Expert Service 1-661-257-9993 [Hours]

Technical Pro WM-200

Wireless Microphone System with Two Microphones

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

  • Professional Wireless Microphone System
  • Dual signal VHF High band
  • Two microphones are included
  • Frequency range: 109-120MHz
  • Maximum deviation range: +/- 75kHz
  • Frequency response: 100-10,000Hz
  • Signal-to-noise ratio: >80dB
  • Modulation mode: FM
  • THD: <1%
  • Audio dynamic range: >80dB
  • Service area: >50 ft.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Microphone Specifications

Microphone Type
This is the type of microphone included with the purchase of the item.

Wireless:All of these microphones can be used without the necessity of wires or cables to connect them. They usually come with a receiver that connects to the input device where the audio signal is being sent.

Shotgun: These microphones are suspended on a boom and are used primarily in video production and broadcasting.

Lavaliere: These microphones are clipped on to the lapel or tie of the talent for broadcast and video production audio.

Table Top: These microphones are designed with a built in stand or to be placed on a table top stand to be used for broadcasting and podcasting applications.

Headset: These microphones are to be worn on the head typically for live performance and theater production.

Handheld: These microphones are held in the hand and are used in a wide range of applications primarily vocals and public address.

Clamp On: These microphones attach directly on to an instrument.

Drum Package: These microphones are an all in one package for drums typically made of dynamic Kick, Snare, Tom, and a stereo condenser pair of overhead mics for Cymbals.

Wireless
Designed Applications
The intended application the microphone is designed for.
Number of Microphones
This is the number of microphones that are included in the package.
2
Address
The configuration of the capsule determining on which side the microphone is sung or spoken into.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
100 - 10,000 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
80 dB
Pad(s)
A pad is a term used for built in attenuation in a microphone or pro audio channel strip.
Roll Off Filter
A low frequency filter found on microphones commonly expressed with a threshold in Hz and a slope in -dB/Octave.
Power Requirement
Condenser microphones require an external power source to operate. Typically a +48v DC charge commonly refereed to as Phantom Power.
Length
The overall length of the microphone.
Diameter (inches)
A straight line running from one side of a circle or other rounded geometric figure through the center to the other side, or the length of this line

Wireless Specifications

Carrier Frequency Range
The frequencies of radio waves used by wireless communication transmitters and receivers. VHF 30 to 300 MHz, wave length 1 to 10 m UHF 300 to 3000 MHz, wave length 10 to 100 cm
Operating Range
The maximum span of distance between The Transmitter and Receiver.
Number of Channels
The number of different frequency Channels that a wireless microphone system is capable of using.
Transmitter Type
The type of transmitter in a wireless microphone system.
Receiver Type
The type of receiver used in a wireless microphone system.
Diversity
True Diversity receivers have two radio modules and two antennas. Diversity receivers have one radio module and two antennas, although some times the second antenna may not be obviously visible. Non-diversity receivers have only one antenna.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
100%

Average Attribution Rating

Durability
3.0
Value
1.0
Features
3.0
Design
3.0
Usability
1.0
Ron

FL

Overall
Durability
Value
Features
Design
Usability
Very poor

June 26, 2011

The quality is low and the construction is cheap, but that's not so bad considering the price.

The problem is the noise is awful and there are interference problems which generate so much static and hum as to make it too noisy to use.

Maybe if someone could have an electronically isolated power source and a room shielded from all EM interference, it might be usable. But for the real world, it's just a waste of money.

2 of 3 found this helpful

Was this review helpful to you?

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

WM-200

UPC

859789003685

Weight

3.00lbs

Internal SKU

tp-wm200

Internal Product ID

21287

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Technical Pro WM-200