Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Kicker TCVT102 (10TCVT102)

Compact Single 10" 2 ohm Comp VT Loaded Subwoofer Box/Enclosure Great for Trucks

Discontinued
|

We apologize

This item has been discontinued

Bundled Savings with this Product

=

25% off an NVX Sound Damping Trunk Kit with Purchase!

With purchase of any NVX subwoofer, you can save 25% on an NVX trunk kit that contains 20 sq. ft. of quality sound dampening material. This material quiets vibrations, stops rattles, and increases the subwoofer SPL.

15.00

21940

4

Kicker TCVT102 (10TCVT102)

$139.95

+

25% OFF

NVX SDTK20

$59.99

Special Price $44.99 ($59.99 if purchased separately)

NVX SDTK20

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

(Offer 1 of 1)

Combined Total Price

$184.94

You Save $15.00

Subwoofer Specification:
  • 10" CompVT (CVT) Subwoofer
  • Shallow mount subwoofer allows for deep bass with minimum mounting depth
  • Power Handling:
    • Peak: 800 watts
    • RMS: 400 watts
  • Enclosure impedance: 2 ohms (Wired internally in parallel to final 2 ohm impedance)
  • Injection molded SoloKon cone
  • Ribbed Santoprene surround
  • Stitched surround for enhanced cone-to-surround strength
  • Extra strong adhesive and stitching prevents the cone from detaching from the surround
  • Spiralead tinsel lead technology weaves the tinsel leads into the spider
  • Super rigid cone and 360-degree back bracing eliminate distortion
  • Sturdy steel basket holds the subwoofer mounted firmly
  • Steel basket features perimeter venting around the single voice coil
  • Strong spring-loaded terminals
  • Newly re-designed 2010 basket structure
  • Includes a built-in steel clearance adapter plate, which replaces part of the enclosure wall to allow shallower installations
  • Shallow mount subwoofer allows for deep bass with minimum mounting depth
  • Ventless pole piece for extreme power handling
  • Shallow four-layer voice coil
  • High-Temperature single 2 ohm voice coil
  • Powerful rear magnet
  • Frequency response: 25-350 Hz
  • Mounting depth: 4-1/4"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Enclosure Specifications:
  • Single 10" Sealed Truck Enclosure
  • Smallest sub-loaded enclosures from KICKER
  • Easy-to-use impedance designated at the terminal cup assembly
  • Tough KICKER wood enclosure
  • Dense gray carpeting
  • Monogrammed, carbon-fiber front baffle
  • Dimensions: 3-7/8"TD x 6-5/16"BD x 11-3/8"H x 19-11/16"W
2011 Kicker Authorized Online Dealer and eBay Seller

Product History:

Kicker 10TCVT102 thumbnail
(newest, current model)
Kicker 07TCVT104 thumbnail
(previous model, replaced by Kicker TCVT102 (10TCVT102))

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
800 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
SoloKön
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
25 - 350 Hz

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Sealed
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
1
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Truck Style, Slim with Angled Front
Height
The height of the item, measured from top to bottom, in inches.
11-3/8"
Width
The width of the item from left to right (side-to-side) measured in inches.
19-11/16"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
3-7/8"
Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
6-5/16"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
3/4"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
1
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Spring posts
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
75%
4 Star
25%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0

Garrett

San Diego, California

Overall
Durability
Value
Features
Design
Usability

Wonderful Product

September 4, 2013

I purchased this product for a standard cab 2004 Ford Ranger. It is a "shoehorn" perfect fit for my truck. I can have my seat all the way back and still have clear, full bass at high volume for my drive to and from work! I am very happy with the quality and craftsmanship of the product, despite not being a huge fan of "Made In China" goods. Overall, this product delivers solid, clean, and tight bass and is very well crafted. The enclosure has an attractive appearance and the price point is more than fair. By the way, after MUCH research, this is the best enclosure for my generation Ford Ranger (Standard Cab) if you want high quality product and great performance, while actually being able to have the seat all the way back, as most owners of this truck need to do.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tucker

Saluda, NC

Overall
Durability
Value
Features
Design
Usability

Awesome

March 12, 2012

I put 2 10's in my F150 and they thump great. All my friends are jealous.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Lee Hanberg

Utah

Overall
Durability
Value
Features
Design
Usability

Kicker awesome

January 18, 2012

I bought one of these for my 82 gmc i didnt have a lot of room behind the seat and ive had a lot of kicker subwoofers and they have always been great and this one did not do anything less. It sounds awesome tons of bass definitely the way to go if you dont have much room.

0 of 0 found this helpful

Help our customers find the most helpful reviews

J.J.

Elko Nv.

Overall
Durability
Value
Features
Design
Usability

awesome product

February 24, 2011

I would recommend this speaker box to everyone. I was very impressed that you can get that amount of bass out of a 10".

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $59.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $12.99

Product Summary

Manufacturer

Model Number

10TCVT102

UPC

713034050667

Weight

22.00lbs

Internal SKU

10tcvt102

Internal Product ID

21940

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker TCVT102 (10TCVT102)