Expert Service 1-877-289-7664 [Hours]

RE Audio SXX10D2

10" Dual 2 ohm SXX Series Car Subwoofer

In Stock
|

List price $589.99

$199.98

with warranty

You Save: $390.01 (66.10%)

Order within 13 hrs 13 mins to ship 7/14

Arrives by Friday, July 18 to zip 94107

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Fri, July 18

RE Audio SXX Subwoofers

RE Audio raises the bar for high output with the SXX line of their competition grade, high excursion subwoofers. With an impressive power handling rating of 1000 Watts RMS – this subwoofer shows you it’s meant for those serious about quality bass.

Every single component of this subwoofer has been crafted with precision in mind to obtain full, impactful bass. From its 3” eight layer aluminum flat voice coil, to its triple stacked magnets this high powered subwoofer will output with fine clarity.

The entire SXX line of subwoofers can handle an impressive 1000 watts of RMS continuous power, no matter the size! With its large Rubatek Foam surround and FEA optimized motor structure; this woofer can handle large amounts of power, while maintaining durability. The RE Audio SXX Subwoofers series is certainly one subwoofer manufactured with hi-fidelity audio in mind.

Subwoofer Features:
  • 10" Dual 2 ohm SXX Series Car Subwoofer
  • Power Handling:
    • RMS: 1000 watts
  • Impedance: Dual 2 ohm
  • Dual composite 2-piece cone
  • Rubatek foam surround
  • FEA Optimized motor structure
  • Progressive spiders
  • Wrap around rubber gasket
  • Tork-Tite terminals
  • 3" 8-Layer voice coil
  • Cast aluminum basket
  • Triple stacked magnets
  • Designed specifically for ported/vented enclosures
  • Also available in a Dual 4 ohm: RE Audio SXX10D4
  • Proudly made in the USA
  • Also found as: sxx 10, sxx10, sxx 10d2, sxx-10, sxx-10d2
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
SXX 10" T/S Parameters:
  • Electrical Q Value (Qes): 0.29
  • Mechanical Q Value (Qms): 4.3
  • Total Speaker Q Value (Qts): 0.27
  • Free Air Resonance (Fs): 30.7 Hz
  • Equivalent Compliance (Vas): 21.8 liters
  • One-Way, Linear Excursion (Xmax): 22 mm
  • Efficiency (SPL 1W/1m): 85.2 dB SPL
  • Effective Piston Area (Sd): 310 cm2
  • DC Resistance (Re): 1.9 ohm
  • Nominal Impedance (Znom): Dual 2 ohm
  • Thermal Power Handling (Pe): 1000 W
  • Force Factor (Bl): 21

For more information on the Thiele and Small Parameters, visit our T/S Parameters Article

Product History:

RE Audio SXXv2-10D2 thumbnail
(newest, current model)
RE Audio SXX10D2 thumbnail
(previous model, replaced by RE Audio SXXv2-10D2)

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
SXX (RE Audio)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
1000 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
3"
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85.2 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
22 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Dual Composite 2-Piece Cone
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubatek Foam
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Triple Stacked
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.0 cubic feet
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6-1/2"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-1/4"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
30.7 Hz
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
21.8 liters
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
0.27
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
0.29
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
1.9 ohms
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
4.3

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
4.9
Usability
5.0

William

Reading, PA

Overall
Durability
Value
Features
Design
Usability

RE audio sxx10d2

July 8, 2014

This sub hits some serious lows even in a smaller L ported enclosure tuned to 34hz powered by the NVX 1200.1JAD amp. the amp throws the power and this thing takes every watt through the car and myself.Serious boom from a 10. Going for 2 next.

0 of 0 found this helpful

Help our customers find the most helpful reviews

jake

albany NY

Overall
Durability
Value
Features
Design
Usability

re sxx d2 10

April 3, 2014

I have two subs hit brilliant highs and lows I wanted power and clarity in a sub and that is want you will receive

0 of 0 found this helpful

Help our customers find the most helpful reviews

Derek

APO, AP

Overall
Durability
Value
Features
Design
Usability

Great Speaker

May 19, 2013

I have always been a fan of JL Audio and have not bought anything since I became a fan. But since I have been living in Japan, speakers are hard to come by, so I found this site, read the reviews for RE Audio and thought I would give them a try. Best money spent, sounds as good if not better than JL Audio speakers. I would definitely recommend this speaker to anyone on a budget. I built a ported box using the RE Box calculator (can google it) and I could not be happier. Great speaker and great sound!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

stromy

iowa

Overall
Durability
Value
Features
Design
Usability

hits hard

March 28, 2013

These subs hit harder than any 10s I've heard. I have 2 running off of a ppisedona 2000 amp plus a 600 watt kinetik battery. They bang. Definitely a must have.

0 of 0 found this helpful

Help our customers find the most helpful reviews

jp

littlefalls MN

Overall
Durability
Value
Features
Design
Usability

RE AUDIO!!!!

June 12, 2012

wow!! Just took two boston 15's out of my car because they didn't sound right, nothing against Boston. These particular subs just didn't have the sq i was looking for. I bought this sub a mounth ago. didn't know what to do with it. Price was just too good to pass on. long story short, I replaced two 15's with this single 10" and i was speechless. Have it in vented box on brutus1200.1 @ 1 ohm. All of wich i got from sonic!! This sub has better SQ than the Alpine, Boston, and Kicker subs i'v had. I'm getting another one ASAP. This was my first RE audio purchace and it wont be my last. Great quality subwoofer. I havent found any cons to it yet. I would recomend this to anyone.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ryan

Longview, tx

Overall
Durability
Value
Features
Design
Usability

Best sub ever

March 13, 2012

I've had this sub in my truck for about 5 months now and I love it! It was in a custom built box tuned to 32 htz and sounded amazing. It's louder and has better sound quality than all my friends that have multiple subs. I recently upgraded to 2 of the monsters and it's just crazy loud. I have them running off 2000rms and it's insane and still sounds perfect. Stay away from kicker bs if you want sound quality and spl, this sub is for you.

