Garage
Shop

Hifonics Brutus BRZ2100.1D

2100W RMS Brutus Series 1-Channel Monoblock Super Class D Amplifier (BRZ 2100.1D)

Hifonics
Shop all Hifonics
Product videos
highlight-star-icon

Brutus Series Monoblock Class D Car Amplifier • 2100W x 1-Chan. @ 1 Ohm • 1400W x 1-Chan. @ 2 Ohm • 700W x 1-Chan. @ 4 Ohm • Wired HFR-3 Remote • 4-Way System Protection • Phase Shift • Silver-Plated RCA Inputs

Learn more about the brz21001d

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

brx20161d thumbnail

Hifonics Brutus BRX2016.1D Monoblock Amplifier

OUR PRICE: $229.95

View item

Product Highlights


Brutus Series Monoblock Class D Car Amplifier • 2100W x 1-Chan. @ 1 Ohm • 1400W x 1-Chan. @ 2 Ohm • 700W x 1-Chan. @ 4 Ohm • Wired HFR-3 Remote • 4-Way System Protection • Phase Shift • Silver-Plated RCA Inputs

Description


Hifonics brand icon

Authorized dealer

Performance meets Value

The new 2010 Hifonics Brutus amplifiers are much more than a good-looking amplifier. Underneath the solid aluminum casing, you will find quality amplifier components that are sure to satisfy any compatible subwoofer. The new BRZ amplifiers have changed the heat sinks on each side to vertical aluminum fins. Since heat rises, these fins draw the heat up and allow it so effectively dissipate from the amplifier. The vertical aluminum heat sinks are located on two sides of the amplifier and effectively maintain the temperature of the amplifier to prevent any overheating. Combined with the other power/protection indicators and the 4-way system protection circuitry, the Hifonics Brutus amplifiers prove to be a safe, efficient, and reliable amplifier for your subwoofer.

Every Brutus amplifier is CEA-2006 certified. That means you can be confident in knowing that you are paying for real power. The wattage that the amplifier is rated at is the wattage that it will consistently produce and supply your subwoofer with. This is typically a feature just found on the higher-end, expensive amplifiers, however all the Brutus series amps are CEA-2006 compliant with a low price tag. By choosing one of these amplifiers, you will be high-grade performance and still have money left over. Performance meets value with the Hifonics Brutus amplifiers!

  • Brutus Series Monoblock Class D Car Amplifier
  • RMS Power Rating (@ 14.4V):
    • 4 ohms: 700 watts x 1 chan.
    • 2 ohms: 1400 watts x 1 chan.
    • 1 ohm: 2100 watts x 1 chan.
  • MOSFET power supply
  • Wired HFR-3 remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +10 dB bass boost at 45 Hz)
  • Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-Way System Protection circuitry (thermal, overload, speaker short and DC protect)
  • Heavy duty aluminum alloy finned heatsink for maximum heat dissipation
  • Silver-plated unbalanced RCA level inputs
  • Silver-plated molded screw terminals
  • Input sensitivity:
    • Input Level (Unbalanced): 0.2V-9V
    • Input Level (Balanced): 0.04V-18V
  • Variable low-pass filter (35-250 Hz, 24 dB/octave)
  • Subsonic filter (15-35 Hz, 24 dB/octave)
  • Phase Shift: 0-180°
  • Damping factor: >290
  • Frequency response: 35-250 Hz
  • CEA-2006 compliant amplifier
  • Dimensions: 19-2/3"L x 9-1/4"W x 2-7/16"H
  • 0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Read more about the Hifonics Brutus BRZ2100.1D in our blog!

Product history:

Hifonics BRX2016.1D thumbnail
(newest, current model)
Hifonics BRX2000.1D thumbnail
(previous model, replaced by Hifonics Brutus BRX2016.1D Monoblock Amplifier)
Hifonics BRZ2100.1D thumbnail
(previous model, replaced by Hifonics Brutus BRX2000.1D (FREE Upgrade to BRX2016.1D))
Hifonics BXi2010D thumbnail
(previous model, replaced by Hifonics Brutus BRZ2100.1D)
Hifonics BXi2008D thumbnail
(previous model, replaced by Hifonics BXi 2010D)
Hifonics BXi2006D thumbnail
(previous model, replaced by Hifonics BXi 2008D)
Hifonics BX2005D thumbnail
(previous model, replaced by Hifonics BXi 2006D)

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
700 watts x 1 channel
RMS Power @ 2 ohms
1400 watts x 1 channel
RMS Power @ 1 ohm
2100 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
2100 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
<0.1%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
35 - 250 Hz
Subsonic Filter
15 - 35 Hz
Signal-to-Noise Ratio
>95 dB
Bass Boost
0 - 10 dB
Remote bass/level controller
Yes
Fuse Rating
200A x 1 
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

BRZ2100.1D

Weight:

20.00lbs

Internal SKU:

brz21001d

Internal Product ID:

23549

Product and How-to Videos


Customer Ratings & Reviews



5 star
81%
4 star
17%
3 star
2%
2 star
0%
1 star
0%



Durability
4.7
Value
4.8
Features
4.7
Design
4.8
Usability
4.8

Customer Reviews

Sort by:

Loading...

Brz works as advertised

Got the Hifonics brz 2100.1 from se and Had it hooked to an old school Hifonics Olympus xxv 2415 and man it pushed the sub very well.If you buy the 2100 make sure you upgrade your electric(big 3,extra battery)will make the amp sound much better..Amp is a beast if you feed it correctly :)

By Jes on February 17, 2013

25

found this helpful.

Can't go wrong with Brutus. Great price!

