Why Shop Sonic Free Shipping Free Tech Support Easy Returns Low Price Guarantee Details
Free Kicker active-style headphones with a purchase of $100+ of Kicker Gear

PowerBass ASA 1100.5 (ASA1100.5)

1100W Max, 5-Channel Amplifier

5.0

(1 review)

Read 1 review

Write a review

The product on this page is discontinued.
  • ASA Series 5-Channel Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 75 watts x 4 chan. + 250 watts x 1 chan.
    • 2 ohms: 150 watts x 4 chan. + 500 watts x 1 chan.
    • Bridged, 4 ohms: 300 watts x 2 chan. + 500 watts + 1 chan.
  • Max power output: 2200 watts
  • PWM MOSFET Power supply
  • Remote bass level input (remote level control sold separately)
  • LED power and status indicators
  • Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
  • Soft delay remote turn on/off to prevent pops, clicks, and power overloads
  • 5/3 Channel operation
  • Preamp RCA outputs
  • 4-Way System Protection (SSP) circuitry against impedance over-load, speaker short circuit, thermal overheating, and DC output
  • Variable gain input
  • Aluminum alloy heatsink for heat dissipation
  • RCA level inputs
  • Screw terminals
  • Variable high-pass filter (40-250 Hz, 12 dB/octave)
  • Variable low-pass filter (40-250 Hz, 12 dB/octave)
  • Frequency response: 20-22,000 Hz
  • Dimensions: 18-1/2"L x 9-1/4"W x 2"H
  • 1-year SonicElectronix.com warranty
Product History:
PowerBass ASA 1100.5x thumbnail
(newest, current model)
PowerBass ASA 1100.5 (ASA1100.5) thumbnail
(previous model, replaced by PowerBass ASA 1100.5x)
Power Specifications - Full Range Channels
RMS Power @ 4 ohms75 watts x 4 chan. + 250 watts x 1 chan.
RMS Power @ 2 ohms150 watts x 4 chan. + 500 watts x 1 chan.
RMS Power @ 1 ohmN/A
Bridged RMS Power300 watts x 2 chan. + 500 watts + 1 chan.
Peak Power OutputN/A
Amplifier Specifications
Amplifier ClassAB
Number of Channels5
Total Peak Power Output2200 watts
Total RMS Power Output1100 watts
Maximum Input Gauge Size4 AWG
Minimum Impedance Unbridged2 ohms
Minimum Impedance Bridged4 ohms
THD at Rated RMS Power0.5%
Speaker Level InputsNo
Preamp Outputs1 pair
Built-in CrossoverLow-pass (LP)
High-pass (HP)
High-Pass Crossover Frequency40 - 250 Hz
Low-Pass Crossover Frequency40 - 250 Hz
Subsonic FilterN/A
Signal-to-Noise Ratio94 dB
Channel SeparationN/A
Bass Boost0 - 18 dB
Bass/Gain RemoteOptional (Accessory required and sold separately)
Fan CooledNo
Fuse Rating40A x 2 
Warranty and Return Policy
Return Policy Standard Return Policy
Customer Review Summary for PowerBass ASA 1100.5 (ASA1100.5)
Average Customer Rating is 5.0 out of 5 stars:
5.0
based on 1 Reviews
Share your thoughts with others:
Rating Distribution:
5 star:
.
100%
4 star:
.
0%
3 star:
.
0%
2 star:
.
0%
1 star:
.
0%
what's this?
Average Attributes Rating:
Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0
what's this?
Most Helpful Customer Reviews:
June 7, 2009 Awesome Amp
Review by
Neil from Pembroke Pines, FL
Overall
Durability
Value
Features
Design
Usability
this is by far, the best value amp out there. and super slick good looking. i have it powering 2 tweets, 2 mids and a sub, and its hits. get the optional remote for a complete set
Help other customers find the most helpful reviews
Was this review helpful to you?
Report Abuse | Write a Review
Share on Facebook Share on Twitter Share on Delicious Share on Buzz
Amplifier Wiring Kits
Get the wires you need to properly install and power your car amp.
 ProductPriceAdd?
The InstallBay AK02 by MetraThe InstallBay AK02 by Metra
Budget Conscious 0 Gauge Amplifier Install Kit w/ RCA Interconnects
$59.99
e2 E3200e2 E3200
Dual Amp ~0+~4 Gauge Amplifier Kit with RCAs, Distribution Blocks
$84.99
Kicker PKD1 (09PKD1) Dual Amplifier Installation KitKicker PKD1 (09PKD1) Dual Amplifier Installation Kit
Top Selling Single or Dual Amp 1/0 Gauge Install Kit with Terminals and Distribution Blocks
$209.99
Monster Cable BAP1500Monster Cable BAP1500
1/0 Gauge Single Amplifier Power Kit for up to 1500W RMS
$165.00
Gauge Adapter
In situations where the input gauges on the amplifier is smaller than the power/ground cable gauge, one of these gauge adapters should be used. They are easy to use and enable your amplifier to to still receive all the power that it requires.
