Expert Service 1-661-257-9993 [Hours]

Eclipse XA1200

600W Max, XA Series Class D Monoblock Car Amplifier (XA-1200)

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

Eclipse XA1200

600W Max, XA Series Class D Monoblock Car Amplifier (XA-1200)

$179.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$22.99
Add Warranty
3 years of protection

Belva 1.0 Farad Capacitor + Amp Kit

BB1D 1.0 Farad Capacitor + BAK42 Complete 4 Gauge Amplifier Wiring Kit

$39.99

Add
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$12.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$199.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Eclipse XA1200.

Get FAST answers from customers ASK a Question See questions answers

Eclipse ICEpower

Following the long tradition of award winning electronics, Eclipse introduced their highly innovative amplifiers. The Eclipse XA1200 monoblock amplifier follows strictly that tradition and the result is an incredibly efficient amplifier made for subwoofers. This single channel amp is designed and engineered specifically with the intent to push a subwoofer clearly, efficiently, and without the distortion that other amplifiers produce. Using Eclipses latest technology, the XA1200 features ICEpower. This means that the amplifier produces superior audio quality, is housed in a compact case, reduced energy demand, and amplifier reliability. Heat is kept low with the digital processors inside the amplifier, resulting in an increased power output. The amp is quite small when compared to how much wattage that it is able to produce. At 4 ohms, the XA1200 produces 350 watts and 500 watts at 2 ohms. That is more than enough wattage for any entry-level system, up to a high-end advanced system. The package includes a bass level remote so the user can adjust the bass level from the front seat without having to adjust any setting on the amplifier itself.

SonicElectronix.com is offering an online special with these amps and we are passing the saving on to you! We have drastically reduced prices on these incredible amplifiers. If you are looking to install a new subwoofer in your vehicle, then consider the Eclipse XA1200 to power that subwoofer. With a deal this good, it is hard to pass up the opportunity.

Product Features:
  • XA Series Class D Monoblock Car Amplifier with ICE Technology
  • RMS Power Rating:
    • 4 ohms: 350 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
  • Max power output: 600 watts
  • MOSFET switching power supply
  • ICEpower class D design
  • Wired remote bass level control included
  • LED power indicators
  • Bass Boost (0-8 dB at 50 Hz)
  • Bass boost frequency selection (32-64 Hz)
  • Mono channel operation
  • Protection temperature (90 C)
  • Heavy duty aluminum alloy heatsink
  • RCA level inputs
  • Screw terminals
  • Variable low-pass filter (40-200 Hz, Linkwitz Riley 18 dB/octave)
  • Subsonic Filter (18 dB at 20 Hz)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-20,000 Hz
  • Input sensitivity: 1.2V-8V
  • Damping Factor: 90
  • Dimensions: 10-1/4"L x 10-1/8"W x 2-3/8"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year SonicElectronix.com warranty
You can learn more about the XA1200 at our blog.

Product History:

Eclipse XA1200 thumbnail
(newest, current model)
Eclipse XA1000 thumbnail
(previous model, replaced by Eclipse XA1200)

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

350 watts x 1 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

500 watts x 1 channels

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.

Power Specifications - Full Range Channels

Peak Power @ 4 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Bridged Peak/Max Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the Peak/Max power created once an amplifier is bridged.

Power Specifications - Subwoofer Channel

Peak Power @ 4 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Peak Power @ 1 ohm
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

600 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

500 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 500 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
20 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
80 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 8 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
40A x 2 
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
76%
4 Star
15%
3 Star
3%
2 Star
3%
1 Star
3%

Average Attribution Rating

Durability
4.6
Value
4.8
Features
4.4
Design
4.9
Usability
4.8
E30zen

Las Vegas NV

Overall
Durability
Value
Features
Design
Usability
GREAT Amp

June 8, 2010

For the power class it is in, this amp is more than great. I'm sure amps with the same juice that cost much more money are on the same plain with it. Believe me, you will not find a better amp for the money. With my amp in the middle on my gains, filters, and frequencies, it does more than the job needed. This great deal at sonic is what got me to get it, and well worth it. What more can you expect from Eclipse... a great quality brand that is made in JAPAN. Not china or vietnam or mexico in a sweatshop, JAPAN. This amp is quality and I have had it for a while and it is showing no signs of wearing down.

