Why Shop Sonic Free Shipping Free Tech Support Easy Returns Low Price Guarantee Details
Free Kicker active-style headphones with a purchase of $100+ of Kicker Gear

Precision Power PPI PC1000.1

1000W RMS Power Class Series Monoblock Class D Car Amplifier

No customer reviews yet. Be the first!

Specials with this product

  • Free Ground Shipping to the 48 statesdetails
  • Power Class Series Class D Monoblock Car Amplifier
  • RMS Power Rating:
    • 2 ohms: 1000 watts x 1 chan.
    • 1 ohms: 1000 watts x 1 chan.
  • Individually regulated preamp/crossover power supplies ensure signal purity
  • Low ESR capacitance banks compensate power supply ripple currents
  • Extra low current drive stage increases efficiency and sound clarity
  • Large TO218 MOSFET Transistors
  • Full signal path low noise/distortion circuitry topology
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost at 30-90 Hz)
  • Monoblock operation
  • Differential drives divide pre-amp and power-amp stages, eliminating ground looping
  • Close tolerance signal path components - 1% resistors and 5% capacitors
  • Sequenced delays eliminate residual power-up/power-down pops
  • Differential RCA inputs isolate 12V/audio to ground
  • Triple Darlington audio output stages
  • 2 Oz. Copper traces transfer high volume internal current
  • 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
  • Separate capacitor charging/discharging current paths prevent rail switching spikes and ground traces from entering signal stages
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Gold-plated screw terminals
  • Input sensitivity:
    • Level: 200mV-9V
  • Variable low-pass filter (50-200 Hz)
  • Subsonic filter (15-50 Hz)
  • Frequency Response: 15-200 Hz
  • Damping factor: >2400
  • Dimensions: 16"L x 10"W x 2-5/16"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Power Specifications - Full Range Channels
RMS Power @ 4 ohmsN/A
RMS Power @ 2 ohms1000 watts x 1 channel
RMS Power @ 1 ohm1000 watts x 1 channel
Bridged RMS PowerN/A
Peak Power OutputN/A
Amplifier Specifications
Amplifier ClassD
Number of Channels1 - Mono
Total Peak Power OutputN/A
Total RMS Power Output1000 watts
Maximum Input Gauge Size4 AWG
Minimum Impedance Unbridged1 ohms
Minimum Impedance BridgedNot Bridgeable
THD at Rated RMS Power0.02%
Speaker Level InputsNo
Preamp OutputsNo
Built-in CrossoverLow-pass (LP)
High-Pass Crossover FrequencyN/A
Low-Pass Crossover Frequency50 - 200 Hz
Subsonic Filter15 - 50 Hz
Signal-to-Noise Ratio102 dB
Channel SeparationN/A
Bass Boost0 - 12 dB
Bass/Gain RemoteYes
Fan CooledNo
Fuse Rating150A x 1 
CEA-2006 CompliantNo
Warranty and Return Policy
Return Policy Standard Return Policy
Parts Warranty Duration1 year
Labor Warranty Duration1 year
Warranty ProviderManufacturer
Nobody has rated this product yet.
Share your thoughts with others:
Amplifier Wiring Kits
Get the wires you need to properly install and power your car amp.
 ProductPriceAdd?
Kicker ZCK4Kicker ZCK4
Complete 4 Gauge Amp Wiring Kit with RCA Interconnect Cables and Speaker Wire!
$94.99
StreetWires ZN1K-04StreetWires ZN1K-04
4 Gauge (AWG) ZN1 Series Single Amplifier Installation Kit for Systems up to 1000 Watts
$37.99
Kicker PKD4Kicker PKD4
Dual Amplifier 4 Gauge Amp Installation Kit w/ Distribution Blocks
$119.99
Gauge Adapter
In situations where the input gauges on the amplifier is smaller than the power/ground cable gauge, one of these gauge adapters should be used. They are easy to use and enable your amplifier to to still receive all the power that it requires.
 ProductPriceAdd?
Monster PowerQuip Power Cable Adapter (0/1 AWG to 4 AWG)Monster PowerQuip Power Cable Adapter (0/1 AWG to 4 AWG)
Monster 400 Series PowerQuip gauge reducer allows a 0/1 AWG cable to fit in a 4 AWG input
$15.00
Stinger Gauge Reducer (0/1 AWG to 4 AWG)Stinger Gauge Reducer (0/1 AWG to 4 AWG)
Gold plated gauge reducer allows 0/1 AWG cable to fit in 4 AWG inputs
$9.99
Speaker Wire
Improve the sound quality by delivering more power when replacing your factory wiring. High quality speaker will maximize your amplifier investment and system performance.
 ProductPriceAdd?
Kicker XW1220 Speaker WireKicker XW1220 Speaker Wire
12 Gauge Wire - 20 ft. of Dual Twist Speaker Cable with Sleeves for a Clean Install
$24.49
StreetWires SCP1215BL - 12 AWG Speaker WireStreetWires SCP1215BL - 12 AWG Speaker Wire
12 Gauge Wire - 15 ft. of Speaker Cable with Twisted Construction
$19.99
RCA Interconnects
You will need a good set of RCA interconnect cables to connect your amplifier to your head unit. Using high quality cables ensure the best sound possible by reducing unwanted noise interference, providing tight contacts, and utilizing the latest in cable technology.
 ProductPriceAdd?
Kicker X-Series RCA Interconnect CableKicker X-Series RCA Interconnect Cable
16.5 ft. of 2-Channel Interconnects with twisted pair conductors, K-cut gold plated contacts, and hyper-flex technology for easy installation!
$26.99
Monster Cable 400 Series XTREME RCA Interconnect CablesMonster Cable 400 Series XTREME RCA Interconnect Cables
16.4 ft. of 2-Channel Monster Cable with XLN (Xtra Low Noise) construction, 8-cut turbine MirrorChrome connectors, and 3-way time correct windings for the ultimate RCA cable!
$69.00
StreetWires ZN9 Series Interconnect CableStreetWires ZN9 Series Interconnect Cable
16.4 ft. of 2-Channel ZN9 Cable with Rhodium-plated connectors, twisted-pair construction, and the the highest quality of signal transfer.
$54.99
Installation, Tools & Accessories
With our professional install card, you can have your amp installed by a pro near you, or you can purchase tools and do the install yourself.
 ProductPriceAdd?
StreetWires FB4StreetWires FB4
4 AWG / 4 Gauge Firewall Bushing
$7.99
StreetWires FB0StreetWires FB0
1/0 Gauge Firewall Bushing
$4.99
Kicker DB1448 (09DB1448) - Top of the Line!Kicker DB1448 (09DB1448) - Top of the Line!
Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs
$18.99
Professional Installation for your Car Power AmplifierProfessional Installation for your Car Power Amplifier
Covers labor charges through our professional installer network.
$89.99
Testing and Performance
Optimize your system's performance with testing tools such as SPL meters, bass test discs and more!
 ProductPriceAdd?
AutoSound 2000 CD-104AutoSound 2000 CD-104
The ultimate amplifier level setting disc used for evaluation of audio components
$12.99
AutoSound 2000 CD-102AutoSound 2000 CD-102
High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.
$12.99
AutoSound 2000 CD-103AutoSound 2000 CD-103
Audiophile reference series test disc for evaluation of all audio components.
$12.99
Main Product
 ProductPriceAdd?
Precision Power PC1000.1Precision Power PPI PC1000.1$259.95

Product Summary

Manufacturer: Precision Power
Model number: PC1000.1
UPC: 709483036338
Weight: 16.00 lbs
Internal SKU: pc10001
Internal product ID: 27257

Price Information

$499.95

–$240.00

$259.95

Add an Optional Extended Warranty

Add

$32.99

$

Limited stock

save to wish list

Musical Mayhem Sweepstakes sponsored by MTX Audio. 3 winners, $2,300 in prizes!

Customer Testimonial

Purchased a Kenwood from Sonic and they had the lowest price for the unit which also included an install kit and wiring harness! It was received within 3 days and their packaging was flawless! I would buy from them again in a heartbeat.

- Michael C. from tempe, az

See more…

Recently Viewed Items

pc10001 thumbnail

8" Blueprint Series In-Wall Subwoofer

pc10001 thumbnail

6-1/2" Blueprint Series 2-Way Rectangular In-Wall Speakers

pc10001 thumbnail

Dual 5-1/4" 2-Way In-Wall Video Shielded LCR Speaker