Phenomenal amp. Gives more than enough power to my 12" Fi Bl at around 1.4 ohms. Since it is class D, it runs very efficiently and puts minimal strain on my stock Jeep Wrangler electrical system, even with its massive power output. Aesthetically one of the best looking amps I have ever owned or seen, the blue lights look awesome at night if the amp is not hidden. Cannot comment on durability yet. As for "ease of use", I found it difficult to set the gains to match an input level of 2 volts because the control ranges from 9V to 0.2V with no markings between. Other than that, superb amp. Buy it, you wont be disappointed!

By Bryce on June 1, 2012

25

found this helpful.

A+ Budget Amplifier

Be real, where else can you get CEA certs for a 2100 watt amp for this kind of money? Maxxsonics has done a fine job of making an aesthetically pleasing amplifier, with all of the power one could need.

I was always proud of finding a pair of Pioneer subwoofers in the trash [and using them for many months], until I got this amplifier. It blew both subwoofers at separate times in the first actual hour of play time. Nothing impressive, but the power output is comparable to an AQ 2200D. I like this amplifier, and yes, the blue LED behind "Hifonics" is even well-constructed enough to stay looking serious about car audio.

By Tom on March 7, 2012

23

found this helpful.

So far, very pleased

I have 2 of these running one coil each on a new Digital Designs 3512sc.
The coil is a D1. The amps run cool and seem to be very efficient.
I did a clamp test with a 45hz tone and with a box rise of about 2.2ohms, I was getting a tad over 1450 watts per amp. (amp is rated at 1400@ 2 ohms)
I have had the amps for a few months now and have given them a few hard, extended runs with out issues.

IMO, a very nice bang for the $$$ spent.
The only thing that I do not like are the rather sharp edges on the cooling fins. Also, where Hifonics puts the tamper stickers on the backs of the amps, they are prone to tearing along the amp seam from mounting.

By Vic on April 8, 2011

23

found this helpful.

Excellent Value!!

I've had this amp for about a week and so far I absolutely love it.

For the price, I feel that this is a really good deal. I was looking for 800wrms @ 4 ohms, and this is what I found. It sucks every amp of current from my stock alternator, I need to upgrade that... but for now, it pushes 1 10" sub pretty hard (and then the lights start to dim at about 80% volume) so there's not a whole lot of sustaining power for the deep bass notes, but that's not Brutus's fault now is it?

I like the features (high and low crossovers, bass eq, bass boost @ 45hz, etc.) and I like the overall appearance of the amplifier. Somewhere I read that these amps appear to be cheaply made. If I was really anal and went over this thing with a fine toothed comb, I might say that the adjustment knobs have a lot of play to them and the plastic parts feel cheap, but everything works properly and I personally have no complaints.

I like the 0 gauge power ground inputs as well as the speaker outputs, all of which are female type terminals. Personally, I love it when I can stuff a wire in a hole and screw it down nice and tight, there are no ifs, ands, or buts about it; that wire isn't going ANYWHERE.

Overall, this is a great product.

By Samuel on December 14, 2010

23

found this helpful.

Great Price, Great Amp

I would easily recommend this amplifier, I have it powering an 18" Incriminator Audio Death Penalty, wired down to 1 ohm, and it doesn't even get warm, stays cool. Have had zero problems & nice easy quick hook ups no problems at all.

By www.youtube.com/travisclaytonaudio on March 4, 2013

22

found this helpful.

bada** amp

I must say for the price i highly recommend this amp to anyone who requires power. I had a fosgate 1000 watt power series amp hooked up at 1 ohm to my Pioneer 12's that required 2000 watts rms and my amp would shut down from time to time but this hifonics amp doesn't shut down at all. Highly recommend for Sonix price cuz i payed $500 for only 1000 watts for my fosgate and i only payed a lil over $300 for this 2000 watt beast. Am highly satisfied with this amp thanks alot Sonic.

By Jimmy on March 18, 2012

23

found this helpful.

GREAT AMP

I got this amp Nov 2010 as a package with 2 RE Audio SEX 12's. The amp hits HARD. I've since sold the RE SEX 12's and had 3 12" Kicker CVX in the car.
I sold the 3 Kickers and now have 2 JL Audio 10w7s which quake.
I'm running the JL Audios @ 1.5 ohms and the amp is killing it!!!

The amp doesn't suck much power as I have a 140 alternator. The JL Audio 1000/1 sucks so much more power than this amp.

By Daddy Warbucks on May 23, 2011

22

found this helpful.

GREAT AMP I BOUGHT

Bout a while ago a hifonics 2600 mono amp and its by far the best amp ive owned... shipping was fast...

By lalo on January 27, 2013

20

found this helpful.

#1 CHOICE!!!

I've owned many amps, this was def my fav, it looks great all lit up, and has plenty of power! Loved it, getting another for the new system!

By Carson on December 20, 2011

21

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


BRZ2100.1D small

Item added to your cart.

Price: $229.99

Essential add-ons
Belva BAK02 1/0 Gauge Amp Wiring Kit

The perfect kit for your perfect amp!

$69.99

$44.99

Add to cart
Belva BAK02BL

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - BLUE

$69.99

$44.99

Add to cart
Stinger SSK0

1/0 Gauge Amplifier Wiring Kit with 2-Channel RCA's

$93.00

$39.95

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
T-Spec V8-3DDC

3.0 Farad Capacitor with Digital Read-Out and Built-In Distribution Block

$116.00

$89.00

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

$14.00

$7.99

Add to cart
0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

$9.99

$4.99

Add to cart
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

$9.99

$4.99

Add to cart
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

$11.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon