Expert Service 1-877-289-7664 [Hours]

Orion XTRPRO124

12" Dual 4 ohm XTR PRO Series Car Subwoofer

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

  • 12" XTR PRO Dual 4 ohm Subwoofer
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 500 watts
  • Polypropylene dust cap and paper cone is moisture and UV resistant
  • Nitrile-butadiene rubber surround enhances the linear excursion
  • Symmetrical tuned long-throw surround
  • Dual interlaced conex spider
  • Custom cast aluminum frame
  • Custom trim ring
  • Tinsel leads stitched and looped across spider
  • Tri-cooling system
  • Copper wound voice coil on aluminum former
  • Venting in voice coil former is part of the enhanced voice coil cooling system
  • Advanced forced convection cooling system
  • Sensitivity: 82 dB
  • Two large 48 oz. double stacked ceramic magnets (96 oz. total)
  • 1-year Sonic Electronix warranty

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
XTR Pro (Orion)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1000 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
500 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
32 - 500 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
84 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
17.25 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Reinforced Paper
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Nitrile Butadiene Rubber (NBR)
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6.46"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
10.91"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
69%
4 Star
31%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.5
Value
4.8
Features
4.8
Design
4.8
Usability
4.7
Purnell L

H-town MD

Overall
Durability
Value
Features
Design
Usability
WOW

July 27, 2013

About a month ago I decided to upgrade my factory stereo system in my 08 Accord. I decided to use my Orion Xtreme bandpass box "12 Orion sub inside that I've had for at least 15 years! I have the original Orion 260 watt amp that I purchased with the sub/box. Well just a week ago the original sub stopped working. I was heartbroken...I mean I abused this sub from my late teens to my 30's! We had some great times together! it finally died on me one day cranking it in 100+ degree heat. So I got on Sonic Electronix and looked for another Orion sub. Came across the Orion XTR 124. I did a ton of research and couldnt believe when this sub came out a couple years ago it was around $400 bucks! I received it yesterday and just hooked it up in my original Orion box the old sub was in. And man does it THUMP!!! This sub hits much lower than the old one. Its cleaner... DEEPER.. and I'm only pushing it with a 260 watt "bridged" 15 year old Orion amp! I'm looking forward to jammin with this sub for another "at least" 15 years!!! Orion's products are really durable. reliable and sound Xtremely superb! I am a devoted customer of their products...own something of theirs and you will understand why. Thank you Sonic for your great products at a great price and thank you Orion for making outstanding audio gear!!!

1 of 1 found this helpful

Help our customers find the most helpful reviews

Austin

Pine Haven, WY

Overall
Durability
Value
Features
Design
Usability
One word: LOUD

October 20, 2012

I've had this sub for a few months, put it in a custom ported enclourse I built myself, and after I felt it was suffciently broken in I gave it full power, and holy crap was it loud. For one 12" sub this thing is crazy, it shakes the crap out of everything in my car. Also I completely disagree with anyone who says not to go much over rated RMS. This sub is power hungry. I am currently giving it 750 watts (of clean power mind you) all day everyday and I haven't experienced a single problem.

1 of 1 found this helpful

Help our customers find the most helpful reviews

NCC1701

Pleasanton, CA

Overall
Durability
Value
Features
Design
Usability
Great sound

June 11, 2012

The look and sound quality on this speaker is pretty good. When compared to other 12" subwoofers, this one sounds much louder and better, more solid but it also cost more too. I have this install in a duel 12" vented box powered by an Orion XTR 500 WATT amp, sound level reaches 100 decibel without distortion. At that level, it shakes the house when parked in the garage. You need ear plugs when sitting inside the car, it's LOUD and you feel it! For normal listening, one speaker is more than enough. No regrets though, I would buy it again.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Crazy Lou

Chicago,il

Overall
Durability
Value
Features
Design
Usability
Basss is Crazy

March 25, 2012

This sub is good. Try not to go over 600rms the glue stinks bad but I am overall satisfied. I have 2 of them with a memphis 1200 each sub has about 1.75 cubes of space. Perfect match.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nate Dogg

Swagg Town, Tx

Overall
Durability
Value
Features
Design
Usability
xtr pros bang

February 11, 2012

I recently hooked up 2 orion xtr pro 12's in my little honda prelude running off a power acoustik 4000 watt class d amp and it is crazy loud. The amp is over rated and only puts out 1200 to 1400 watts rms and the xtr pro's are under rated at 500 watts rms so this is a match made in heaven for a budget system. My xtr pro's are handling the 600 to 700 watts with ease and with above average sound quality while doing so. After 2 months of sub'n there still getting louder every time I turn em' up. I can't wait till I get some electrical upgrades so I can see what they can really do. If your in need of some top of the line subs on a limited budget the orion xtr pro's are for you!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