15 of 17 found this helpful

Was this review helpful to you?

matt

North Jersey

Overall
Durability
Value
Features
Design
Usability
always cold, ALWAYS working

June 25, 2010

Ive had this for about 4 months now (+ an Eclipse ea4200 4 chan) - and it runs ice cold at full power. Seriously, while my buddies' amps are going into protection mode this one will push full power for EVER - no problems evvvver.

Its also underrated. 500 rms? Trust me I blew out my Clarion srw1251 and I wouldn't be surprised if I blow out my Fosgate P3. (my fault of course)
It even lists in the manual that it does 600 rms at higher THD.

This is about the only thing in my whole car's system that has not in any way disappointed. Its also way way WAY cheaper than it should be. Get it

14 of 16 found this helpful

Was this review helpful to you?

Ted of Smeg

Carter, SD

Overall
Durability
Value
Features
Design
Usability
Great buy

January 6, 2010

Great sound quality, very efficient, and cheap.

14 of 17 found this helpful

Was this review helpful to you?

Donald

Australia

Overall
Durability
Value
Features
Design
Usability
Excellent amp!

June 22, 2010

I purchased this amp to power my Eclipse SW9102 titanium subwoofer. Though the subwoofer can handle twice as much power as I'm feeding it, this one 10" sub rumbles like mad with this amp! I definitely recommend this amp and recommend sonicelectronix to anyone looking for a great deal with super fast shipping even overseas. Thank you!

12 of 14 found this helpful

Was this review helpful to you?

cool runner

ct

Overall
Durability
Value
Features
Design
Usability
Eclipse XA1200

June 16, 2010

It's a great amp for my needs. It has 60 watts x 4 channels and it is great for all my needs. Plus i also have an eclipse one channel mono bass amp for my box as well. Hope this helps all of you out there

12 of 14 found this helpful

Was this review helpful to you?

Matt

Maryland

Overall
Durability
Value
Features
Design
Usability
Great value, but not the amp I expected

May 31, 2010

The amp is good but I have one problem with it. In order to get the most power out of it, and to even hear the subs whatsoever, you have to have the bass boost all the way up. If bass boost isn't on, you can't hear the subs at all, but when it is up, it really pushes the subs and sounds great. I know this amp will really last a long time. Well built.

12 of 14 found this helpful

Was this review helpful to you?

Timothy

Grand Prairie, TX

Overall
Durability
Value
Features
Design
Usability
Maybe I got a Bad One... But it Sucked!!

May 24, 2010

OK.. a little back specs for you.. Running a single 12" Kicker Solo DVC (Dual 4ohms) @ 2 Ohms. Running a Kicker 250.2 Wired to 2 Ohms.. Basically, im barely pushing the sub.. So I was looking for an Inexpensive upgrade and Ran into this Amp. Reviews looked good Except for 1 person saying it didn’t push his sub as hard as his smaller amp did. So, I pulled the trigger and when it arrived.. Installed in immediately.

Now the Bad news.. The amp didn’t even push the sub as much as the 250.2. I cranked up the Levels and the Bass Gain.. Nothing.. Verified that the Amp was getting enough Volts (14.38), Verified the RCA signal was good, and Re-Ohmed out the Sub with a Multimeter. Basically Nothing... The amp was horrible and just busted my bubble. Im hoping that that I just got a bad amp. Everyone but 1 person worked fine. My recommendation would be to be very cautious about the Amp..

12 of 14 found this helpful

Was this review helpful to you?

Tiller miller

Goshen, Indiana

Overall
Durability
Value
Features
Design
Usability
Fantastic amp

August 31, 2010

I had this in my 01 eclipse spyder and it sounded so good that someone broke into it and stole it, I'm pretty sure they like it too cause they never returned it. True story, and I've got pictures to prove. But I was extremely happy of the quality and looks it had, best of all the entire radio system matched the car name, both amps, 4 interior speakers, 2 subs, and 2 capacitors. Very good deal, I would highly recommend the fujitsu eclipse name.

11 of 13 found this helpful

Was this review helpful to you?

mike

ormond beach,fla

Overall
Durability
Value
Features
Design
Usability
good buy

May 29, 2010

signal source 8 volts from eclipse 7200mkii. hooked to cliff designs 10 in a slot port enclosure @ 2ohms ran it for an hour or so never really got warm. Was impressed. Seems to hold true to 500 watt rating, overall very happy with product and sonic as always!

11 of 13 found this helpful

Was this review helpful to you?

Jihad

Baltimore, MD

Overall
Durability
Value
Features
Design
Usability
Honestly Not Impressed Yet

May 21, 2010

My previous amp was a memphis sc4.55. That's a tiny 4 channel amp that i had 2 channels bridged @ 230w pushing my 12" sub. It sounded good so I figured if I got a more powerful amp (this amp with 500w) it would much better than before. I was wrong, With this amp I had the gain 80% up the boost on my radio at 10(max) and volume at 35 just to get it to sound similar to my memphis at 80% gain, +2 boost on the radio, and volume at 28. Again all I changed was my amp. It has gotten better over a couple days with a few more adjustments, i guess my expectations were high. I'm only rating durability average because i haven't owned it long enough

11 of 13 found this helpful

Was this review helpful to you?

Ev

Germantown, OH

Overall
Durability
Value
Features
Design
Usability
Awesome Amp!

November 6, 2013

The price is great, awesome little amp that produces an amazing sound! Has been going strong for me for almost 4 years now! LOVE IT!

10 of 12 found this helpful

Was this review helpful to you?

DAVID

ACWORTH, GA

Overall
Durability
Value
Features
Design
Usability
Nice Subwoofer Amp.

August 30, 2010

This amp has powered my single 10" Pioneer TS-W2502D2 flawlessly for months now. Great value.

10 of 12 found this helpful

Was this review helpful to you?

Pat

Orlando, florida

Overall
Durability
Value
Features
Design
Usability
a+ all around in this amp. 5 stars

August 29, 2010

Runs my subs stable and stays cool at a good price.

10 of 12 found this helpful

Was this review helpful to you?

Travis

Hobart, OK

Overall
Durability
Value
Features
Design
Usability
very good amp

August 6, 2010

one of the best amps for the price... to bad it was only limited quantity

10 of 12 found this helpful

Was this review helpful to you?

Rob

Louisville, KY

Overall
Durability
Value
Features
Design
Usability
Great value and a great amp!

June 1, 2010

I would definitely recommend this product. It is a great deal from SonicElectronix and definitely puts out a great punch. I didn't need an amp that would power my sub enough to blow the trunk off. I was looking for an amp that would put out a great punch and not require a lot of power. This amp is exactly that. I have it powering a 12 inch pioneer and it hits hard. It can wake up everyone on my street if I want it too, but I usually listen to it on a more comfortable setting about half to 3/4 its capacity. When I do want it to bump HARD it will however. I was skeptical when I bought it, but am definitely a believer now and this amp is great.

10 of 12 found this helpful

Was this review helpful to you?

Rosemary

New Britain, CT

Overall
Durability
Value
Features
Design
Usability
great amp

April 11, 2010

I just received this amp and let me tell you its great. I've owned many amps and this one puts out alot of power for being such a small amp. I have it connected to a alpine type r and it makes it pound. The best thing about it is that it very efficient my previous phoenix gold amp just make my lights dim and get very hot with this one its totally the opposite a must buy

10 of 12 found this helpful

Was this review helpful to you?

Brother Jon

prescott valley ,AZ

Overall
Durability
Value
Features
Design
Usability
The best bang for your buck !!!

December 29, 2009

I am dead serous, you will not be disappointed. I owned a Jensen power 1050 in the past and this amp kills it, no competition. Plus the service by sonicelectronix.com is unmatched. I order the amp on Monday the following Tuesday i was paying a local shop to install the amp.

P.S. Don't hesitate if this amp fit's your application. Trust me, just do it you won't regret it.

11 of 14 found this helpful

Was this review helpful to you?

Apolloshep

Charlotte, NC

Overall
Durability
Value
Features
Design
Usability
Good amp for the $$$$

September 16, 2010

I purchased this amp for 130.00, I see it has gone up a bit. I am powering one 10" Pioneer shallow mount sub (2 ohm). I have to have the bass cranked all of the way up to get some bass, but I think this is due to the shallow mount sub. I have had it for several months so far and it has had no issues. It was one of the few amps for the money that has 4 gauge power & ground inputs (the main reason I purchased it) and gold to boot! It looks very sharp, to bad it sits behind the seat. The amp is actually made by Fujitsu - at least that is what the box says. I would recommend this product for budget minded consumers.

9 of 11 found this helpful

Was this review helpful to you?

Bryan

Alton, IL

Overall
Durability
Value
Features
Design
Usability
Pretty good amp

October 4, 2010

I got this amp hooked up to two 12" JL Audio's and it sounds really good!

8 of 10 found this helpful

Was this review helpful to you?

JAY

st.pete .FL

Overall
Durability
Value
Features
Design
Usability
coool amp

September 13, 2010

This is a excellent amp.I have it powering two 12s in a competition box. The bass is clean and smooth. I recommend this amp for small applications and first timers.

8 of 10 found this helpful

Was this review helpful to you?

Mike

Olive Branch, Ms

Overall
Durability
Value
Features
Design
Usability
Haven't hooked it up yet!

May 4, 2010

I haven't got the chance to hook it up and check it out but it was exactly as shown and came factory sealed also. I got ripped off by another company called D*****C***C******* so to buy something and it come like shown is a huge plus. fast shipping and it looks awesome. it will push my 10CVX12 just fine im sure. For it to be a small amp it is quite heavy so I am sure its made good.

9 of 12 found this helpful

Was this review helpful to you?

B

Federal Way, WA

Overall
Durability
Value
Features
Design
Usability
Eclipse XA1200 Review

April 11, 2010

I bought this amp for $109 at Sonic's Black Friday sale around Christmas, which is by far cheaper than any comparable amp. I have it mounted in a tight space behind my rear seat, and it still runs cool. It's paired with a Pioneer Premier 10" sub (also purchased from Sonic), and the combo sounds great!

7 of 8 found this helpful

Was this review helpful to you?

jon

Eden, NY

Overall
Durability
Value
Features
Design
Usability
Eclipse XA1200

February 6, 2010

great amp. hooked up to 2 kicker comp 15". kicks hard. great amp for the money.

7 of 8 found this helpful

Was this review helpful to you?

Eveaskulleader

timonuim maryland

Overall
Durability
Value
Features
Design
Usability
AMAZING AMP

September 12, 2010

This little dude is powerful i have it powering one P3D410 and it takes it all. The sub is in a ported box i made and the roof in my truck rattles so hard i had to buy dynamat. I will be buying another one soon!!!!!

7 of 9 found this helpful

Was this review helpful to you?

Brandon

Boiling Springs, SC

Overall
Durability
Value
Features
Design
Usability
Great Amp

March 25, 2010

I have this amp powering a Boston Acoustics G3 10" sub and man does this combination sound awesome! Great amp. You can not beat the quality and value at this price!

6 of 7 found this helpful

Was this review helpful to you?

Matt

Ludlow Ma

Overall
Durability
Value
Features
Design
Usability
Ok..

March 23, 2010

I have one of these pushing 2 kicker CVR 12's, and its just simply not enough power. I didnt have a big budget so i shouldn't expect that much from a 129$ amp. Eventually ill probably get a kicker ZX750.1, but for now this will suffice. Even though it doesn't put out the power i really need, it does look really slick and cool with the blue led light and shiny casing. It also seems to stay very cool which is great.

7 of 9 found this helpful

Was this review helpful to you?

Erik

Cary. NC

Overall
Durability
Value
Features
Design
Usability
Sick Amp

March 3, 2010

Best amp i have ever purchased, truly 500W power, sick outputs and crazy efficiency, this thing never over heats. Great amp for an even better price, buying another one soon.

6 of 7 found this helpful

Was this review helpful to you?

Adrian

Millington, TN

Overall
Durability
Value
Features
Design
Usability
Excellent Amp

February 5, 2010

This is a nice amp for the money. Very nice design and will make your sub hit!!!

6 of 7 found this helpful

Was this review helpful to you?

Sean

Rockwall, Texas

Overall
Durability
Value
Features
Design
Usability
Good little amp

June 17, 2010

I had this amp for a few months, but I ended up selling it, because it doesn't do rated power. My 10 year old MTX amp at 8Ohms moved my 12" Type-R better than this amp at 2ohms. I replaced the Eclipse with an Audiopipe AP-15001D, and haven't looked back. I would guess that it only does about 300-350 Watts max though. Even with the gain all the way up and the bass boost turned all the way up at my box's tuning frequency, it wasn't really hitting very well. I would recommend this amp to someone who wants decent sound quality but not anything terribly loud. It's not a bad amp, It's just not my kind of amp,

6 of 8 found this helpful

Was this review helpful to you?

Shaun

Springvale, ME

Overall
Durability
Value
Features
Design
Usability
Insanely good value

February 16, 2010

This amp is powering a 12" Kicker CVX124 at 2 ohms and makes that sub pound hard!! I couldn't believe how nice, tight and flexible the sound was. Hits the lows like a champ and hits you in the chest when a killer metal tune is being played. I've always had great luck with Eclipse products and for this price you won't find a better amp.

6 of 8 found this helpful

Was this review helpful to you?

JP

Goldsboro, NC

Overall
Durability
Value
Features
Design
Usability
Great Value!

April 1, 2010

I have this amp connected to my P3d124 it powers this sub no problem. I will note that the P3 is proven to handle more power than this amp can deliver. The bottom line is excellent quality amp for 130$, you wont find better at this price. Seems to run cool too. Also not sure about the review stating this amp barely made a p3 move. Possibly a faulty amp or wired incorrectly. P3d124 wired in parallel 2-ohms the 500 watt rms this amp is rated at seems quite accurate. I previously had this sub on a Rockford p6001BD and it sounds extremely similar. I run about 50% gain no bass boost and my sub slams. Great Product. Get it while it lasts.

5 of 7 found this helpful

Was this review helpful to you?

nick

Tigard, OR

Overall
Durability
Value
Features
Design
Usability
Excellent amp for the price

February 23, 2010

you arent going to find an amplifier in this price range with the rms and efficiency that this amp has. Also very compact and small for an easy install. eclipse is a very respected company and there products are top notch. This amp is a steal for what your getting. Do not buy a boos or power acoustik even if they are supposedly 1000watts rms they are probably really closer to half that and horrible efficiency. Only buy amplifiers that are CEA 2006 certified because the ones that arent are going to be way off on there true power. The CEA rating helps to keep company's from lying about there power ratings like so many cheap brands do and that is why lanzar and boss etc...are not CEA certified.