 ProductPriceAdd?
Monster PowerQuip Power Cable Adapter (0/1 AWG to 4 AWG)Monster PowerQuip Power Cable Adapter (0/1 AWG to 4 AWG)
Monster 400 Series PowerQuip gauge reducer allows a 0/1 AWG cable to fit in a 4 AWG input
$15.00
Stinger Gauge Reducer (0/1 AWG to 4 AWG)Stinger Gauge Reducer (0/1 AWG to 4 AWG)
Gold plated gauge reducer allows 0/1 AWG cable to fit in 4 AWG inputs
$9.99
Bass Remote Control
Control the volume level of your bass and amplifier from the front of the vehicle.
 ProductPriceAdd?
PowerBass ASA-BASSPowerBass ASA-BASS
Made specifically for the amplifier your viewing.
$19.99
Speaker Wire
Improve the sound quality by delivering more power when replacing your factory wiring. High quality speaker will maximize your amplifier investment and system performance.
 ProductPriceAdd?
Kicker XW1220 Speaker WireKicker XW1220 Speaker Wire
12 Gauge Wire - 20 ft. of Dual Twist Speaker Cable with Sleeves for a Clean Install
$24.49
StreetWires SCP1215BL - 12 AWG Speaker WireStreetWires SCP1215BL - 12 AWG Speaker Wire
12 Gauge Wire - 15 ft. of Speaker Cable with Twisted Construction
$19.99
RCA Interconnects
You will need a good set of RCA interconnect cables to connect your amplifier to your head unit. Using high quality cables ensure the best sound possible by reducing unwanted noise interference, providing tight contacts, and utilizing the latest in cable technology.
 ProductPriceAdd?
Monster Cable 300 Series XLN+ Audio Interconnect CableMonster Cable 300 Series XLN+ Audio Interconnect Cable
16.54 ft. of 6-Channel RCA Cables with 2-way time correct windings and Xtra Low Noise (XLN) construction for optimal signal transfer.
$89.00
Stinger PRO3 Series Interconnect CableStinger PRO3 Series Interconnect Cable
17 ft. of 6-Channel RCA Cable with high-twist construction and ShocKrome end connectors provide a secure fit with top-notch signal transfer.
$31.99
Installation, Tools & Accessories
With our professional install card, you can have your amp installed by a pro near you, or you can purchase tools and do the install yourself.
 ProductPriceAdd?
StreetWires FB4StreetWires FB4
4 AWG / 4 Gauge Firewall Bushing
$7.99
StreetWires FB0StreetWires FB0
1/0 Gauge Firewall Bushing
$4.99
Kicker DB1448 (09DB1448) - Top of the Line!Kicker DB1448 (09DB1448) - Top of the Line!
Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs
$18.99
Professional Installation for your Car Power AmplifierProfessional Installation for your Car Power Amplifier
Covers labor charges through our professional installer network.
$89.99
Testing and Performance
Optimize your system's performance with testing tools such as SPL meters, bass test discs and more!
 ProductPriceAdd?
AutoSound 2000 CD-104AutoSound 2000 CD-104
The ultimate amplifier level setting disc used for evaluation of audio components
$12.99
AutoSound 2000 CD-102AutoSound 2000 CD-102
High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.
$12.99
AutoSound 2000 CD-103AutoSound 2000 CD-103
Audiophile reference series test disc for evaluation of all audio components.
$12.99

Product Summary

Manufacturer: PowerBass
Model number: ASA1100.5
UPC: 823871002986
Weight: 18.00 lbs
Internal SKU: asa11005
Internal product ID: 17147
Musical Mayhem Sweepstakes sponsored by MTX Audio. 3 winners, $2,300 in prizes!

Customer Testimonial

Absolutly fantastic over the phone transaction with Brenden H. Totally hooked me up. The experiance was so good if fact, I'm going to link Sonic Electronix to the the Mazda blog that I am a part of, as the guys are always looking for honest, clean referals for audio components for their cars.

- Jim from Prescott, AZ

See more…

Recently Viewed Items

asa11005 thumbnail

Double DIN 7" TFT-LCD Touchscreen Monitor with Built-in Bluetooth, Navigation Ready, DVD, DivX, CD, MP3 Player and Remote

asa11005 thumbnail

Power Distribution Block with One 4 to 1/0 AWG Input and Two 8 to 4 AWG Outputs

asa11005 thumbnail

1.0-inch 360º Swivel-Mount Clamp (Sold Individually) designed to work with M770-ETX models only