Performance meets Value
The new 2010 Hifonics Brutus amplifiers are much more than a good-looking amplifier. Underneath the solid aluminum casing, you will find quality amplifier components that are sure to satisfy any compatible subwoofer. The new BRZ amplifiers have changed the heat sinks on each side to vertical aluminum fins. Since heat rises, these fins draw the heat up and allow it so effectively dissipate from the amplifier. The vertical aluminum heat sinks are located on two sides of the amplifier and effectively maintain the temperature of the amplifier to prevent any overheating. Combined with the other power/protection indicators and the 4-way system protection circuitry, the Hifonics Brutus amplifiers prove to be a safe, efficient, and reliable amplifier for your subwoofer.
Every Brutus amplifier is CEA-2006 certified. That means you can be confident in knowing that you are paying for real power. The wattage that the amplifier is rated at is the wattage that it will consistently produce and supply your subwoofer with. This is typically a feature just found on the higher-end, expensive amplifiers, however all the Brutus series amps are CEA-2006 compliant with a low price tag. By choosing one of these amplifiers, you will be high-grade performance and still have money left over. Performance meets value with the Hifonics Brutus amplifiers!
- Brutus Series Monoblock Class D Car Amplifier
- RMS Power Rating (@ 14.4V):
- 4 ohms: 850 watts x 1 chan.
- 2 ohms: 1700 watts x 1 chan.
- 1 ohm: 2400 watts x 1 chan.
- MOSFET power supply
- Wired HFR-3 remote bass level control included
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +10 dB bass boost at 45 Hz)
- Mono channel operation
- Preamp RCA outputs to daisy chain multiple amps
- 4-Way System Protection circuitry (thermal, overload, speaker short and DC protect)
- Heavy duty aluminum alloy finned heatsink for maximum heat dissipation
- Silver-plated unbalanced RCA level inputs
- Silver-plated molded screw terminals
- Input sensitivity:
- Input Level (Unbalanced): 0.2V-9V
- Input Level (Balanced): 0.04V-18V
- Variable low-pass filter (35-250 Hz, 24 dB/octave)
- Subsonic filter (15-35 Hz, 24 dB/octave)
- Phase Shift: 0-180°
- Damping factor: >290
- Frequency response: 35-250 Hz
- CEA-2006 compliant amplifier
- Dimensions: 19-3/4"L x 9-1/4"W x 2-7/16"H
- 0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
Read more about the Hifonics Brutus BRZ2400.1D in our blog!
Product History: |  |
| (newest, current model) | |  |
| (previous model, replaced by Hifonics Brutus BRZ2400.1D) | |  |
| (previous model, replaced by Hifonics BXi 2610D) | |  |
| (previous model, replaced by Hifonics BXi 2608D) |
|
|
Average Customer Rating is 4.6 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.5 |
| Value | | 4.7 |
| Features | | 4.6 |
| Design | | 4.5 |
| Usability | | 4.7 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
FrankBcool from Albuquerque, NM
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
BAD A$$ AMP! I've ran it at both 1 AND 2 ohms and it slams hard either way, although it obviously hits hardest at 1. If your looking for both SPL and SQ than you've found it in this amp. I recommend beefing up your electric system by AT LEAST doing the BIG 3 UPGRADE and getting a couple STRONG subs that can handle this kind of power. This is not a small, novelty, amp that you get with a $250 system kit. This is a no bull ****, playen with the big boys, rattle your brains out, kick *** amp. I had my system turned up in my back yard while I had to run back in the house for something just to find that not only all the windows in the house rattling but also all the dishes in the kitchen cabinets rattling too! I totally recommend this amp with no question.
|
|
Review by
mrbigkel27803 from rocky mt, nc
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I brouth this amp bout 2 months ago I just hook it up.let me tell anyone that says this amp is a waste of time they CRAZY.this it the truthi got it on 2 12s p3s for now but it going on 2 15.4 hcca. so for you out there buy this its go and its cea rated
|
|
Review by
ski b from chicago, ill
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I recently had a brutus 2608. It was slamming hard already, but when i saw the new brz 2400 brutus i sold my 2608. Once installed i adjusted the amp to my specs, and man let me tell you this amp pounds harder than my 2608 brutus. Had it bench tested and made more than 2600 rms at 14.4 volts. So i really started thinking that the models before the brz model were really overrated. Look out fosgate, kicker, and all the rest of those so called top amps, because hifonics ain't playing. Plus the price is way cheaper.
|
|
Review by
bloody ears from panhandle florida
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I installed this amp along with an auxiliary battery, cap, and big 3 running a single t2 15 and it impresses me everytime i listen to it. With the volume up it shakes the dash and whole car so bad i have to use the remote to turn down the volume or wait for the song to end, no joke. After listening for hours the amp is still relatively cool to the touch, even with it installed @1 ohm. My gain is a little over halfway turned up and bass boost is right at the lowest setting. No distortion or clipping. i also reviewed the rockford fosgate t2 15 dual 2 ohm on this site. might post another review after i get the set-up metered. I'm hoping for low to mid 140's. I also ran the amp on two type r 12s @4 ohms in a sealed box before the t2. The amp was barely turned up and made them slam even @4 ohms with phenomenal sound quality. Put the time and effort into a quality install and you wont be disappointed.
|
|
Review by
mitchell from mequon, WI
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Just installed the amp a few hours ago. very nice finish and very easy and sturdy connections. I had a power acoustik 4000 bamf which was rated higher at 4 ohms then the hifonics, but the brutus was easily louder and cleaner. I am pushing a Fi Q 18 with the brutus and it is hitting cleaner and harder then ever. If i had a choice to buy this amp again i would do it with out thinking. i would recommend this amp to anyone.
|
Customer Service
