Expert Service 1-661-257-9993 [Hours]

Tsunami PP92UM-CAP

2 Farad LITEWAVE Series Digital Capacitor with Blue LCD Readout Meter

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

Tsunami PP92UM-CAP

2 Farad LITEWAVE Series Digital Capacitor with Blue LCD Readout Meter

$89.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$10.99
Add Warranty
3 years of protection

NVX Precut Power/Ground Wire (1/0 AWG)

5 ft. of NVX's HyperFlex power/ground cable with high-current transfer and gunmetal gray insulation.

$22.99

Add
Directed DEI Resistors (15-Pack)

Pack of resistors with various values (ohms) perfect for the initial charge of your capacitor.

$1.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Tsunami PP92UM-CAP.

Get FAST answers from customers ASK a Question See questions answers

Tsunami LITEWAVE Series Capacitor

Car audio capacitors are used to store energy for the amplifier to draw on demand and help you get the most from your vehicle's electrical system. High power amplifiers draw large amounts of current from your vehicle's battery putting a heavy burden on your alternator. Capacitors will take the strain off of your vehicles alternator thus giving a longer life span.

The Tsunami LITEWAVE Series 2 Farad Digital Capacitor is perfect for systems up to 2000 watts. It features a bright blue LCD digital display with 8 flashing blue LED's that pulse with the charge/discharge cycles. This capacitor uses ring terminals so it is compatible with any gauge power/ground cable you already may have installed in your vehicle. The PP92UM-CAP includes an extra charging and all the necessary mounting hardware needed for a secure installation.

Product Features
  • Digital Power 2 Farad Capacitor
  • True 2 Farad Capacitor for systems up to 2000 watts
  • State of the art hybrid performance
  • Bright LED voltage display
  • Delivers constant power to your system for better sound
  • Working voltage of 18V with a surge of 24V
  • Current sensing automatic turn-on
  • Automatic turn-off timer
  • High/Low voltage warning
  • Reverse voltage protection alarm
  • Top distribution block with 1/0 AWG inputs and outputs
  • 4 AWG gauge reducers for use with 4 gauge wires
  • Includes mounting hardware for a secure installation
  • Color is Silver/Black with Red decals
  • Dimensions: 3-3/4"D x 3-3/4"W x 10"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Capacitor Specifications

Capacitance (farads)
Capacitors are rated in farads, and at times microfarads or millionths of a farad. The more farads the capacitor is rated at, the more electrical charge (and wattage) the capacitor will hold. Capacitance is defined as the property of storing an electrical charge between two separate conductors.
2 farads
LCD Meter Display
Displays the current voltage and/or other specification on an LCD readout.
Yes
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
1/0 AWG
Maximum Output Gauge Size
This number refers to the maximum size of wire that will fit into the output connector(s) of the capacitor, battery terminal, or any other connector with an wire output.
1/0 AWG
Built-In Distribution Block
A built-in distribution block simply means that the item includes a distribution block. The built-in distribution block will split the single power input into a multiple power output.
Yes
Primary Color
This is the main color of the item.
Silver
Secondary Color
A color that compliments the main color of the product.
Black
Illumination
This is the color of the illuminated LED lights on the unit.
Blue
Width
The width of the item from left to right (side-to-side) measured in inches.
3-3/4"
Height
The height of the item, measured from top to bottom, in inches.
10"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
3-3/4"

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
85%
4 Star
10%
3 Star
5%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.9
Value
4.9
Features
4.8
Design
4.7
Usability
4.9
Mark

Grayson, GA

Overall
Durability
Value
Features
Design
Usability
great capacitor

February 22, 2014

this capacitor held up the voltage with no problem for my amp, no more dimming lights and no loss of power. subwoofers keep pumping without a problem, i currently run a kenwood amp 500w rms @4ohms with a polk audio mm1240 subwoofer

6 of 7 found this helpful

Was this review helpful to you?

That guy

Vicksburg,ms

Overall
Durability
Value
Features
Design
Usability
Really great product

January 14, 2013

It's a really great product for systems up to 1800 watts. Worth buying.

