Expert Service 1-877-289-7664 [Hours]


Did you know that we price match?

It is important that you always get the best price. Call us at 1-877-289-7664 for our best price on this item or check out our coupons page for great deals!

VIBE Audio Lite Air 6 V1 (LITEA6-V1)

6-1/2" Lite Air V1 Series 2-Way Component Speakers System


We apologize

This item has been discontinued

Item Added to Cart

VIBE Audio Lite Air 6 V1 (LITEA6-V1)

6-1/2" Lite Air V1 Series 2-Way Component Speakers System


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection

NVX 25 ft. of True Spec 16 Gauge Speaker Wire

100% OFC wire with a noise eliminating twisted-pair technology to provide crystal clear sound.


Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.


NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!



Don't see the accessory you're looking for?
View all available accessories for the VIBE Audio Lite Air 6 V1 (LITEA6-V1).

Get FAST answers from customers ASK a Question See questions answers

Shallow Mount meet Sound Quality:

For those that have a difficult time finding the perfect shallow mount speaker, the Vibe Audio Lite Air 6 is for you. This component speaker set includes a 6-1/2" woofer and a 3/4" silk dome tweeter. In-line to the speakers is a separate crossover that will accurately filter the sound frequencies so that the drivers are only receiving the frequencies that they are designed for. The result is cleaner sound that won’t damage the speakers over time. It means a long lasting and great sounding car speaker. The woofer cone is a stand out feature on these drivers. A woven fiberglass Kevlar cone is rigid and helps retain the high-end sound that these speakers produce.

Vibe Audio Lite Air Speakers

A Fit for Any Vehicle:

Next to the breath-taking sound quality, the area where these speakers shine the most is in the slim mounting depth. At first listen, you would not expect these speakers to only have a 1-7/8” mounting depth. Supported by an alloy torsion basket and strengthened by a powerful neodymium magnet, the speakers retain strength and magnetic integrity. The use of these higher end materials doesn't mean the the price is raised either. All this shallow technology and high end materials are used, yet the price is reasonable for everyone. The shallow mounting depth enables a wider range of cars that will accommodate these speaker, however that does not mean that they are only used in shallow applications. These Vibe Audio Lite Air 6 speakers are perfect for any installation where quality speakers are needed.

Lite Air Speaker Specifications:

  • 6-1/2" Lite Air Series 2-Way Shallow Mount Car Component System
  • Power Handling:
    • Peak: 600 watts per set / 300 watts each side
    • RMS: 200 watts per set / 100 watts each side
    • Minimum: 100 watts per set / 50 watts each side
  • Kevlar cone woven with fiberglass
  • Polyurethane surround
  • 3/4" Silk dome tweeter for smooth high frequency response
  • ABS Gasket holds the speaker grill in place
  • Single spider structure assists the linearity of the woofer cone
  • Alloy torsion basket for strength and thermal power handling
  • Screw-set terminals holds heavy gauge speaker wire secure
  • Speed bass provides an extended low frequency response
  • Separate crossover networks for advanced sound filtering
  • Includes speaker grilles
  • 4 ohms impedance
  • 1" High temperature voice coil
  • 0.6 oz. Neodymium magnet structure with N35 magnet rating
  • Top-mount depth: 1-7/8"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

Speaker Specifications

This is the manufacturer product line of speakers.
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Woven Kevlar and Glass Fiber Composite
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
100 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
50 watts
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
84 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
60 - 25,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches, required to contain the speaker.
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
5-3/8" x 5-3/8" 
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Number of Speakers
This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

Please refer to the product image and description for further details about the speaker.

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating



1st VIBE experience

December 26, 2011

Fed by a Soundstream Stealth 160wrms per channel, these sound pretty nice. Great value for the money! They are very thin, and I was concerned that they would be weak, but they sound every bit as good as my old MB quarts (which cost several times the $$). The midrange/midbass is impressive, and the tweeter is fairly smooth.

4 Stars for durability because
1. One midrange magnet straight FELL OFF. It was easy to epoxy it back in place, but somewhat alarming. SQ was unaffected, thankfully.
2. The mounting screws are lowest bidder china made items, they are the softest materiel ever, and two of them broke while threading them into pre-drilled holes.

7 of 9 found this helpful

Was this review helpful to you?


Bronx N.Y.

sounds good

December 4, 2011

Replaced a set of infinity reference comps in my rear doors. I blew one of my tweeters on the infinity's so for $59 I couldn't lose. While instaling the comps the magnet assembly of the midrange fell off (its glued on). I decided to use the vibe tweeters and xovers with the infinity mids. The vibe audio tweeters sound better than the infinitys, but the vibe audio mids definitely do not compare. I tested the remaining vibe mid up against the reference mids and there is no comparison they bottom out xovere'd at 80 hz 24db /oct at about 75 watts while the infinitys take the full 125 watts rms my infinity kappa 4 pushes. overall the tweeters are worth the price. They're very efficient and sound smooth, I needed to fade to the front because I was hearing the rear comps over the the pg rsdc 6.5 comps I have in front. On a side note there isn't any tweeter attenuation but so far they blend very well with the rest of my system.

7 of 10 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 16 Gauge Speaker Wire

100% OFC wire with a noise eliminating twisted-pair technology to provide crystal clear sound.

Your Price $15.99

Streetwires 50 ft. of True Spec 16 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $29.99

Belva 23 ft. of True Spec 16 Gauge Speaker Wire

100% Copper Clad Aluminum, PVC blended jacket for easy installation and high strand count for maximum audio quality

Your Price $12.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

NVX XTGSP2 Tone Generator and Speaker Polarity Tester

Perfect for safely troubleshooting and testing audio systems

Your Price $29.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $8.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $19.33

Encore Universal Four Door Power Door Lock Kit

Add Power Door Locking and Unlocking while you have the Door Panels removed

Your Price $29.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $10.99

NVX Sound Dampening Rubber Roller

Install your Sound Dampening with ease using this heavy duty rubber roller!

Your Price $7.99

Speaker Baffles for your Speakers

Enhance the sound of your speakers with these easy to install speaker baffles.

Your Price $9.99

XTC 6-1/2" Round Large Frame, Shallow Foam Speaker Baffles

Creates a tight seal behind speaker for enhanced audio quality.

Your Price $15.97

16-14 AWG Butt Connectors

These blue butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers!

Your Price $4.49

16-14 AWG Blue T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $2.58

16-14 AWG Quick Disconnect Connectors

These blue quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $13.26

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary


Model Number






Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: VIBE Audio Lite Air 6 V1 (LITEA6-V1)