The Peripheral CHYAH08 allows for the installation of an aftermarket radio in 2005-2009 Chrysler, Jeep, and Dodge vehicles utilizing the CAN Bus data system. The CHYAH08 is packaged with both Chrysler harnesses for an all-in-one radio replacement solution. The interface provides a data controlled accessory output wire and all the necessary output wires for a navigation radio install. When retaining the use of the factory steering wheel controls, the C2R-CHY4 provides a SWC Output connector for direct plug and play connectivity to all PESWI-modules (PESWIX, PESWIAKJC, PESWIPS, PESWIECL2).
- Replacement interface harness for select Chrysler vehicles with CAN Bus
- Compatible with amplified or non-amplified systems
- No longer requires the use SWI-CAN Module to retain steering wheel controls
- Retain Accessory Power (RAP) 12V Output
- VSS, illumination, parking brake and reverse trigger output
- Digital amp turn-on
- 1-year Manufacturer's warranty
- Check the General Installation Manual to see basic instructions for the PAC C2R-CHY4
Compatible with the following GM Vehicles:
- Dodge:
- 2007 - 2008 Avenger
- 2004 - 2008 Durango
- 2005 - 2008 Magnum
- 2005 - 2008 Dakota
- 2005 - 2008 Charger
- 2005 - 2008 Grand Cherokee
- 2005 - 2008 Commander
- 2006 - 2009 Ram Pickup
- 2006 - 2008 Caliber
- 2008 - 2009 Challenger
- 2009 Journey
- Chrysler:
- 2007 - 2008 Aspen
- 2007 - 2008 PT Cruiser
- 2008 Caravan
- 2007 - 2008 Sebring
- Jeep:
- 2007 - 2008 Compass
- 2007 - 2008 Patriot
- 2007 - 2009 DTS
Connections:
- Yellow – 12V Constant
- Red – 12V Accessory
- Black - Ground
- Orange – Dash Light Dimmer/Illumination
- Green – Left Rear Speaker (+)
- Green with Black Stripe Left Rear Speaker (-)
- White – Left Front Speaker (+)
- White with Black Stripe – Left Front Speaker (-)
- Purple – Right Rear Speaker (+)
- Purple with Black Stripe – Right Rear Speaker (-)
- Gray – Right Front Speaker (+)
- Gray with Black Stripe – Right Front Speaker (-)
Customer Service
