RE Audio XT Amplifier Series
Working in a successful car audio system requires careful planning and quality components. Working in more affordable pricing for high quality product is easier now more than ever with RE Audio’s introduction of the XT Series of amplifiers. The entire line is crafted with precision from the ground up, beginning with the perfectly symmetrical circuit boards – RE Audio designs these with pride showcasing their cleanliness from the circuitry up.
An elevated efficiency platform makes these amplifiers drain less strain on your vehicles charging system to allow for more power output with less draw from your vehicles battery and alternator. Great power output in an affordable package with clean power output is what’s desired from every amplifier on the market, and the RE Audio XT Series of amplifiers provides this with their Multi-Channel and Monoblock lineups.
Offering specific models for 2-Channel, 4-Channel, and Monoblock applications RE Audio has provided a plethora of options to use their amplifiers in, be it an entry level system to a high end competition system. XT Series Amplifiers provide some of the best available value, and don’t cut back on their quality – an amplifier that truly defines quality meeting value.
Product Featuers
- XT V3 Series 2-Channel Class DE Car Amplifier
- RMS Power Rating:
- 4 ohms: 100 watts x 2 chan.
- 2 ohms: 200 watts x 2 chan.
- Bridged, 4 ohms: 400 watts x 1 chan.
- Dynamic (Max) power output: 1000 watts
- High speed digital stereo amplifier
- Elevated Efficiency Platform guarantees the abundance of power, without a heavy drain on the vehicles charging system
- Remote bass level input (remote level control sold separately)
- Pulse Width Modulated MOSFET power supply
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +12 dB bass boost at 45 Hz)
- Screw terminal barrier strip speaker connector accepts 8-18 AWG speaker wire
- Soft start turn-on technology
- 2/1 channel operation
- 1 RCA Pair of preamp RCA outputs to daisy chain multiple amps
- 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heatsink for excellent heat dissipation
- Convention cooling system
- Nickel-plated RCA level inputs
- Nickel-plated screw terminals
- Maximum Input Signal: 6V
- Maximum sensitivity: 200 mV
- Fully adjustable butterworth high and low pass crossover filters
- Variable high-pass filter (40-1,000 Hz, 12 dB/octave)
- Variable low-pass filter (40-250 Hz, 24 dB/octave)
- Subsonic filter (15-40 Hz, 24 dB/octave)
- Average Efficiency:
- Damping factor: 300 @ 4 ohm
- Output Regulation: 0.12dB @ 4 ohms
- Signal-to-Noise Ratio: 110 dB
- Frequency response: 5-50,000 Hz
- Dimensions: 9-3/4"L x 10"W x 1-7/8"H
- 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- Also Found As: RE Audio, US Amps, XT8002V3, XT-8002V3, XT800 2V3, XT-800.2V2
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
*There is a misprint on both the product manual and packaging that lists incorrect power output. As an Authorized RE Audio dealer, we have confirmed the accuracy of our specifications and are certain that our listed specifications reflect the corect information.
|
Average Customer Rating is 4.0 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.0 |
| Value | | 4.5 |
| Features | | 4.0 |
| Design | | 4.5 |
| Usability | | 4.0 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
Whoajack from Princeton, NJ
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I have gone through two of these. It worked great as Long as I didn't drive for longer than an hour and a half, because if I did they basically caught on fire. Both times with my bass low cause I know I'm going on a long drive, that nice smell of burning plastic came up, and the bass would completely shut off. The red light for protection indicated it's over heating, which is fine, I just think this is more of a speaker amp than a sub amp. Just so you know I have two reference 1262 Infiniti subs and this was the recommended amp in the package deal.
|
|
Review by
Curt from Saint Louis, MO
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I know that this is one of the best amps you can buy period hands down! Omg this RE Audio XT-800.2V3 hits my Cerwin Vega 12s so hard and clean bass. I'm just so amazed at this small amp but mean as hell with the power it puts out. The place that hooked it up they were stunned at it's power that it was putting out. If you are looking for some big power to run some 12s, any 12s, then this is the amp to go with!!
|
Customer Service