5 of 6 found this helpful

Was this review helpful to you?

Abiezer

Galloway, NJ

Overall
Durability
Value
Features
Design
Usability
Very good cap

May 4, 2012

works exelent ,conect to orion 2400 watts and 2 alpine 12' tipe r
its really help, lights barely dim at all

4 of 5 found this helpful

Was this review helpful to you?

Mikesoft

Branson MO

Overall
Durability
Value
Features
Design
Usability
Great Cap

March 19, 2012

This is a great product, top of the line. The difference in sound quality before and after installation is huge. Overall I am very satisfied I purchased this cap. No more problems with low sound because of inadequate power or light dimming.

4 of 5 found this helpful

Was this review helpful to you?

israel

woodbridge, VA

Overall
Durability
Value
Features
Design
Usability
is good

March 13, 2012

Is good Tsunami guarantee, the model is very nice.

4 of 5 found this helpful

Was this review helpful to you?

DirkDiggler

Texas

Overall
Durability
Value
Features
Design
Usability
Tsunami Cap

September 19, 2011

Works like it should.

5 of 7 found this helpful

Was this review helpful to you?

Ian

Williamsport, PA

Overall
Durability
Value
Features
Design
Usability
Great Capacitor

June 28, 2011

This is a great capacitor for the price. I had dimming problems in my car running a Type-R off of 500 watts at high volumes. After adding this capacitor I no longer have dimming problems. I'm replacing my alternator soon but will continue to have this capacitor as part of my system. Fits 1/0 gauge wire just fine. Display is a bit bright but mine is in the trunk so I don't see the lights.

4 of 5 found this helpful

Was this review helpful to you?

Kris

Garden City, KS

Overall
Durability
Value
Features
Design
Usability
Mounting options extrordinaire

December 17, 2012

Plenty of capacitance for a lower power system (900 watts) and so easy to connect to external distribution blocks and amplifiers with its built in distribution block. No extra and expensive D-rings required. Nice blue LED voltage display easy to read from a distance. Mounting feet are very secure and look great. It even chirps if you accidently reverse polarity of the power connections!

3 of 4 found this helpful

Was this review helpful to you?

Mike

Florida

Overall
Durability
Value
Features
Design
Usability
Great price

June 4, 2012

It keeps my lights from dimming and I think my amp is not getting hot as fast as it did before. Anyways, I like it.

3 of 4 found this helpful

Was this review helpful to you?

Adam

Fort Wayne, IN

Overall
Durability
Value
Features
Design
Usability
Great Cap!

May 31, 2012

This cap has worked great for the system I have it working with. No strain on the battery with this cap in line. Highly recommended!

3 of 4 found this helpful

Was this review helpful to you?

Propilot

Newnan, Ga

Overall
Durability
Value
Features
Design
Usability
Tsunami PP92UM-CAP

April 24, 2012

I bought this Tsunami cap to replace an older one that was too small. I have a Kenwood 1000 watt amp that I am using it for. It doesn't work too hard and keep the charge with no problem. It has exceeded my expectations.

3 of 4 found this helpful

Was this review helpful to you?

Shak

Boston, Ma

Overall
Durability
Value
Features
Design
Usability
led strips

February 8, 2012

Just like the way you see it is how it comes. A really great product, I put it in the trunk of my Honda for more light and man does it light up the whole trunk. It a lot better than your factory lights also you can keep your factory light and add on with this led light strip.

3 of 4 found this helpful

Was this review helpful to you?

Done!!

Dayton, Ohio

Overall
Durability
Value
Features
Design
Usability
You get what you pay for !!

December 17, 2011

Recently bought this cap. When i installed it everything was fine went to change subs from 4 to 2 ohm disconnected cap when i went to re install the cap the pos top block spun and grounded out against the neg block on top of cap not put on very well. Cap arched and smelled burnt worked good other than that. Not one i would suggest to get if you play with your system much not the best quality design but will work.

