Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Power Acoustik XP-694K

6x9" 4-Way XP Series Coaxial Speakers

Discontinued
|

We apologize

This item has been discontinued

Bundled Savings with this Product

=

Save 25% on a Install Tool Kit!

Save 25% off on the Scosche TK12 install tool kit with your purchase! This kit includes a voltage test light, wire stripper and many other tools you need to install your system!

3.25

17358

500

Power Acoustik XP-694K

$35.95

+

25% OFF

Scosche TK12

$12.99

Special Price $9.74 ($12.99 if purchased separately)

Scosche TK12

12V Car Stereo Installation Kit • Includes Wire Stripper/Cutter, Screwdriver, RCA Cable Runner, Panel Removal Tool, Test Light, and other Installtion Accessories • Perfect for Installing a First Car Stereo

(Offer 1 of 1)

Combined Total Price

$45.69

You Save $3.25

  • 6" x 9" 4-way XP Series Speakers
  • Power Handling:
    • Peak: 840 watts per pair / 420 watts each
    • RMS: 420 watts per pair / 210 watts each
  • Polypropylene injection cone woofer
  • Butyl rubber surround
  • 3/4" Silk dome tweeter
  • 1/2" Piezo tweeter
  • 3 ohms impedance
  • Black texture coat stamped steel frame
  • Chrome back plate
  • 25mm Voice coil
  • 10oz Magnet structure
  • 1-year Manufacturer's warranty

Priced Per Pair

Product History:

Power Acoustik XP-694K thumbnail
(newest, current model)
Power Acoustik XP2K-694 thumbnail
(previous model, replaced by Power Acoustik XP-694K)

Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6" x 9"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
4-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Silk
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Injection Molded Polypropylene (IMPP)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
420 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
210 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
89 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
65 - 20000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
3 ohms

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
88%
4 Star
0%
3 Star
13%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.3
Value
4.9
Features
4.5
Design
4.8
Usability
4.5

MADA

HONOLULU, HI

Overall
Durability
Value
Features
Design
Usability

Awsome buy....

August 12, 2010

This was a great buy for the price. Don't let it fool you. These were an excellent edition to my front component speakers. Wow!!!! You don't need to spend a whole load of money to get great quality sounds. Just get some research and reviews going and you are on your way. Sonic is always a good start

2 of 2 found this helpful

Help our customers find the most helpful reviews

Spellcaster

Oroville,CA

Overall
Durability
Value
Features
Design
Usability

One of the best 6x9's

April 8, 2009

The Power Acoustik XP-694K XP 6x9 speakers are a couple steps up from last years model (XP2K series). Every part of the speaker is better. The surround is a soft rubber than gives the speaker a longer lifespan and not foam like last years, the cone is stiffer, but could even be stiffer, the voice coil is stronger. Power Acoustik changed from the electromagnet to a "regular style" magnet and this magnet is very strong when compared to other speakers in a $40-120 price range. The tweeters are a huge step up from the XP2K's and the basket is coated to prevent rusting. The Power Acoustik XP-694K XP 6x9 speakers sound so much better than last years XP2K, they even sound better than JL Audio's 6x9's (JL Audio's don't produce enough highs), Toyota Tundra JBL System (JBL's don't produce enough highs, but have a lot more bass) and Alpine Type-S (not as clean sounding) series speakers. The mid bass is smooth, but the speaker does need more Xmax so the cone can travel further. The tweeters sound fantastic, not to bright, and you're able to hear so much more detail in a song, recording, or movie. Just so everyone knows powering these with just the CD/DVD head unit will not make these speakers come alive. I'm using a Power Acoustik BAMF 1200/4 4-way amp. The BAMF1200/4 is sending 100 watts to each speaker and they sound so much better compared to when I was powering them with 50 watts each. Make sure your amp is 100 watts at 4 ohms with a Signal-to-Noise Ratio from 95 to 100 for best results. Overall it's a great sounding and very attractive (the grill is ok) speaker, but I can't give it more than 4 out of 5 for performance because of the bass when I compared these to the JBL's. Power Acoustik really needs to increase the 6x9 cone travel. My system in a Toyota Tundra 07 In Dash: 3 Boss DIABLO D35.2 Front Doors: 2 Power Acoustik XP-694K Rear Doors: 2 Power Acoustik XP-653K Sub under rear seat: 1 Earthquake SWS-12 2 Power Acoustik BAMF 1200/4 4-way amps (mid and highs) 1 Power Acoustik BAMF 1250/2 bridged (Subwoofer) 1 POWER ACOUSTIK PCX-30F 30-Farad Capacitor

