Expert Service 1-877-289-7664 [Hours]

Kicker KM6500.2 (10KM6500.2)

6.5" Marine KM Series HLCD Tower Component System

In Stock. Only 1 Left!
|

List price $549.95

$219.99

with warranty

You Save: $329.96 (60.00%)

Arrives by Monday, July 28 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Mon, July 28

General Features:
  • 6-1/2" KM Series HLCD Tower Component System
  • Power Handling:
    • Peak: 400 watts per pair / 200 watts each
    • RMS: 200 watts per pair / 100 watts each
  • Injection molded woofer cones
  • SantopreneŽ woofer surround
  • 2" Tractix horn loaded compression tweeter drivers
  • Titanium diaphragms and phase plugs
  • 60°-vertical by 90°-horizontal horn dimension
  • Fits standard 6-1/2" tower cans for easy install
  • 316L rust proof stainless steel construction
  • UV treated for protection against saltwater environments
  • Integrated crossover separates frequencies
  • Sealed midrange motors and cones
  • Add another Kicker 10KM6500 midrange speaker for extreme output
  • Cast aluminum basket with heat sink properties
  • Lightweight dual neodymium magnet technology
  • Water-resistant, bolt-thru grilles for speaker protection
  • 4 ohms impedance
  • Top-mount depth: 3-7/8"
  • Item is a part of Kicker ProFit Group
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Specifications:
  • High pass frequency: 1,700Hz, 18dB/octave
  • Low pass frequency: 1,700Hz, 12dB/octave
  • High frequency output level: 0 or +6 dB
  • ASTM B117 200 hr. Salt Fog Test
  • ASTM G154 400 hr. Accelerated UV Test
  • Woofer Mounting Hole Diameter: 5-11/16"
  • Woofer Mounting Depth: 3-7/8"
  • Horn-loaded Compression Driver Mounting Hole Diameter: 5-11/16"
  • Horn-loaded Compression Driver Mounting Depth: 7-3/16"

Priced Per Pair

2011 Kicker Authorized Online Dealer and eBay Seller

Tower Speakers Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Number of Speakers
This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

Please refer to the product image and description for further details about the speaker.

4
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Horn
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Titanium
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
400 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
200 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
94.5 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
50 - 22,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Tower Mounting Brackets
This will indicate whether the item is compatible with mounting brackets and whether they are included in the initial purchase. Mounting brackets are typically used in attaching the speaker to a tower, however some mounting brackets allow the speaker to be attached to the deck of the boat.
No
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
On Sale
Closeouts

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.7
Value
5.0
Features
5.0
Design
5.0
Usability
5.0

Wake tex

Lufkin Texas

Overall
Durability
Value
Features
Design
Usability

Kicker km6500.2

June 2, 2014

The km6500.2 are a great product. Super loud at a great price. I add them to my wakeboard tower and couldn't be happier. And thanks Sonic Electronix for an awesome price and fast shipping.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Kevin

Plano tx

Overall
Durability
Value
Features
Design
Usability

Excellent sound

September 10, 2012

I bought these for my girls to listen to while they wakeboard. I could not be more pleased. These throw the sound just like Kicker advertised. Great product for the Money.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Filipp

Torrance,, CA

Overall
Durability
Value
Features
Design
Usability

Kicker KM6500

June 1, 2012

The speakers work well on the tower of my boat. I got a good clean and powerful sound. High-frequency dynamics, perfectly risen in the case of Ariel. For mid-bass, the volume of housing should be increased.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Product Summary

Manufacturer

Model Number

10KM6500.2

UPC

713034050766

Weight

13.00lbs

Internal SKU

10km65002

Internal Product ID

21913

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker KM6500.2 (10KM6500.2)