When replacing your factory radio with an after-market car stereo, the Scosche HA08B wire harness is a must for a quick and clean installation. It eliminates cutting your OE radio plug. After connecting it, your install is simple as the wires will color-match and easily connect to the after-market stereo. Without the Scosche HA08B, you would have to cut the OE radio plug and manually test each wire to connect to your after-market receiver.
In addition, because you do not have to cut your OE radio plug off, the HA08B allows you to reinstall your factory receiver if necessary. A great example is if you sold your car, but wanted to keep your after-market radio and re-install your factory stereo receiver. We also recommend the Scosche BOBAZT for a quick connection that is sure to last.
Product Features:
- Harness is used when installing an aftermarket stereo
- Connects the aftermarket stereo harness to the vehicles factory harness
- Designed specifically to fit the compatible vehicles
- Plugs into the factory harness without cutting any wires
- Standard color coded wires provide a consistent and simplified installation
- Made from OEM quality materials
Compatible with the following vehicles:
- Acura:
- 1999-2003 CL
- 1999-2001 Integra
- 2001-2006 MDX
- 2001-2005 NSX
- 1999-2004 RL
- 2002-2006 RSX
- 1999-2008 TL
- 2004-2008 TSX
- Honda:
1998-2007 Accord
- 1999-2000 Civic
- 2001-2005 Civic Sedan
- 2002-2005 Civic SI Hatchback
- 1998-2006 CRV
- 2003-2009 Element
- 1999-2007 Odyssey
- 2006-2008 Pilot (Non-Navigation)
- 2003-2005 Pilot
- 1999-2001 Prelude
- 2006-2009 Ridgline
- 2000-2009 S2000
Connections:
- Yellow – 12V Constant
- Red – 12V Accessory
- Black - Ground
- Blue - Power Antenna
- Orange – Dash Light Dimmer/Illumination
- Green – Left Rear Speaker (+)
- Green with Black Stripe Left Rear Speaker (-)
- White – Left Front Speaker (+)
- White with Black Stripe – Left Front Speaker (-)
- Purple – Right Rear Speaker (+)
- Purple with Black Stripe – Right Rear Speaker (-)
- Gray – Right Front Speaker (+)
- Gray with Black Stripe – Right Front Speaker (-)
|
Average Customer Rating is 4.7 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.8 |
| Value | | 4.9 |
| Features | | 4.5 |
| Design | | 4.7 |
| Usability | | 4.7 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
Craig from Meridian, MS
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Makes installation a snap! Wires are clearly marked and works perfect.
|
|
Review by
MICHAEL from NEWTON, KS
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Wiring kit plugged right into the cars wiring and worked great with no modifications.
|
|
Review by
Harry from Castaic, CA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Clipped onto OEM clip, all pins were in the correct spots, no issues during entire radio install. Thanks SE!
|
|
Review by
BRD from Beaumont, CA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I used this to install my radio and it was straight forward. The pins stayed in place unlike other cheap harnesses.
|
|
Review by
Sickboy1999 from Salt Lake City, UT
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I used this harness to install a new Kenwood deck in my Acura TL. I followed the instructions perfectly. I finished the install and the stereo sounded great, but the car had no rear tailights or dash lights. Wish that there would have been more detailed instructions with this harness. Or at least said, "the car you are connecting this to does not use the illumination wire."
|