3 of 4 found this helpful

Was this review helpful to you?

Matt

Cleveland, Ohio

Overall
Durability
Value
Features
Design
Usability
Awesome

May 5, 2011

Easy to charge, looks sweet, works great... overall is an awesome cap. Keeps my voltage around 14 volts at 1000RPMs. Of course lights dim at idle because alternators dont turn on at 500RPM (my idle rpm)... but thats expected. On a RE Audio DTS1000.1

4 of 6 found this helpful

Was this review helpful to you?

txplshrk

Corpus Christi, TX

Overall
Durability
Value
Features
Design
Usability
Nice Cap

January 16, 2013

Well I have installed caps before, but most were 1F and they didn't have the nice Allen wrench hook ups like this one. They also didn't have a built in distribution block. I connected the 4 gauge cable from my battery to this thing, then to my amp distribution blocks, and ran the 8 gauge to my amps. I did the same thing with the ground. Ran the 4 gauge ground to the car and then to the cap. Then to the distribution block, and then 8 gauge to the amps. This thing was a breeze to install, and it charges really quick. The meter on this one is quick to report and a lot better than some of the cheaper caps I have tried before. I have a 1000 Watt Profile Amp running to my mids and highs and a 700 Watt Mono Profile Amp running to my subs. My subs are wired 2 ohm. Those wattage levels are max watts. I haven't seen any dimming of the lights, and both the battery and the cap are reading 13.5 when the car is sitting at idle and the system is pumping. So far this looks like a good buy! I didn't get a chance to see what voltage levels were at hwy speeds cause my son had to leave right after I installed it. We will see if this thing keeps the battery from dying anymore.

2 of 3 found this helpful

Was this review helpful to you?

John

Dunedin, FL

Overall
Durability
Value
Features
Design
Usability
Keep that amplifier from fading...

August 8, 2012

Supporting a Crunch PZA 1400.2 powering 2 Kenwood 10" subs. Will add a second 4 channel amp to bolster the 6x8's that are currently powered by the head unit. Easy install - Head lights do not flicker, and Voltage does not drop below 13.7 volts. So worth it.
Definitely doing its job and keeping the Amplifier supplied with all juice it needs to keep those subs pounding hard.

2 of 3 found this helpful

Was this review helpful to you?

Shark

Netherlands Antilles

Overall
Durability
Value
Features
Design
Usability
Great product !!!

June 27, 2012

I purchased this product to take off the load from the battery and it definitely did the job and more! I definitely recommend it.

2 of 3 found this helpful

Was this review helpful to you?

Justin

Jacksonville, FL

Overall
Durability
Value
Features
Design
Usability
Quality Capacitor at a great price!

June 12, 2012

The cap helped my system out Tremendously, and now my sub sounds completely different and bumps harder!

2 of 3 found this helpful

Was this review helpful to you?

Damien

Canada

Overall
Durability
Value
Features
Design
Usability
Power on demand

June 7, 2011

I chose this cap because of how it has a built in distribution block. Easy to hook up and performs very well. Running two PDX amps with it and have no issues. Great cap for the money.

3 of 5 found this helpful

Was this review helpful to you?

JAMES

ANSONIA, CT

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
great capacitor

October 17, 2015

bought this in 2012, and now its almost 2015 and its still going strong! keeps almost a constant 14.4 when the bass hits.

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX Precut Power/Ground Wire (1/0 AWG)

5 ft. of NVX's HyperFlex power/ground cable with high-current transfer and gunmetal gray insulation.

Your Price $22.99

NVX XW0BL20

20 Ft Pre-Cut Piece of 1/0 Gauge EnvyFlex Power or Ground Wire

Your Price $89.99

Directed DEI Resistors (15-Pack)

Pack of resistors with various values (ohms) perfect for the initial charge of your capacitor.

Your Price $1.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

PP92UM-CAP

UPC

086429213726

Weight

4.15lbs

Internal SKU

pp92umcap

Internal Product ID

27069

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Tsunami PP92UM-CAP