TRIP559

THE NO TWN, CA

Overall
Durability
Value
Features
Design
Usability
XTR-PRO-124 IT GETZ LOWWWW

January 2, 2012

I have 2 12's in a ported box tuned to 35Hz. Got em running off an mb quart onx1500.1d its like a made match. The orions get soooo loooowwww its just bonkers ;). Very pleased overall with my setup. My whole car is full of rattles. My next project is to lay some dynamat everywhere. These subs hit so hard, and when i check on em, there is barely any excursion. So im think of throwing a lil more power at them and seeing how it goes. Overall a great sub. You can't go wrong with it if you are a bass head lol. Thanx SonicElectronix for all your help in the great prices!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Midnightz

Chicago il

Overall
Durability
Value
Features
Design
Usability
Orion xtrpro12 350z

December 2, 2011

I had an alpine type r 12 in my 350z and it sounded good. A friend recommended this sub so decided to try it out. I have a custom ported box and it sounds way better. Alpine type-r has higher watt rating. The the Orion is 50% louder. I still have to check durability, and see how long it take the hifonics Brutus 1600.

0 of 0 found this helpful

Help our customers find the most helpful reviews

zack

manning, SC

Overall
Durability
Value
Features
Design
Usability
Awesome Sub!!

August 17, 2011

I only have one of these in a Super Bass Probox in my GMC Sierra and it pounds!! I actually can feel my insides rattle around as it hits. I had 2 pioneer impp and they do not touch this sub. One of these is as loud or maybe just a hair louder than my friends (2) Kicker L5s but this hits a lot harder than the L5s. Great Sub! Gonna order another come payday!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Bass man

Waukegan, IL

Overall
Durability
Value
Features
Design
Usability
Really good subs

June 3, 2011

I have two on a Hifonics 2000W RMS at 1 ohms. In a Obcon transmission line box forward facing with foam around so no bass goes into the trunk. They hit really hard maybe to hard I have had panels come loose and forget trying to use your mirrors. Can you be herd, yes big time my friend was in his car at the stop light two cars ahead of me and he said he could feel it in his car. I have not had them very long so I can't judge durability. If you want a good sub that will get you tickets and piss off people this is the sub for you. Just install them properly. If you want the best subs you can get, go for fi audio q fully loaded. They cost around $350 apiece. That's what I ordered but they are made to order so they take about a month. Believe me money well spent can't wait to get them :-)

0 of 0 found this helpful

Help our customers find the most helpful reviews

Troy Winkler

Wisconsin Rapids, WI

Overall
Durability
Value
Features
Design
Usability
Quality Product

March 25, 2010

I run 2 12" Pros off of an Alpine PDX1000 watt amp and these subs hit pretty hard. Stitched surround? Who does that kind of quality anymore?! These hit 143 db in a large car. Not bad.

0 of 0 found this helpful

Help our customers find the most helpful reviews

berto

racine,wi

Overall
Durability
Value
Features
Design
Usability
orion xtr pro 124

March 19, 2010

i love these subs handle allot more than the rated 500 watts rms each. i had 2 hooked up to a powerbass 3000.1 with a ported box tuned at 36 hz and it banged hard as s***. i had my amp pretty much maxed out and these things handled it with ease. i like these better than my kicker L7s I recommend these subs to anyone.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Joey

Orlando, FL

Overall
Durability
Value
Features
Design
Usability
Sick sub

December 21, 2009

this sub is sick it has so much xmax and just looks cool jumping. this one sub is just as loud if not louder than my two kicker comps. price is a little bold but thing is strong. i would recommend this sub to any one great job Orion!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

rick

harlingen texas

Overall
Durability
Value
Features
Design
Usability
orion xtrpro124

May 26, 2010

This woofers hit hard and I bought them at a great price!

0 of 2 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Single 12" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil.

Your Price $34.99

12" Dual Sealed Subwoofer Enclosure

CARB Compliant, 3/4" MDF Dual Vented Enclosure w/ Premium Carpeted Finish

Your Price $89.95

12" Vented Subwoofer Enclosure

CARB Compliant, 3/4" MDF Vented Enclosure Lined with Premium Carpeted Finish

Your Price $65.95

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $59.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $109.95

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $69.99

20 oz. Bag of Poly-Fil

Polyester fiber fiberfill adds better bass to your system.

Your Price $5.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

12" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 Orion XTRPRO124 Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 Orion XTRPRO124 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 Orion XTRPRO124 Subwoofers

Mono Amp

4 Channel Amp

4 Orion XTRPRO124 Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

XTRPRO124

UPC

093207061424

Weight

24.00lbs

Internal SKU

xtrpro124

Internal Product ID

21158

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Orion XTRPRO124