Expert Service 1-877-289-7664 [Hours]

Expert advice for 14 years

Visonik VPB210PK Bass Stimulus Package

Amplifier with Bass Remote + Amp Kit + 2 10" Subwoofers in Sealed Enclosure

Discontinued
|

We apologize

This item has been discontinued

Visonik 10" Bass System

Get everything that you need for entry level bass with this convenient subwoofer package! Visonik includes everything that you need to install a dual 10" loaded enclosure. This 10" bass stimulus package includes the subwoofers, amplifier, black enclosure, and amplifier kit!

There are a total 1000 watts max power handling for the system (500 watts RMS!). The amplifier is pumping 400 watts RMS to the 2 subs (200 watts RMS to each woofer). Each sub handles 250 watts RMS and the 200 watts to each is plenty of power. You will see that this system rocks and that Visonik did an amazing job to build it to perfect specs!

Enclosure Features:
  • Dual 10" loaded enclosure
  • Box volume: 1.00 cubic feet
  • Made from 1/2" MDF construction
  • Covered in black carpet
  • Dimensions: 7-3/4"D1 x 9"D2 x 22-5/8"W x 12"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Subwoofer Features:
  • 10" 4 Ohm Visonik Subwoofers
  • Peak Power Handling: 1200 watts for system / 600 watts each woofer
  • RMS Power Handling: 600 watts for system / 300 watts each woofer
  • Impedance: Single 4 ohm
  • Polypropylene cone
  • Rubber surround
  • Impact resistant cone
  • 1.5" Voice coil
  • Double charged ferrite magnet
Amplifier Features:
  • Visonik Power Play 2-Channel Car AB Amplifier
  • RMS Power Rating:
    • Bridged, 4 ohms: 400 watts x 1 chan.
      • It will be running in bridged mode and each sub will receive 200 watts. The install manual shows you how to do wire the subs. It is simple.
  • Full MOSFET power supply
  • Wired remote bass level control included
  • Power and protection LED power indicators
  • Tuned Bass EQ (0-12 dB bass boost at 50 Hz)
  • RCA Line inputs
  • 2/1 Channel operation
  • Heavy duty aluminum alloy heatsink for heat dissipation
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Variable high-pass filter (50-500 Hz, 24 dB/octave)
  • Variable low-pass filter (50-250 Hz, 24 dB/octave)
  • Frequency response: 20-25,000 Hz
  • Dimensions: 8-5/8"L x 6-7/8"W x 1-1/2"H

Amplifier Power Specifications

Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

400 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

400 watts
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
4 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.10%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 500 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 250 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
90 dB
Channel Separation
Also referred to as crosstalk. The amount of interference on one stereo channel caused by the leaking of the other stereo channel. The higher the rating in decibels (dB), the better the Channel Separation.
55 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
25A x 1 

Subwoofer Specifications

Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Sealed

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
46%
4 Star
21%
3 Star
4%
2 Star
18%
1 Star
11%

Average Attribution Rating

Durability
3.7
Value
4.1
Features
3.6
Design
4.2
Usability
4.2

Dennis

Halifax, PA

Overall
Durability
Value
Features
Design
Usability

Amazing

September 13, 2010

I bought this bundle last december i have been extremely happy with this product thus far. I just purchased 2 pioneer 1000 watt subwoofers to replace the originals but is till have the amp again great buy highly recommend this to anyone looking for a good bump, and for those who dont wish to spend much. Definitely a 5 out of 5!

4 of 4 found this helpful

Help our customers find the most helpful reviews

earl

belleville, IL

Overall
Durability
Value
Features
Design
Usability

very good.

April 13, 2012

i bought this package at my beginner days lol. i have this in my trailblazer, this packaged thumped just as loud as my 4200watt boss package i just bought so you do the math. really good bang for your buck!

2 of 2 found this helpful

Help our customers find the most helpful reviews

Jordan

Oak Grove, MO

Overall
Durability
Value
Features
Design
Usability

Pleased!

June 19, 2012

I have had this package for a while. I havent had subs before. These subs are GREAT beginning subs. They are plenty loud enough for me right now. Havent had anything happen before and I dont plan on it. The amp stays cool for the most part. Hasnt got too hot just warm. I have gain set in the middle and use boost at times. Awesome price and great subs and amp.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jack

PA

Overall
Durability
Value
Features
Design
Usability

Suprised they lasted this long.

May 21, 2012

I bought this package about 2 or 3 months ago just to get me started, they sounded great for the first month and as time went on the quality just kept getting worse now its at the point were i don't even turn them on because its just a bad sound. I took them apart and they are cheep subs. The frame is paper thin, I have bigger magnets on my fridge than what are in those things. I don't have any issues with the amp or box.

0 of 0 found this helpful

Help our customers find the most helpful reviews

jkdl

pittsburgh pa

Overall
Durability
Value
Features
Design
Usability

Good for the price.

November 24, 2011

Decent set of 10's for the price well worth it. The downside was the box is way to small for any deep bass so I upped the box size to a sealed 2 cubic foot made it great.

