See all parts that fit your 2025 G70
Fused Distribution Block: 1 0 Gauge Input, 2 4 Gauge Outputs
Product highlights
• Fuse Distribution Block
• 0 Gauge Input
• Two 4 Gauge Outputs
• Platinum plated wiring terminals and accessories
• Durable finish
• Easy installation of multiple amplifier combinations
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
600W Peak (300W RMS) 6.5" Mille PRO Series 3-way 4-ohm Component Speaker System
$999.99
List price $1175.00
250W Peak (200W RMS) 6.5″ PNW Series 2 Way Component 3-ohm Speakers
$319.00
List price $339.00
600W Peak (70W RMS) 6.5" XED Series 2-Way Coaxial 4-ohm Speakers
$49.99
List price $59.99
600W Peak (300W RMS) 6.5" PRO Series Full Range Coaxial 4-ohm Speakers
$189.99
List price $227.99
440W Peak (80W RMS) 6.5" SXE Series 2-way 4-ohm Coaxial Car Speakers
$42.99
List price $54.99
Best selling similar products
HPM Series Power or Ground Distribution Block • One 1/0 Gauge or 4 Gauge Input • Two 4/8 Gauge Outputs • Protective Cover Included • Corrosion Resistant Satin Chrome Finish
(31)
$16.99
List price $39.00
• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(40)
$23.99
List price $49.00
• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$33.99
List price $69.00
• (2) 1/0 ga inputs for power
• (4) 4/8 ga MANL fused power outputs
• >Small Footprint with compact brass design
• All in one compact block
(1)
$45.00
List price $45.00
• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included
(21)
$14.99
List price $29.00
• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$28.99
List price $49.00
• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations
$49.00
List price $69.00
• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base
$69.99
List price $69.99
• Independently MANL fused outputs
• (1) 1/0 AWG - 8 AWG In
• (3) 4 AWG - 10 AWG Out
• Nickel finish for durability
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
(3)
$56.99
List price $63.99
• MANL 4 Position Distribution Block
• Small Footprint
• 1) 1/0 AWG Input
• (4) 4/8 AWG outputs
(3)
$36.00
List price $36.00
| 5 star |
|
88% |
| 4 star |
|
13% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Does its 'job
great distributor, does its job. What else can i say. I had it for six months already with no problems.
30 found this helpful
Excellent block!
This is a great block! very easy and durable to install .
31 found this helpful
Impressive!
JUST received it 10 minutes ago.
Sturdy unit! Fairly thick acrylic cover. almost .25" thick.
Good looking nickle terminals. Not sure of the center led's yet but will find out soon enough. I am assuming they have to do with conductivity of the input. Not sure. AND price is great. Unfortunately I made the mistake of buying MANL fuses which is my fault but would have been WAY impressive if Sonic wrote to me asking if those were the fuses I really wanted, shipped with a NON MANL unit. No biggie. My fault.
30 found this helpful
Great Buy
Needed a solid built distribution block because all the amp kits have weak fuse holders and since I plan to add more amps this was perfect.
Well built with solid construction.(accidentally caught under the hood metal hinge CLOSED 77 caprice with barley a scratch).
Hold fuses tightly and being light is convenient.
Recommended to all!! Great Value.
28 found this helpful
maxximus
great product very basic to use good for high powered systems and you can get around 600 amps from it you cant go wrong with that!!!
28 found this helpful
Distribution Block
Great product. Easy to use, will be purchasing another one soon.
26 found this helpful
Good product at a great price
Have used this for about a month now and no complaints. Used in conjunction with 2 Xscorpion ANL150PL fuses to push mu Autoteck AX950.4 and Kicker ZX750.1 flawlessly.
Pros:
Terminals, screws, and fuse mountings are built like a tank.
Cons:
Fuses are not included. Housing uses 2 tiny screws to mount to vehicle.
Overall a good product with the execution of the mounting screws... you'll have giant gauge wires coming into this tank-like block mounted with iddy-bitty screws...
26 found this helpful
does its job with great looks!
The place I went to installed this in my engine bay. its got 0 gauge Orion wire to 2 4 gauge Kicker wires for my 2 amps. I though there were leds on this..but maybe its just mine that dont work or maybe i haave to do something. I had it and my speakers and amps installed professionally so i havnt even touched it haha. it gets the power to my wires just fine. really like it. very sturdy and good price too! =D
26 found this helpful
Good block, but pretty big
Good upgrade for my main fuse, but it's actually pretty big. Although it's for 1/0 cables, so i think that's why it's so big. good quality and easy mounting fuse and adding wire in terminals.
27 found this helpful
Really cool block
This block was extremely easy to use and hook up my wiring to. The slots for the fuses also come in handy and are really cool. Really enhances the looks of my system and for not a bad price too. Definitely recommend this block.
26 found this helpful
Rockford Fosgate Punch P300X2 OPEN BOX INCOMPLETE
300W RMS Punch Series 2-Channel Stereo Class AB Car Power Amplifier (P300X.2)
$111.99
List price $299.99
300W Rockford Fosgate + Kenwood Bass Bundle
Rockford Fosgate R1L-1X12 12" Loaded Enclosure + Kenwood KAC-1502S 2-Channel Amp + Amp Kit
(1)
$185.77
List price $349.98
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
