4 Gauge Complete Amplifier Installation Kit with 4 Channel RCA Interconnect Cables
4 Gauge Complete Amplifier Installation Kit • Includes 4-Channel RCA Interconnect Cables • Designed for Systems up to 1500W • Premium Power and Ground Wire • Made from Copper-Clad Aluminum
Learn more about the ispkbl44chNote: Although the manufacturer states this kit as being 4 gauge, we believe the actual thickness of the power wire to be smaller than 4 gauge.
Internal Product ID:
28415
Good for when you're on a budget.
I would recommend for low-powered systems as it's really just 8awg wire.
12
found this helpful.Spend More
This product does not look like in the pictures
-RCA are all dark neon blue with bulky black plastic plugs
-Speaker wire blue and about 14-16 gauge wire very thin
-Power/Ground cable are about 6 gauge
-Remote wire blue and very thin 18-20 gauge
-Ring terminals ok
I bought this and was unsatisfied cheap looking RCA thin wire that an amp would smoke
I bough hiltron wire 12 ga that's really a 14 ga works perfect
Only liked the blue and white covers
Power/Ground cable ok for use.
SPEND MORE ..YOU GET WHAT YOU PAY FOR
8
found this helpful.Great Kit
The kit came with everything I needed to install my amp. Easy to use and everything looked great after it was installed. Looked at many other kits, but this one was by far the best value.
8
found this helpful.Great Product! At a Great Price!
This product does exactly what you need it to do. Its easy to you use and has all the connections you need to hook up your amp. Only thing that i would buy that doesn't come with this kit that you might need is a wire crimp and small connections for your speakers.
8
found this helpful.so-so
Actually seems to be about 6 gauge wiring, but honestly the power and ground seem really nice, and also are easy to bend and work with especially considering it's cheaper than almost any 8 gauge kit. Fuse holder was also up to par. The RCAs however are junk. They are not anything similar to the ones in the picture and I'm going to have to replace them because even running them down the opposite side of the car from the pwr/ground/turn-on they are still picking up a large amount of noise. That's actually the reason I picked this kit was for the included 4-channel RCAs. Live and learn I guess. Also the turn-on lead was extremely thin, be careful with it.
8
found this helpful.good set for not a lot of money
A great 4awg wire set for not a ton of money. good quality and a good fuse block
9
found this helpful.Poor Quality
First kit I bought from raptor and the Last!
Power / ground cable
-Thick coating 6 ga wire
-bulky hard to run during install
Speaker wire
- neon blue coating looks nice
- CCA & 18GA
RCA Cables
- ugly bulky black ends w neon blue coating
-lots of static from power cable (ran opposite side of rcas)
-Fuse holder is a joke came apart several times
I ended up replacing everything but the power cables but will be doing so in the future
Speaker wire -12ga Hiltron OFC
RCA - streetwire zero noise
Fuse - Scorche 0 ga distribution block 2* 4ga outlets
W/ Tsunami fuses
7
found this helpful.Great vallue
I would recommend this kit for regular sound system upgrade.
7
found this helpful.Not too bad, but not what was advertised
The power wire has 583 strands that are 0.006" thick, which makes it 7.0 gage. The speaker wire has 50 strands that are 0.006" thick, which works out to 17.6 gauge. Both the power wires and speaker wires are copper clad aluminum, not 100% oxygen free copper.
I'm still going to use it, but am sad that the wire is not all copper.
8
found this helpful.Smh
It's got thick plastic and not a lot of wire in the middle. This is 8 gauge wire. couldn't use because its too cheap.
6
found this helpful.Best selling similar products