Expert Service 1-877-289-7664 [Hours]

Early Black Friday Sale

RE Audio RE57FR

5" x 7" FR Series 2-Way Coaxial Car Speakers

In Stock
|

List price $132.98

You Save: $87.99 (66.17%)

$44.99

with warranty

Order within 31 hrs 54 mins to ship 11/24

Arrives by Monday, Dec. 1 to zip 07095

Add an Extended Warranty

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

In Stock

Arrives by Mon, Dec. 1

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

Get 25% off Sound Dampening Speaker Kit with Purchase!

For a limited time, get 25% off of the NVX SDSK2 Speaker Kit with a qualifying pair of speakers! Sound dampening will eliminate rattles, insulate against heat, and also improve the sound and output of your speakers!

3.75

27338

100

RE Audio RE57FR

$44.99

+

25% OFF

NVX SDSK2

$14.99

Special Price $11.24 ($14.99 if purchased separately)

NVX SDSK2

• Eliminates Road Noise
• Quiets Vibrations
• Stops Annoying Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Peel and Stick Installation
• Two 10" x 10" Pieces

(Offer 1 of 1)

Combined Total Price

$56.23

You Save $3.75

RE Audio FR Series

These astounding speakers are powerful, durable and stylish. Built with an in-line tweeter filter, both the mid-range and high frequency drivers will produce a wonderful sound that you and your passengers will enjoy. The sound these speakers produce is warm and pleasant, and will put it smile on anyone's face. The high quality materials used to build these speakers ensures a near-perfect, flat response that sounds just as the song artist intended. This high efficiency drivers will sound fantastic in your vehicle, and they are available at a very affordable price. RE has done it again, so consider the FR Series for your next high quality sound system.

Product Features:

  • 5" x 7" FR Series 2-Way Car Speakers
  • Power Handling:
    • Peak: 250 watts per pair / 125 watts each
    • RMS: 140 watts per pair / 70 watts each
    • Recommended RMS Per Speaker: 50-70 Watts
  • Black silk polyester diaphragm
  • Rubber surround
  • Silk, soft dome tweeter
  • Efficiency: 90 dB
  • Lowest Resonant Frequency: 100 Hz
  • Crossover Frequency: 4,500 Hz
  • Frequency Response: 55-20,000 Hz
  • Includes grilles
  • 4 ohms impedance
  • Top-mount depth: 2-1/2"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Pair

Product History:

RE Audio REX5.7 thumbnail
(newest, current model)
RE Audio RE57FR thumbnail
(previous model, replaced by RE Audio REX5.7)

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
5" x 7"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Soft Dome
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Silk
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Black Silk Polyester
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
125 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
70 watts
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
55 - 20,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-1/2"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches, required to contain the speaker.
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
4.7
Usability
5.0
Keebo

Nactown, TX

Overall
Durability
Value
Features
Design
Usability
great price

July 18, 2013

I got 2 sets of these for my f-150 and for just running off the factory head unit they sound excellent. The highs are crystal clear and scream pretty well. The mids can get a bit muddy but bass blockers, a quality amp with highpass crossover, or just turning down the bass in the eq will clear them up. Overall, i think they sound great for factory replacements and not breaking the bank. I also purchased the re dts 1000.1 mono block (discontinued model) and a re srx 10 duel 4 ohm sub to complete the sound these coaxial can't reach. I love the quality sound of my system and thanks sonic for the low pricing and fast shipping.

0 of 0 found this helpful

Help our customers find the most helpful reviews

bassmonster504

New Orleans, LA

Overall
Durability
Value
Features
Design
Usability
clean and clear

October 13, 2011

Definitely recommend theses speakers. for this price, they cant be beat. Ive had many different brands, and these are definitely the best. The tweeters are silk, making the sound clean as possible. They're amped at about 60 watts of clean, non-clipping power per speaker. They are very loud when they need to be, with no signs of distortion, im probably gonna buy the 6x9s next, and eventually the 6 1/2s. Great buy!

0 of 0 found this helpful

Help our customers find the most helpful reviews

rogggg1020

kingsport, tn

Overall
Durability
Value
Features
Design
Usability
great clarity

April 12, 2011

superb sound with just the head unit powering them for right now cant wait till i get the re amps for my re srx subs and the amp for these i just wished they would give a wider mounting plate there are about 1/16" all the way around gap on these for a 6x8 location im gonna fix this soon

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Items we think you might want
ONX157 thumbnail
MB Quart ONX157

• RMS: 100 watts Per Pair / 50 watts Each
• Gloss Piano Black Polypropylene Cone
• 30mm WideSphere Titanium Dome Tweeter

Your Price $43.95

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

RE57FR

UPC

611892990623

Weight

4.80lbs

Internal SKU

re57fr

Internal Product ID

27338

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: RE Audio RE57FR