Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Planet Audio PEQ10

4-Band Graphic Equalizer with Subwoofer Output and Adjustable Crossover

Discontinued
|

We apologize

This item has been discontinued

PEQ10 Features:
  • 4-Band Graphic Equalizer
  • Fader control for greater audio tuning
  • Input selector switch enables user to choose between main input or auxiliary input
  • Subwoofer frequency control allows user to adjust crossover for low, mid, and high frequencies
  • Paragraphic equalizer controls control the frequency response with boost or cut in each of the frequency ranges; high midrange, low midbass, and subwoofer
  • Includes a rear composite auxiliary input
  • Front master volume control dial
  • Input sensitivity adjustment
  • Dedicated subwoofer output
  • DC-to-DC power supply
  • Night illumination for easy use at night
  • Half-DIN chassis size for a slim installation
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
PEQ10 Specifications:
  • 4 Band Equalizer Frequency: Sub 75 Hz, Low 200Hz, Mid 2 KHz, and Hi 20 KHz
  • Subwoofer Crossover Frequency: 45-180 KHz
  • Frequency Response: 20-20,000 Hz +/- 0.5 dB
  • Signal-to-Noise Ratio: 100 dB
  • Subwoofer Gain: 20 dB
  • Total Harmonic Distortion (THD): 0.005%
  • Maximum Output Level: 7V RMS
  • Input Impedance: 20,000 ohms

Equalizer Specifications

Type of Equalizer
This determines the way the equalizer processes the signal from the source unit. A parametric equalizer allows to you adjust the center point of the frequency band you are adjusting as well the bandwidth which can be narrowed or widened. A graphic equalizer has fixed frequency bands and bandwidth and only the frequency bands can be adjusted. A digital equalizer uses a software program to tune your system.
A graphic equalizer typically has more adjustable bands and is less expensive, whereas a parametric will have fewer bands but offer a greater level of control and provide more tuning options. Digital equalizers will tune your system with the most detail and precision but require a computer and are typically a little higher in price.
Graphic
Equalizer Bands
The number of graphic or parametric equalizer bands the receiver has. The better the EQ, the more likely you will be able to "tweak" your sounds to your desire.
4 band
Equalizer Frequencies
The frequency range that allows control of the center frequency of each equalization band.
75 - 20,000 Hz
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
Built-in Bass Reconstruction
Bass reconstructors, or bass enhancers, improve low frequency reproduction in a car audio system with at least one subwoofer. These bass expander products will help your subs produce accurate bass thumps.
No
Line Driver
A line driver is a small amplifier used to support the strength of the audio signal coming from the source unit.
No
Max Output Level
The maximum level (in volts) of signal output. A higher level will increase the clarity and boost your signal.
7 volts
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20,000 Hz
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.005%
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
100 dB
Width
The width of the item from left to right (side-to-side) measured in inches.
7-13/16"
Height
The height of the item, measured from top to bottom, in inches.
9"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
2"

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
25%
4 Star
50%
3 Star
25%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.0
Value
4.8
Features
3.8
Design
3.5
Usability
4.5

SoundOne

Athens, GA

Overall
Durability
Value
Features
Design
Usability

Pretty Good

January 27, 2013

Great little eq! Needs quality control yhough. In cold weather the left channel goes out. Problem in the volume pot. After it warms up left channel kicks in. Must be a short.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Pedro

bakersfield, CA

Overall
Durability
Value
Features
Design
Usability

Great EQ!

May 4, 2011

One of the best EQ's out there for the price

0 of 0 found this helpful

Help our customers find the most helpful reviews

Oscar

Guatemala

Overall
Durability
Value
Features
Design
Usability

Planet Audio PEQ1o equalizer

February 27, 2011

Great product for a cheap price, totally recommended for enhancing your car audio. Not the best but surely great value.

0 of 0 found this helpful

Help our customers find the most helpful reviews

jesse james

phoenix ca

Overall
Durability
Value
Features
Design
Usability

get what you paid for

January 31, 2011

good quality works well with mids and highs needs improvement in bass

0 of 0 found this helpful

Help our customers find the most helpful reviews

Product Summary

Manufacturer

Model Number

PEQ10

UPC

636210300021

Weight

2.00lbs

Internal SKU

peq10

Internal Product ID

25573

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Planet Audio PEQ10