2 of 2 found this helpful

Help our customers find the most helpful reviews

nick

Canada

Overall
Durability
Value
Features
Design
Usability

good speakers

April 11, 2013

i bought these for my truck and they work good and were cheap im happy with them

0 of 0 found this helpful

Help our customers find the most helpful reviews

Andrew

orem, UT

Overall
Durability
Value
Features
Design
Usability

Finally Some Good Speaker for Cheap

March 23, 2013

I had 3 sets of 6x9's before I landed on these and I am now a fan of power acoustik products. I've used these for over a year pushing over 100 RMS at time's. They cover the mids and highs very well. I would recomend these to someone that knows how to run after market stereos. These are no comp speakers but perfect for starter/semi comp user's

0 of 0 found this helpful

Help our customers find the most helpful reviews

Anthony

junction city, KS

Overall
Durability
Value
Features
Design
Usability

Good sound

December 9, 2011

Speakers sound the best when they are hook up to an amp.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tokenekie

Walnut, CA

Overall
Durability
Value
Features
Design
Usability

Average speakers

August 6, 2011

So-so replacement speakers for the 2007 Honda Accord. The speakers are actually too tall to put the original Honda speaker covers back on, and the covers that come with the speakers actually dont fit in the groves of the car. The biggest issue I had with this product was that the hook up wires that came with the speakers were fragile as hell. It felt like working with dry noodles; the wires kept breaking.

0 of 0 found this helpful

Help our customers find the most helpful reviews

nahuel

Costa Rica

Overall
Durability
Value
Features
Design
Usability

Excellent product

May 30, 2011

It's product very recomended and this seller it's very good

0 of 0 found this helpful

Help our customers find the most helpful reviews

Josh Totty

Appomattox, Virginia

Overall
Durability
Value
Features
Design
Usability

Power Acoustik XP-694K

January 13, 2010

Overall these 6x9s are good and they are definitely worth the price.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Xscorpion USP-69 6" x 9" Speaker Baffles

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $5.99

Items we think you might want

R169X2 thumbnail

Rockford Fosgate R169X2

• Peak Power: 260W
• RMS Power: 130W
• CEA-2031 Compliant Speakers
• Mounting Depth: 2-7/8" • Polypropylene Woofer Cone
• 4 Ohms Impedance
• Sensitivity: 90dB

Your Price $41.95

CS-V6938 thumbnail

JVC CS-V6938

• Peak Power: 800W
• RMS Power: 120W
• 1" Polyetherimide Dome Tweeter
• Mounting Depth: 3-1/8" •Carbon Mica Woofer Cone
• 4 Ohms Impedance
• High Temperature Voice Coil

Your Price $39.95

XS-GTX6932 thumbnail

Sony XS-GTX6932

• Peak Power: 1000W
• RMS Power: 170W
• Polyetherimide (PEI) Balanced Dome Tweeter
• Mounting Depth: 3" • Aramid and Carbon Fiber Woofer Cone
• 4 Ohms Impedance
• Sensitivity: 88dB

Your Price $49.99

Product Summary

Manufacturer

Model Number

XP-694K

UPC

709483031388

Weight

9.00lbs

Internal SKU

xp694k

Internal Product ID

17358

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Power Acoustik XP-694K