Garage
Shop

Soundstream XTA180.2

180 watts, 2-Channel Xstream Series Amplifier XTA 180.2

Product videos
highlight-star-icon

180W RMS 2 channel Xstream Series • 90W x 2 channel power output at 2 Ohm • 45W x 2 channel at 4 Ohm • Bass EQ Control • Drive Delay II • Selectable X-Over HPF / Full / LPF

Learn more about the xta1802

We apologize

This item has been discontinued

Product Highlights


180W RMS 2 channel Xstream Series • 90W x 2 channel power output at 2 Ohm • 45W x 2 channel at 4 Ohm • Bass EQ Control • Drive Delay II • Selectable X-Over HPF / Full / LPF

Description


Soundstream brand icon

Authorized dealer

  • Bass EQ Control: Fully adjustable subwoofer equalization circuit providing frequency and boost ("Q") adjustment for optimum subwoofer performance. A frequency tracking subsonic filter protects woofers from potentially harmful low frequency information and maximizes output in a usable range.
  • Drive Delay II: Amplifier section powers up 2 to 3 seconds after the poewr supply eliminating turn-on and off pops. The turn off process is reversed: Amplifier section turns off first, followed by the power supply.
  • Flexible Input Level Control: Allows 500 mV to 4 V input sensativity.
  • Trident 3-way Protection
  • IDI (Intelligent Distress Indicator)
  • Thermal / Short / Over Load Protection
  • Stability:
    • 2/4 ohms Stereo Mode
    • 4 ohms Mono/Bridged Mode
  • P.W.M Mosfet Power Supply
  • Power and Protection Indicator
  • Selectable X-Over HPF / Full / LPF
  • 18db Bass Boost with Switch Sub (50Hz)
  • Frequency Response: 10Hz - 30kHz
  • Variable High-Pass Crossover (50-500Hz)
  • Variable Low-Pass Crossover (30Hz~500Hz)
  • Gold Plated Terminal Strips / RCA Jacks
  • Heavy Duty Heat Sink
  • Adjustable Input Sensativity
  • Soft Delay Remote Turn-On
  • Low Level Inputs
  • Phantom Channel For Powering Center Speaker or Subwoofer
  • Dimensions: 8.8"L x 12.4"W x 3"H
  • 1-year SonicElectronix.com warranty

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
45 watts x 2 channel
RMS Power @ 2 ohms
90 watts x 2 channel
RMS Power @ 1 ohm
Not Stable
Bridged RMS Power
180 watts
Amplifier Specifications
Number of Channels
2-Channel
Total RMS Power Output
180 watts
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
0.05%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
50 - 500 Hz
Low-Pass Crossover Frequency
30 - 500 Hz
Signal-to-Noise Ratio
96 dB
Bass Boost
0 - 18 dB
Fuse Rating
15A
Warranty and Return Policy

Item Details


Manufacturer:

Model Number:

XTA180.2

Weight:

7.70lbs

Internal SKU:

xta1802

Internal Product ID:

2071

Product and How-to Videos


Customer Ratings & Reviews



5 star
0%
4 star
100%
3 star
0%
2 star
0%
1 star
0%



Durability
4
Value
5
Features
4
Design
4
Usability
5

Customer Reviews

Sort by:

Loading...

pretty good for the price

this amp is pretty good for the price they are selling it at. i have one and it pushes 2 500w subs pretty good. i have no complaints. hopefully it will hold up to the 2 kenwood 1200w subs i just purchased earlier this month...

By christopher on July 13, 2007

6

found this helpful.

Add-ons


Similar Products

Best selling similar products

JL Audio XD200/2v2

• 75 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier

(6)

$199.99

Taramps DS 800x2

• 250 watts x 2 channel @ 4 ohms
• 400 watts x 2 channel @ 2 ohms
• Bridged: 800 watts x 1 channel @ 4 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 2-Channel-Channel Amplifier

$224.00

Hertz HCP2

• 65 Watts RMS x 2 @ 4 ohms
• 100 Watts RMS x 2 @ 2 ohms
• CEA-2006 Compliant
• Refined Heatsink with High Convection Capability
• Automatic Remote Turn-On/Off function
• Dimensions: 8.46" x 7.48" x 1.97"

$199.99

Hertz DPower 4

• 50 watts x 4 channel @ 4 ohms
• 65 watts x 4 channel @ 2 ohms
• Bridged: 130 watts x 2 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class D 2 ohms Stable 4-Channel Amplifier

$279.99

Rockford Fosgate M2-200X2

• 50 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier

$219.99

Related Searches


XTA180.2 small

Item added to your cart.

Price: $79.99

Essential add-ons
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
PAC LP7-2

L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On

$39.00

$24.99

Add to cart
NVX XMICROLOC2

Add a 2-Channel amp without replacing your factory radio

$18.49

$14.99

Add to cart
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$18.74

$14.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

$18.99

$12.99

Add to cart
NVX XWS1625 Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$29.99

$19.99

Add to cart
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$24.99

$12.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon