Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

JL Audio C3-570

Evolution C3 Series 5" x 7" / 6" x 8" 2-way Convertible Component Speaker System

Out of Stock - Backorder
|

List price $499.95

$369.95

with warranty

You Save: $130.00 (26.00%)

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

Bundled Savings with this Product

=

FREE Sound Dampening!

For a limited time, get a free NVX SDVK4 Versa Kit with a qualifying pair of speakers! Sound dampening will eliminate rattles, insulate against heat, and also improve the sound and output of your speakers!

19.99

27139

159

JL Audio C3-570

$369.95

+

100% OFF

NVX SDVK4

$19.99

Special Price $0 ($19.99 if purchased separately)

NVX SDVK4

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• One 18" x 32" Piece

(Offer 1 of 1)

Combined Total Price

$369.95

You Save $19.99

  • Evolution C3 Series 5" x 7" / 6" x 8" 2-way Convertible Component/Coaxial Speakers System
  • Power Handling:
    • Peak: 300 watts per set / 150 watts each side
    • RMS: 150 watts per set / 75 watts each side
  • Also fits 6x8-inch factory locations
  • Perfect fit in most newer Ford vehicles
  • Configured for two and four-hole mounting configurations
  • Mineral-Filled polypropylene cone (Ferrite Magnet)
  • Rubber surround
  • 1" Silk dome tweeter (Neodymium magnet)
  • Ferrofluid cooling & damping
  • Injection-Molded polymer frame
  • DMA-Optimized motor system
  • Symmetrical roll spider
  • Fixed angle flush-mount, surface-mount and coaxial-mount systems included for tweeter
  • Included Crossover Features:
    • 4-Position adjustable tweeter level
    • 3-Position adjustable midrange presence
    • Premium mylar capacitors
    • Premium air-core inductors
    • 1st Order low pass filter
    • 2nd Order high pass filter
  • 4 ohms impedance
  • 1-1/4" Kapton Former voice coil
  • Mounting Depth: 2-1/2"
  • System Efficiency: 90 dB
  • Frequency Response: 48-25,000 Hz
  • Replacement woofer available: JL Audio C3-570CW
  • 1-year Sonic Electronix warranty

Priced Per Complete Component System

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Evolution C3 (JL Audio)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
5" x 7" (also mounts in most 6" x 8" locations)
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Silk
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Mineral-Filled Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
150 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
75 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
48 - 25,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-1/2"
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
No

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
67%
4 Star
33%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
3.8
Features
4.8
Design
4.5
Usability
4.3

AXMRDR

Morrilton, AR

Overall
Durability
Value
Features
Design
Usability

Nicest speakers I have owned

September 9, 2013

I bought 4 of these on sale and I'm quite happy with them. They have a separate crossover device which is kinda bulky and could make installation a challenge if space is tight but it works very well. I had plenty of room in my F-350 but in a compact car it could be tight. It can increase or decrease the gain of a specific frequency to tailor it to your system. The sound is nice and the tweeters can be detached and be used as satellites. When spending this much on speakers you will need a high end head unit or you are wasting your money. These may or may not not be the best speaker out there but they are the nicest set that I have ever owned. Bottom line: I would buy these again.

0 of 0 found this helpful

Help our customers find the most helpful reviews

KillaV-TT

Ft. Worth, TX

Overall
Durability
Value
Features
Design
Usability

Smooth, Accurate speakers

May 28, 2013

I bought these speakers last December, so I was running them for five months. They do sound really good. I had them crossed over at about 100 hz so I can't comment on lower bass extension. But the mids and highs are pretty good. Excellent as a matter of fact. Much better than the Pioneer's that they replaced (TS-6802R), but they should be at 4x the cost. The thing that is most evident, is that these speakers do not fatigue the ears, like many cheaper speakers even at high volume. I had the four door speakers (2 JL audio in front doors, 2 Alpine in the back doors) powered by a Rockford Fosgate P-500-4 running through a JL audio Clean Sweep from factory Head Unit.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Preston

Geismar, LA

Overall
Durability
Value
Features
Design
Usability

amazing

March 16, 2013

i bought these last week just put them into my 1999 f150 regular cab today had a day off i have had other brands of highs and mids and these by far are the best jl audio is worth every penny blows all the other out of the water i have them hook up there my radio for right now waiting on my amp to get in i bought a couple days ago but even with out a amp the sound quality is simply amazing crystal clear i can only image when my jl audio amp gets in spend the extra money and buy jl audio

0 of 0 found this helpful

Help our customers find the most helpful reviews

G

Troy, IL

Overall
Durability
Value
Features
Design
Usability

Awesome Sound!

February 12, 2013

Installed these in a 2011 F-150 to replace factory door speakers. These are expensive but when paired with JL Audio subs, these sound incredible!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Parrotheadad

Ocala, Fl

Overall
Durability
Value
Features
Design
Usability

Sweet and powerful

January 31, 2013

I was looking for a component solution for my 2009 F150 and the standard 5x7 component sets that are mostly available on the market were not very good quality or performance. They typically sound tinny and shallow at best. I bought these speakers without hearing them and really felt I was taking a chance. To my surprise they are incredible and represent a solid value. I custom mounted the tweeters in my pillars up high and the soundstage produced is huge compared to using the factory locations lower in the door panel. This really goes against the installation guidelines due to the distance between the drivers yet I never sense any gap in the sound. They are driven by a Sounstream Reference 4 channel amp and the combo works great together. My music taste vary anywhere from classic rock to country to jazz and in all genres they deliver. The crossovers have enough flexibility to allow you compensate for different placement and acoustic situations. The woofer / mid-woofers are not going to give you mighty bass but they will give you a warm midrange and midbass. The tweeters are the best part as they reveal all the subtle differences in your music maybe some you have never heard before. II highly recommend them.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Hyosilva

Keene, NH

Overall
Durability
Value
Features
Design
Usability

JL Audio C3-570

July 29, 2012

Stable highs and sturdy lows, these speakers are perfect no matter what genre you prefer.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $49.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $69.95

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $46.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Items we think you might want

C5-570 thumbnail

JL Audio C5-570

• 225 watts Peak
• 75 watts RMS
• Mineral Filled Polypropylene Cone
• Butyl Rubber Surround
• 4 ohms
• Silk Dome Tweeter

Your Price $449.95

Product Summary

Manufacturer

Model Number

C3-570

UPC

699440990219

Weight

9.00lbs

Internal SKU

c3570

Internal Product ID

27139

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JL Audio C3-570