0 of 0 found this helpful

Help our customers find the most helpful reviews

james

cape girardeau

Overall
Durability
Value
Features
Design
Usability

ABSOLUTE LOW BASS MONSTER!! TRULY UNBELIEVABLE !!!

November 17, 2011

I was in the market for another subwoofer that could outperform my kicker L7 and i definitely found it!! i had a 10" kicker L7 in a 1.7ft3 ported box tuned to 32 hz and it hit pretty hard for a 10. i had it running on an old school rockford fosgate power 800a2. i found the re sxx 10 on sonic, looked at the specs and price and jumped. i built a custom box for it to fit in my mustang convertible at 1.6ft3 and tuned it to 30 hz. that thing slams hard! it sounds like i have at least 2 10's in my car. i am really shocked at the low bass output of this thing. when i say low bass, i mean 30-40 hz.it will audibly play down to 25 hz. i know re recommends only 1.25ft3 but i really like super low bass and smooth response. i have a couple of box building programs so i played around with enclosure and port sizes and that is what i came up with to fit the sound that i wanted. for those of you who really like extended low bass response go with this size: 1.6ft3 with a 4" port 20.5 inches long. i used an aeroport. i know there are a lot of other subs that perform as well or better ie, DD, FI, ORION HCCA, but factor in the cost of those subs and you will see why i went with SXX. one more thing... make sure you have enough power to run this thing. the 1000 watts rms rating of this sub is no joke....it can handle all the power of my rockford power 800a2 amp with grace. if you choose to go with a pair of these, you need to pump them at least 1500 rms, if not your wasting your time. if you have the power and put it in the right box you will absolutely love it!! BUY EM!!!!!!!!!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Boom Box

Philly, PA

Overall
Durability
Value
Features
Design
Usability

Smart Buy

September 22, 2011

I had one of these in my 05' explorer powered by a Kenwood Excelon (XR-1S) that amp was pushing about 700-750 RMS in a port box. HOLY WOW ! I know there are guys out there running 1000+ RMS on these subs all day long... this sub drops bottom, and is quick to hit also. I listen to rap, rock, metal, and country - deff a dynamic sub. my friends called it the "Baby Boom Box" lol. This sub was out performing some friends 12's with no problem !!! You wont be disappointed with this sub !!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

nick

marthasville, MO

Overall
Durability
Value
Features
Design
Usability

BEST 10INCH SUB I EVER HEARD

September 22, 2011

Has great low bass i run one with a Rockford Fosgate Punch P1000-1bd and it slams for one 10 great sub im thinking of two now.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ron

Cleveland, OH

Overall
Durability
Value
Features
Design
Usability

impressed

April 5, 2011

I am a first-time subwoofer owner and this is an excellent piece to add to your system. Hooked it up to a Hifonics amp 1200 watts @ 2 ohms and all I can say is damn. A few of my buddies swore it was at least a 12 in the trunk. I have a 1997 BMW 328i convertible and suprisingly with the top down it still has nice punch. It definately has a good range and i was able to fit it in a ported box suppled by this website even with the limited convertible trunk room. I also did some research and i read that people are wiring these subs between 1200 and 1500 watts so it can definately take a beating.

0 of 0 found this helpful

Help our customers find the most helpful reviews

chad

rensselaer, ny

Overall
Durability
Value
Features
Design
Usability

insane

February 11, 2011

I have one of these hooked up to an Alphasonik pma640hca amp brigded to 1ohm at 960rms and it hammers in my gti tuned to 34hertz. Best sub I ever owned out proformed vegas,jlw6&7 pioneer campion series. well only buy re's for now on

0 of 0 found this helpful

Help our customers find the most helpful reviews

Justin

Eden, Wi

Overall
Durability
Value
Features
Design
Usability

Worth it

January 27, 2011

I bought one of these and put it in a 1.7 cubic feet box with a 4" aero port and this thing goes low, I had a jl w3 15 and this thing goes lower and sounds better doing it. I would strongly recomend putting 1200-1500 watts rms to it because it takes it and has awesome sq.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Carlos

Santa Ana, California

Overall
Durability
Value
Features
Design
Usability

SUPERB SUBS!!!

January 18, 2011

I have 2 of these subs in my Lexus GS300 and powered by a bridged alphasonic 2 channel amp 1500 watts and OH MY GOD! The bass output is INCREDIBLE!!! Never felt low 's so deep from a sub b4! They sound awesome, loud and can take quite a beating all day long no problem! This subs will make ur music feel like ur at a concert all day long!! Just make sure u have the right box for these 'cause not just any box will do! The bass from these subs even make my eyes vibrate while driving! Scary huh! hahaha

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil.

Your Price $34.99

Single 10" Sealed MDF Subwoofer Enclosure

10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil.

Your Price $34.99

Single 10" Ported Enclosure Custom Black Baffle

Durable 3/4" Medium Density Fiberboard (MDF) construction.

Your Price $54.99

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $119.99

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.95

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $99.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $3.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $13.99

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

AutoSound 2000 CD-101

Low frequency test CD

Your Price $11.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 RE Audio SXX10D2 Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

2 RE Audio SXX10D2 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 RE Audio SXX10D2 Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

4 RE Audio SXX10D2 Subwoofers

2 Channel Amp

4 Channel Amp

Product Summary

Manufacturer

Model Number

SXX10D2

UPC

611892991163

Weight

25.50lbs

Internal SKU

sxx10d2

Internal Product ID

27316

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: RE Audio SXX10D2