Garage
Shop

Hifonics BXi 2610D

2600W RMS, Brutus BXi Series Class D Monoblock Amplifier (BXi2610D)

Hifonics
Shop all Hifonics
Product videos
highlight-star-icon

2600W RMS, Brutus BXi Series Class D Monoblock Amplifier • 850W x 1 Chan. @ 4 Ohms • 1700W x 1 Chan. @ 2 Ohms • 2600W x 1 Chan. @ 1 Ohms • Super D-Class • Tuned Bass EQ • 1 Ohm Stable • Balanced Line Input

Learn more about the bxi2610d

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

brx24161d thumbnail

Hifonics Brutus BRX2416.1D Monoblock Amplifier

OUR PRICE: $224.99

View item

Product Highlights


2600W RMS, Brutus BXi Series Class D Monoblock Amplifier • 850W x 1 Chan. @ 4 Ohms • 1700W x 1 Chan. @ 2 Ohms • 2600W x 1 Chan. @ 1 Ohms • Super D-Class • Tuned Bass EQ • 1 Ohm Stable • Balanced Line Input

Description


Hifonics brand icon

Authorized dealer

Brutus: The King of D-Super

When it comes to class D monoblock amplifiers, Brutus amplifiers are truly the king of D class. Brutus BXI amps are considered some of the best amplifiers in the world and the new Super-D Class Brutus amplifiers reinforce that. The D-Class digital chip-set technology produces extremely efficient, low temperature, and a high amplification system resulting in a smooth digital to analog conversion with low distortion. The amplifiers stable at 4, 2, and 1 Ohm(s). All in all, that means that the amp will produce more output with less stress on the car's battery and charging system.

  • Brutus BXI Single-Channel Monoblock Super-D Class Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 850 watts x 1 chan.
    • 2 ohms: 1700 watts x 1 chan.
    • 1 ohm: 2600 watts x 1 chan.
  • MOSFET Power supply
  • Super D-Class amplifier relies on a super-speed enhanced chip-set to produce higher current capacities and more precise digital to analog conversions
  • Link & Sync feature allows the mono amps to be strapped or bridges via master/slave configuration
  • Wired remote bass level control included
  • Power and Protection LED indicators
  • Built-in system diagnostics offer protection of DC, Speaker short, terminal, and overload
  • Tuned Bass EQ (0-10 dB bass boost at 45 Hz)
  • Dampening factor: >250
  • Single-channel monoblock channel operation
  • 1-Ohm stable
  • Phase shift: 0-180 degrees
  • Preamp RCA outputs
  • Input level control: 0.04V - 18V
  • Balanced line input for MX accessories and line drivers
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • RCA level inputs
  • Screw terminals
  • Variable low-pass filter (35-250 Hz, 24 dB/octave)
  • Subsonic Filter (15-35 Hz at 24 dB)
  • Frequency response: 35-250 Hz
  • Dimensions: 17-3/4"L x 9-1/2"W x 2-1/2"H
  • 0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year SonicElectronix.com warranty

Product history:

Hifonics BRX2416.1D thumbnail
(newest, current model)
Hifonics BRX2400.1D thumbnail
(previous model, replaced by Hifonics Brutus BRX2416.1D Monoblock Amplifier)
Hifonics BRZ2400.1D thumbnail
(previous model, replaced by Hifonics Brutus BRX2400.1D)
Hifonics BXi2610D thumbnail
(previous model, replaced by Hifonics Brutus BRZ2400.1D)
Hifonics BXi2608D thumbnail
(previous model, replaced by Hifonics BXi 2610D)
Hifonics BXi2607D thumbnail
(previous model, replaced by Hifonics BXi 2608D)

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
850 watts x 1 channel
RMS Power @ 2 ohms
1700 watts x 1 channel
RMS Power @ 1 ohm
2600 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
2600 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
0.08%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
35 - 250 Hz
Subsonic Filter
15 - 35 Hz
Signal-to-Noise Ratio
95 dB
Bass Boost
0 - 10 dB
Remote bass/level controller
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

BXi2610D

Weight:

19.00lbs

Internal SKU:

bxi2610d

Internal Product ID:

17599

Product and How-to Videos


Customer Ratings & Reviews



5 star
89%
4 star
11%
3 star
0%
2 star
0%
1 star
0%



Durability
4.9
Value
5
Features
4.9
Design
5
Usability
5

Customer Reviews

Sort by:

Loading...

hifonics bxi2610d

This amp is very powerful. You cant beat it for the price.

