Overall
Durability
Value
Features
Design
Usability
Great amp especially for the money!

January 26, 2010

I am amazed that such a cool amp was so inexpensive. It has blue LEDs mounted all over and it just looks tight. Mine is currently pounding on a Power Acoustik P2-10W.... this sub is nearly the perfect match for the amp. The RMS value for the amp is 600watts and the sub is 500 RMS even though they listed it as 600 RMS on this website... If i had to do it again the hitron would be the one i'd buy and i'd pair it with the Power Acoustik FUBAR-10W instead of the P2-10W

3 of 4 found this helpful

Was this review helpful to you?

Connor

Richmond, VA

Overall
Durability
Value
Features
Design
Usability
hitron

November 29, 2009

I bought this amp(bout 6 months ago) with two 4ohm single voice coil 250w rms subs in very small 0.75cu airspace wedges to go behind the seat on my 93 dodge ram reg cab. they hit very nice, they were 20$ JVC strobo woofers. wrecked that truck and bought a 97 ford f150 ext. cab. had a small back seat, so i've upgraded to dual voice coil audiobahns in much larger boxes. One 500w rms audiobahn 4ohm per coil. One 700w rms audiobahn high excursion 4ohm per coil. I WAS powering these too with a sony xplod 1000.2 (200w rms X 2 @ 2ohm) i had the gain cranked to max and had added a fan onto it to keep it from overheating, at the same time i still had the hitron running the 2 JVC subs @ 2ohms. i THOUGHT the hitron was 2ohm stable at lowest, but i got curious one day and hooked the two audiobahns in parallel for a 1ohm load. but i was sure the amp wouldnt take it, the site states 2ohm. hooked it up, turned the gain 1/4th of the way up and fired it up and it sounded GOOOOD.. amp didnt get too hot so i cranked the gain eventually to a lil over 3/4ths. jesus is this lil amp pumpin out sum power! you could put a full can of beer in my cupholder and it would dance like crazy. perfectly stable at 1ohm. i would suspect with the gain around 3/4ths im getting between 700-850w RMS out of this little sucker at 1ohm. it gets hot, very hot, but wont go into thermal protect if you stay around 3/4ths gain and its in an OPEN area. but hell the thing gets hot at 2ohms... Im going to add four 40mm fans on the air breather areas in the corners. all in all for 80$ you WILL NOT find an amp putting out more power unless its used. not distorted at 1ohm, but not 100% clean either. A+ to whoever hitron is.

3 of 4 found this helpful

Was this review helpful to you?

zachary

Miamisburg, OH

Overall
Durability
Value
Features
Design
Usability
Its ok

November 13, 2008

Over all I think that this amp could be a whole lot more. Don't let the 1000W full you it dose not hit like it should i wish i would of saved my money to get a different amp one that will put out more and make my sub hit hard..

3 of 4 found this helpful

Was this review helpful to you?

stayhigh

rlkk, IL

Overall
Durability
Value
Features
Design
Usability
good

February 2, 2010

good amp for the price i got it on my aurora with a cheap sub and it makes it hit hard but it probably needs a better sub so i can really push it

2 of 3 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Belva 1.0 Farad Capacitor + Amp Kit

BB1D 1.0 Farad Capacitor + BAK42 Complete 4 Gauge Amplifier Wiring Kit

Your Price $39.99

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $89.99

Stinger SK4641 4 Gauge Wiring Kit

Get a high quality amp kit from Stinger to get the most from your new amp!

Your Price $62.95

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

Your Price $29.99

AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

Your Price $199.99

The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $129.99

AudioControl THE-EPICENTER-WHITE

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $139.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

NVX XIX25 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $14.99

4000 Series 2-Channel RCA Cable

17 ft. of 2-Channel 4000 Series RCA Interconnect Cable designed for the Audiophile

Your Price $16.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $92.52

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $448.89

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

320 Amp S Series Alternator for Custom and Racing Applications

Great for a Custom Project

Your Price $499.00

XS Power XP750 Special Edition

12-Volt Deep Cycle AGM Power Cell with 750 Max Amps

Your Price $72.99

Kinetik HC600-BLU

BLU Series 600 Watt 12V High Current AGM Car Audio Power Cell

Your Price $49.99

XS Power D545

12-Volt Deep Cycle AGM Power Cell with 800 Max Amps

Your Price $109.99

NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

Your Price $59.99

Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

Your Price $21.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $18.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $124.60

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $5.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.95

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

HA-1000.1-Black

Weight

9.00lbs

Internal SKU

ha10001-black

Internal Product ID

14961

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Hitron HA-1000.1 (Black)