MAXI Fuse Power Distributor with One 4 Gauge Input and Four 8 Gauge Outputs
Product highlights
• MAXI Fuse Power Distributor
• Nickel-plated terminals
• Impact resistant cover for enhanced durability
• One 4 Gauge input
• Four 8 Gauge outputs
Best selling similar products
HPM Series Power or Ground Distribution Block • One 1/0 Gauge or 4 Gauge Input • Two 4/8 Gauge Outputs • Protective Cover Included • Corrosion Resistant Satin Chrome Finish
(31)
$16.99
List price $39.00
• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(40)
$23.99
List price $49.00
• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$33.99
List price $69.00
• (2) 1/0 ga inputs for power
• (4) 4/8 ga MANL fused power outputs
• >Small Footprint with compact brass design
• All in one compact block
(1)
$45.00
List price $45.00
• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included
(21)
$14.99
List price $29.00
• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
(9)
$28.99
List price $49.00
• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations
$49.00
List price $69.00
• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base
$69.99
List price $69.99
• Independently MANL fused outputs
• (1) 1/0 AWG - 8 AWG In
• (3) 4 AWG - 10 AWG Out
• Nickel finish for durability
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
(3)
$56.99
List price $63.99
• MANL 4 Position Distribution Block
• Small Footprint
• 1) 1/0 AWG Input
• (4) 4/8 AWG outputs
(3)
$36.00
List price $36.00
Manufacturer:
Model Number:
CBLOCKM4
Weight:
1.50lbs
Internal SKU:
cblockm4
Internal Product ID:
21114
| 5 star |
|
67% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
33% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Did the job
I used this for a fuse block under the hood of a 280Z to replace the fuse-able links.
7 found this helpful
Keep looking
I would not recommend this distribution block. There is too much opening in the case . On the input side (which there are THREE not one holes) the wire hole is in the middle and there is a good 1" of exposed plate on both sides. The top is not enclosed. There is a plastic tape/sheath covering the holes. The bottom has the securing screws exposed and simply covered with scotch tape. This block is a electrical short to ground, fire, or shocking hazard waiting to happen
Avoid.
5 found this helpful
Good Quality Product
Purchased product on E-bay, and received it very quickly. Overall appearance of product was good. The connection clamps looked secure. However the project I had purchased it for had to be moved to lower priority, but look forward to using it at a later date or on another project.
4 found this helpful
180W Max (90W RMS) 6.5" Dual Cone Coaxial Marine Speakers (White)
(1)
$45.99
List price $45.99
2 Pieces 12" x 12" Accumat Sound Dampening Material
(2)
$9.95
List price $29.95
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