By art on March 26, 2010

19

found this helpful.

its a beautiful thing

hello everyone its me again just had to wright another review on the hifonics bxi 2610d i own two of these monsters and i tell you that they are the best amps i have ever owned i really like the power that they put out i have them hooked up to to orion hcca12.2 one on each in a ported box built to the specs and all i can say is wow i tell my friends listen at your own risk lol it is a beautiful thing thanks sonic i will be getting at you soon

By la on February 23, 2010

16

found this helpful.

good amp

a good solid amp to power down to 1 ohm. however, there is a deficiency with output if your voltage starts to slip...highly recommend a second battery

By paul on November 10, 2009

16

found this helpful.

big bang for low price

this amp puts out ridiculous amount of power and is rated at 14,4 volt.
im powering an 18 btl with the 2610 and its freaking loud. before i had a zx 1500.1 which cost much more than the hifonics. but the 2610 is just an awesome amp!! make sure to have a couple of good batteries to feed this beast!

no reason not to buy the bxi unless you want to spend tons of money on "high quality" products.

By Markus on March 3, 2010

14

found this helpful.

Very very good value

I was very pleased with this amp, it was exactly what I expected. Brilliant build quality and very durable, which is expected when buying Hifonics products. Would 100% recommend this amp for anyone wanting power combined with good build quality and good looks.

By Mr.Singh on January 19, 2010

15

found this helpful.

Great amps

I have 2 of these 2600 watt monsters that are pushing 2 18 inch Fi BTLS
i am pushing them very hard these Hifonics amps are no joke with more than one you need to upgrade your electrical i would definitely recommend this amp to someone who craves that 150+db

By Aaron on September 15, 2009

15

found this helpful.

Good starter amp

A little power hungry, I ran mine on 15.5v at 0.6ohm before rise and never a problem. Good first amp, if you have the proper electrical.

By DCdodge10 on September 30, 2011

14

found this helpful.

Best amp!!!

This amp has a lot of power .... I have owned mtx elite 1501d, kenwood, precision power, kicker, rockford fosgate, and alpine ... this amp so far beats them all!!!!!! NO LIE this amp satisfies ... The bass i get is so deep and low it makes my trunk look like its going to fall off all my friends tell me that the bass sounds clean and DANGG!!! that s*** hits..... so if your looking for true power this amp has it, you just have to make sure you have the BIG 3 with 0 gauge, upgraded battery n kinetik in the trunk, n upgraded alternator if you wanna see what this amp can REALLY do..... don't expect much if you have stock everything... Sooo don't think about it just buy it you wont regret it.

By G on April 3, 2010

13

found this helpful.

a must buy

this amp is a monster puts out tons of powers hifonics is the masters of the D class hands down the bxi 2610d is sick! . great buy great price

By B4 ever on June 10, 2009

14

found this helpful.

Whoa!!!

As if we didnt all ready know Brutus was the best, i hook this to 3 kicker CVR's and it blew one. this was the best amp i ever owned.

By Deandre on April 18, 2009

14

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


BXi2610D small

Item added to your cart.

Price: $329.99

Essential add-ons
Belva BAK02 1/0 Gauge Amp Wiring Kit

The perfect kit for your perfect amp!

$69.99

$44.99

Add to cart
Belva BAK02BL

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - BLUE

$69.99

$44.99

Add to cart
Stinger SSK0

1/0 Gauge Amplifier Wiring Kit with 2-Channel RCA's

$93.00

$39.95

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
X Series RCA Interconnect Cable

16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors

$29.99

$18.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
T-Spec V8-3DDC

3.0 Farad Capacitor with Digital Read-Out and Built-In Distribution Block

$116.00

$89.00

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

$14.00

$7.99

Add to cart
0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

$9.99

$4.99

Add to cart
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

$9.99

$4.99

Add to cart
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

$11.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon