Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale- more products added!

Kicker ZX750.1 (10ZX750.1)

750W RMS, Class D Monoblock ZX Series Amplifier (ZX7501)

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

11zx7501 thumbnail

Kicker ZX750.1 (11ZX750.1)

OUR PRICE: $284.95

View item

Get FAST answers from customers ASK a Question See questions answers

  • ZX Series Class D Monoblock Car Amplifier
  • RMS Power Rating (14.4V):
    • 4 ohms: 375 watts x 1 chan.
    • 2 ohms: 750 watts x 1 chan.
  • High efficiency MOSFET power supply
  • LED power and protection indicators
  • Remote bass level included
  • Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
  • Preamp RCA outputs
  • Muting circuit cancels out unwanted noise
  • Boost, gain, and crossover frequencies are top-mounted for easy access
  • Balanced differential inputs for noise elimination and factory-radio compatibility
  • 3 Automatic turn-on modes (remote, DC offset, signal sense)
  • Optional edgy vinyl skins for personalizing heat sinks available
  • Optional Kicker 08ZXEC endcaps are available for all ZX amplifier models
  • High-density convection heat sink for extreme heat dissipation
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable low-pass filter (50-200 Hz, 24 dB/octave)
  • High-pass subsonic filter (24 dB at 25 Hz)
  • CEA-2006 compliant amplifier
  • Frequency response: 25-200 Hz
  • Dimensions: 14-11/16"L x 9-5/8"W x 2-1/8"H
  • Actual power exceeds rated power, documented inside each carton
  • 4-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
  • Authorized Internet Dealer
  • 2-year Manufacturer's warranty

Extend your Kicker warranty to 3 Years when you install your new Kicker amplifier with a compatible Kicker power kit! For a limited time, you can register your Kicker amplifier and power kit to qualify for an additional year of coverage. This offer is only available through official Kicker dealers and will only last for a limited time. With this amplifier, the following power kits will qualify for the extended warranty program: Kicker 09PK4, Kicker CK44, Kicker 09ZCK44. and Kicker 09PKD1.

Product History:

Kicker 11ZX750.1 thumbnail
(newest, current model)
Kicker 10ZX750.1 thumbnail
(previous model, replaced by Kicker ZX750.1 (11ZX750.1))
Kicker 08ZX750.1 thumbnail
(previous model, replaced by Kicker ZX750.1 (10ZX750.1))
Kicker ZX750.1 thumbnail
(previous model, replaced by Kicker 08ZX750.1)
Kicker KX600.1 thumbnail
(previous model, replaced by Kicker ZX750.1)

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

375 watts x 1 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

750 watts x 1 channels
RMS Power @ 1 ohm

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 1 ohm, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

Not Stable
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

Not Bridgeable

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage. Often times this maximum is achieved during a brief musical burst, such as a drum accent or low bass hit. Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. This is the peak power output for the amplifier's 5th channel.

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

750 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 200 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
25 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
95 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
40A x 2 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
2 years
Labor Warranty Duration
2 years
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0

Thomas

Pasadena, MD

Overall
Durability
Value
Features
Design
Usability

great amp

October 8, 2010

i have this hooked up to my L5 15' 750 rms subwoofer,in a 89 crown vic station wagon and it broke out one of my rear windows,enough said

6 of 6 found this helpful

Help our customers find the most helpful reviews

christopher

Eastpoint, FL

Overall
Durability
Value
Features
Design
Usability

awesome amp

March 25, 2010

wow this amp is powerful even though its only a 750 it has more power than most i had 2 15's hooked to a 2500 watt amp and then decided to try a kicker amp. Even though i only got the 750 it hit much harder with the 750 than it did with the 2500. i would highly recommend any kicker amp or sub.

4 of 4 found this helpful

Help our customers find the most helpful reviews

j

naples fl

Overall
Durability
Value
Features
Design
Usability

great amp!!!!

November 17, 2010

Installed for a friend in a 2005 Silverado he has 2 12" Kicker CVR's under the rear seat with stock radio and man I wish I had one of these monster it said 977 watts rms and that truck pounds beautiful..buy it

2 of 2 found this helpful

Help our customers find the most helpful reviews

Juice

Huntsville Alabama

Overall
Durability
Value
Features
Design
Usability

Amazing!!!!!!!!!!!!

November 15, 2010

Got this amp hooked up a few days ago on my L7 12 and it pounds I love it thanks Sonic Electronix...

2 of 2 found this helpful

Help our customers find the most helpful reviews

Mike

New Hartford, CT

Overall
Durability
Value
Features
Design
Usability

Powerful amp

November 9, 2010

I have this amp in my truck, and I love it! It says its only 750 watts, but my birth sheet said 946 watts RMS! I have it powering a kicker l5 15" and its a perfect match, sounds great and kicks like you wouldn't believe! I can't even use my back mirror because its too blurry!

2 of 2 found this helpful

Help our customers find the most helpful reviews

Andrew

Saint Paul, MN

Overall
Durability
Value
Features
Design
Usability

dam good amp

November 17, 2012

i would recomend this amp to anyoneit is a nice amp i live in mn cold does not affect this amp solid alll around i have blown a couple kicker comps and it def does the job just baught a l3 for this amp and i am hoping it will be alot better

0 of 0 found this helpful

Help our customers find the most helpful reviews

Rob

Remington, IN

Overall
Durability
Value
Features
Design
Usability

Gets the job done.

February 15, 2012

I have this amp running two 12" type rs in a sealed box and it makes em bang pretty hard even though these subs need quite a bit more power. Still makes you deaf a lil bit tho I ain't gonna lie. I'd like to pick up another and see what happens. So far since I've owned it, its never gotten hot or shut off or anything abnormal. It don't even make my lights dim and I have no cap on it yet. I'm very satisfied with it, I couldnt ask for more. I just need another one and possibly a slot ported box. Don't waste your time with junk people! I've been in this game awhile now and learned my lessons. Please do yourself a favor and get the BOSS or NITRO amp out of your cart and save your loot if you have to. CEA compliant electronics are the real deal don't settle for less! They are always underrated and they don't jack up the numbers to think your getting a deal like some 2nd rate sounds do. To all you bass junkies out there, keep doin your thing.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Rod

Bladensburg, MD

Overall
Durability
Value
Features
Design
Usability

AWESOME AMP!!!

May 30, 2011

Been kickin (2)12inch Kicker CVR's (which are 1600watt peak) for about 6 months now and not once has overheated or gave me any kinda problems. Delivered good clean bass with all music with no need for capacitors. I have yet to turn the bass of the amp off of ZERO and it still vibrates your chest! Love it and sonic has it for a GREAT value!!!THANX ALOT SONIC!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Royalnut

Albuquerqe, NM

Overall
Durability
Value
Features
Design
Usability

Oh damn...

May 27, 2011

I got this amp and a single 12" Kicker L7 and that combo pounds like no other. I have friends ask "how many subs do you have??" Lol There is no question that this amp is worth it. Has never overheated or stopped working. I've had this system for 1 year now and still running prefect. Kicker gives you a long warranty because they know you won't need it :D this amp should cost $100's more. Obviously you should run a 2 ohm setup with this amp. DVC L7 4 ohm wired down to 2 ohm. The adjustment dials are easy to access. Easy to set gain, bass boost, and cutoff (nothing over 50hz matters tho ;) A sub is only as good as the power it gets. Even the 4awg Kicker power wire I used is beast. The wire is twice as thick as Singer wire!! I digress... BUY THIS AMP! Take out a loan, pawn some things, whatever it takes. This will make you cry, and go deaf. Don't buy a halfass sub either...

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jared

Ellwood City, PA

Overall
Durability
Value
Features
Design
Usability

Kicker 750

May 18, 2011

Great amp

0 of 0 found this helpful

Help our customers find the most helpful reviews

Bulletbeasy128

Bull Vill

Overall
Durability
Value
Features
Design
Usability

Beast

March 30, 2011

Great Product

0 of 0 found this helpful

Help our customers find the most helpful reviews

JVett

Tulare, CA

Overall
Durability
Value
Features
Design
Usability

BEAST

February 24, 2011

This amp is complete perfection inside and out! I looked at every mono amp on this website until I was 100% sure about my decision. For the price you pay, I dont think you can get any better. This amp has mucho power. My 2 12in RE Audio SRX subs are destroying my poor Camry, but I love it :) Kicker did an awesome job designing this amp. It is extremely sturdy and stylish. Buy this amp and you won't be disappointed.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nick

Ontario, CA

Overall
Durability
Value
Features
Design
Usability

One of the best amps for the price

December 17, 2010

i think this amp is the best amp you can own for the price of 250, it has alot of power, and it looks great, i have it powering 2 JL Audio W6 and its sounds real clean and loud, would recommend this to anyone who is looking for a great amp

0 of 0 found this helpful

Help our customers find the most helpful reviews

EJ

Rock Hill, SC

Overall
Durability
Value
Features
Design
Usability

Awesome Power

December 14, 2010

This product is FANTASTIC. It powers my 12" DVC 4ohm (wired to 2 ohm) fantastically! Sounds amazing and would recommend Kicker amplifiers to anyone with no doubt. The 2 year warranty isn't bad either!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $89.99

Kicker CK4 4 Gauge Amplifier Kit

Get a Kicker wiring kit to match your new Kicker amplifier!

Your Price $129.95

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

Your Price $29.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $79.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $149.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

StreetWires FB4

4 AWG / 4 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Professional Installation for your Car Power Amplifier

Covers labor charges through our professional installer network.

Your Price $89.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

NVX XIX25 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $26.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

AutoSound 2000 CD-102

High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.

Your Price $11.99

AutoSound 2000 CD-104

Audiophile reference series test disc for evaluation of all audio components.

Your Price $11.99

XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

Your Price $12.99

Product Summary

Manufacturer

Model Number

10ZX750.1

UPC

713034050926

Weight

13.00lbs

Internal SKU

10zx7501

Internal Product ID

21956

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker ZX750.1 (10ZX750.1)