4 of 5 found this helpful

Was this review helpful to you?

MEf

San Antonio, TX

Overall
Durability
Value
Features
Design
Usability
There was something wrong with it straight outta the box

February 2, 2010

I dont know about this amp, I would probably advise to go with a reputable brand like kicker or rockford. I got one of these and it would not push a single RF P3 properly, it barely moved and i could barely hear it over my front speakers. The amp was installed professionally and checked at two different stores (yes at my expense) and they just couldnt find out what was wrong with. It wasnt going into protect, and it WAS putting out power, it seemed like it was just weak. After much hassle i decided to replace it with a kicker 400.1 without changing anything else whatsoever and man what a difference!! The eclipse got owned by an amp rated at 400 watts without the gains nor boost cranked. The eclipse barely moved with everything at max. Im now unconvinced by this new "ice" technology. Good thing i bought it at sonic as they will take the return and apply the credit towards a different amp :D

5 of 7 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Belva 1.0 Farad Capacitor + Amp Kit

BB1D 1.0 Farad Capacitor + BAK42 Complete 4 Gauge Amplifier Wiring Kit

Your Price $39.99

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $89.99

Stinger SK4641 4 Gauge Wiring Kit

Get a high quality amp kit from Stinger to get the most from your new amp!

Your Price $62.95

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

Your Price $29.99

NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

Your Price $12.99

PAC LP7-2

L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On

Your Price $21.95

AudioControl LC2i

2 Channel Line Out Converter with AccuBASS & 5-year warranty*!

Your Price $79.99

Kicker KISLOC

2-Channel K-Series Speaker Cable to RCA Adapter with Line Out Converter

Your Price $24.95

AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

Your Price $199.99

The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $129.99

AudioControl THE-EPICENTER-WHITE

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

Your Price $139.99

NVX XBBR

Looking to fine tune the bass in your vehicle? Look no further

Your Price $79.99

Kicker KI24 K-Series RCA Audio Interconnect Cable

4 Meters (13 ft.) 2-Channel K-Series RCA Audio Interconnect Cable

Your Price $15.95

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $15.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

XS Power BIG3XS 100% OFC 1/0 Gauge Big 3 Upgrade Kit

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

Your Price $92.52

270 Amp G Series Alternator for Select 1994-2012 GM Vehicles

Most Popular! 270+ amps at anything above 1800 rpm engine speed!

Your Price $448.89

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

240 Amp L Series Alternator for Select 1963-1985 GM Vehicles

Specifically designed to fit in tight spaces

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

320 Amp S Series Alternator for Custom and Racing Applications

Great for a Custom Project

Your Price $499.00

XS Power XP750 Special Edition

12-Volt Deep Cycle AGM Power Cell with 750 Max Amps

Your Price $72.99

Kinetik HC600-BLU

BLU Series 600 Watt 12V High Current AGM Car Audio Power Cell

Your Price $49.99

XS Power D545

12-Volt Deep Cycle AGM Power Cell with 800 Max Amps

Your Price $109.99

NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

Your Price $89.99

Rockford Fosgate RFC1D - Top of the Line 1 Farad

Digital 1.0 Farad Car Audio Capacitor for up to 1000W Max

Your Price $99.99

Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

Your Price $21.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Scosche TK12

The perfect kit for installing a car stereo and amplifier for the first time

Your Price $18.99

Five Piece Installer's Panel Removal Tool Kit

Remove panels the right way (Durable Nylon Plastic Pry & Chisel Tool Set

Your Price $11.99

Universal Wire Puller

Make your installation less of a chore and save yourself the stretch

Your Price $7.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $1.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $4.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $4.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $39.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $69.97

240 AMP 3-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $124.99

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $3.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $3.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $5.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $6.21

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

XA1200

UPC

873549004200

Weight

9.50lbs

Internal SKU

xa1200

Internal Product ID

17801

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Eclipse XA1200