0 of 0 found this helpful

Help our customers find the most helpful reviews

oz

saline michigan

Overall
Durability
Value
Features
Design
Usability

cheap

July 26, 2011

Sounded great was great for price but didn't last long one of the subs blew so there fore i would not recommend you buy unless your just looking for something cheap

0 of 0 found this helpful

Help our customers find the most helpful reviews

jess

California

Overall
Durability
Value
Features
Design
Usability

welp

July 7, 2011

I absolutely love what I got. I drive a 03 Acura RSX and most ppl told me not to get anything bigger then 10" because my windows wouldn't handle and they are kinda right. I got theses installed and my windows completly shake but u have to turn up the bass wit the bass knob and also its very loud if u plug up and iPod due to the iPod having its own volume u can make your music louder. It worth the money for someone just starting out with a system like I was love the product. worth my money. Also with it coming wit all the wiring that you need you save money in installations.

0 of 0 found this helpful

Help our customers find the most helpful reviews

joe

mandfield ma

Overall
Durability
Value
Features
Design
Usability

all about $$$

June 8, 2011

I was expecting more bump but for the price its decent it turns heads.

0 of 0 found this helpful

Help our customers find the most helpful reviews

notabias

paramus, nj

Overall
Durability
Value
Features
Design
Usability

10 visionik subwoofers

March 23, 2011

Honestly a horrible system. Subs had no bump nor quality sound. I thought it was a great deal for the price yet you get what you pay for.

0 of 0 found this helpful

Help our customers find the most helpful reviews

mo

pittsburgh, pa

Overall
Durability
Value
Features
Design
Usability

Visonik sub and amp package

March 10, 2011

I was a little skeptical about this package when I ordered it but was very pleased with it when I installed it. The subs do sound great, and the amp has all the power the system needs. Definately worth looking at. If you want a good sounding system at a great price, this is the one.

0 of 0 found this helpful

Help our customers find the most helpful reviews

8inJeep

New Jersey

Overall
Durability
Value
Features
Design
Usability

Great For Price

February 15, 2011

I had just bought a 1988 Jeep Wrangler and was trying to find a box and subs that would fit in my jeep. I wanted it just load enough that you could hear it outside the car. These are great subs for the price. All my windows rattle and you can clearly hear them. Easy it install too

0 of 0 found this helpful

Help our customers find the most helpful reviews

dev

medford, ma

Overall
Durability
Value
Features
Design
Usability

piece oF junk

January 9, 2011

I have had these for 5months and now they have just stopped working for no reason at all ....do nottt buyyyy!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

cleverusernae.000

Portland, ME

Overall
Durability
Value
Features
Design
Usability

amazing product!

January 8, 2011

I just installed this system a few hours ago, and they ROCK. I was skeptical about them due to the price, but u was wrong, they are great! I 100% recommend this system.

0 of 0 found this helpful

Help our customers find the most helpful reviews

ledges

St. Louis mo

Overall
Durability
Value
Features
Design
Usability

these speakers suck

November 12, 2010

The whole set up was perfect for my truck. They lasted about month. They sounded pretty good at first not to loud but crisp. Then the low freq. base hit and boom they blew I feel like a sucker. I do not recommend this product. They are cheap junk. and the box smells like dirty gym socks.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Serg

Hamptons Roads

Overall
Durability
Value
Features
Design
Usability

Great band for the buck.

November 4, 2010

This is a great setup for someone on a budget or just looking to upgrade their factory system.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Spud

Appleton, WI

Overall
Durability
Value
Features
Design
Usability

Can i get that BOOM

October 14, 2010

Got the subs and they are awesome. They hit like crazy

0 of 0 found this helpful

Help our customers find the most helpful reviews

Michael

PSC 9, AE

Overall
Durability
Value
Features
Design
Usability

great. . . while they lasted (less than 3 months)

October 11, 2010

I would not recommend this system to my worst enemy. . . the sound was clear and excellent for the short time they lasted, wasn't overly loud or at all distorted when set up correctly (10' subwoofers with this 500 watt amp are NOT meant to shake the walls of every building you drive by) the subs were set up unbridged the gain was turned up only to half power, and I hadn't even gotten around to installing my bass control knob. . . after this short period of regular use (as I said i'm not one of those "let's shake my rear view mirror off my windshield" kind of guys, i just like to be able to hear a piece of music in it's entirety) both subwoofers blew, in the one on the left the cone had completely detached itself from the voice coil! =really big expensive dummy load overall, for the short time I had it, it was nice, but I can not excuse the fact that the system could not even make it to 90 days with relatively light use

2 of 4 found this helpful

Help our customers find the most helpful reviews

Audiozonne Fantassia soca band

Brooklyn NY

Overall
Durability
Value
Features
Design
Usability

Great Sound:

September 30, 2010

I have the double speaker product installed in my van not the amplifier. The speaker is great and has a deep and smooth bass tone. I love the sound especially when I play my Earth Wind and Fire Live by Request DVD.

0 of 0 found this helpful

Help our customers find the most helpful reviews

G-Laser

Lancaster, PA

Overall
Durability
Value
Features
Design
Usability

Nice for cheap

September 27, 2010

This unit is surprisingly cheap for the sound quality it puts out. I would not classify it as a true "Bass" but more of a loud speaker system. I have a Benz with a decent system but it never seemed loud enough for me when listening to my favorite CD's or XM. For $150 it was well worth it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tom

Ventura, CA

Overall
Durability
Value
Features
Design
Usability

Excellent products EVER

September 4, 2010

This Visonik BASS system is super loud. I am very impressed with the units performance. Excellent quality, excellent sounds, and I'm extremely happy. Thank you Sonic for such a great deal!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Product Summary

Manufacturer

Model Number

VPB210PK

Weight

27.50lbs

Internal SKU

vpb210pk

Internal Product ID

20241

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Visonik VPB210PK Bass Stimulus Package