Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Kicker 04S10L72

2 ohms DVC 10" L7 Solo-Baric Subwoofer S10L7 S10L72

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

06s10l72 thumbnail

Kicker 06S10L72 Solo-Baric L7 Series

OUR PRICE: $209.07

View item
  • dual 2 ohm voice coils for wiring flexibility (with a compatible amp)
  • aluminum deposit cone -- a beautiful look with less cone flex and less distortion
  • rear-cone brace for added strength to reduce cone flex under stress
  • Santoprene rubber surround
  • Massive surround radius provides increased excursion for low bass output and higher SPL
  • BAM (Basket and Motor) Enhanced Assembly: new for 2004 -- cast aluminum basket featuring low profile/open design that provides a solid anti-resonant foundation for the motor assembly
  • Perimeter venting which relieves pressure for a more linear response and aids in keeping the voice coils cool
  • Patent Pending Stitched Surround that aids in preventing cone/surround separation at high excursions
  • Sleeved high-power tinsel lead wires to resist lead breakage
  • Spring-loaded nickel plated terminals for solid connections with large gauge speaker wire
  • Authorized Internet Dealer

Product History:

Kicker 11S10L72 thumbnail
(newest, current model)
Kicker 08S10L72 thumbnail
(previous model, replaced by Kicker Solo-Baric S10L72 (11S10L72))
Kicker 06S10L72 thumbnail
(previous model, replaced by Kicker Solo-Baric S10L72 (08S10L72))
Kicker 04S10L72 thumbnail
(previous model, replaced by Kicker 06S10L72 Solo-Baric L7 Series)
Kicker S10L72 thumbnail
(previous model, replaced by Kicker 04S10L72)

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1200 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
600 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
24 - 100 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85.6 dB
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber

Recommended Enclosure Specifications

Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6-3/16"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-7/16"

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
80%
4 Star
20%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
4.6
Features
4.6
Design
4.6
Usability
4.4

Ryan

wimauma

Overall
Durability
Value
Features
Design
Usability

loud as it gets

January 10, 2010

extremely heavy ,huge magnets,power hogg, LOUD bass,virtually indestructible,great look,pricey but well worth it make your friends deaf and jealous,buy it,

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jose

Chicago, IL

Overall
Durability
Value
Features
Design
Usability

DA BEST SUBWOOFER FOLKKS

October 19, 2006

This is definately the best subwoofer I have owned. This kicker subwoofer is very dependable. It has incredible deep bass. It rattles everything in my car. You just need a very good amp that gives it a huge 1200 Watt rms for 2 of these. Monster Sub. I recommend to everyone!

0 of 0 found this helpful

Help our customers find the most helpful reviews

enrique

Oakland, CA

Overall
Durability
Value
Features
Design
Usability

Great subwoofer

April 13, 2006

I have two of these kicker L7 in a truck box hooked up to an audiobahn amp. these are probably the loudest speakers you will find to put in a truck box. These subs are ridiculously loud for the tiny box i have in the back of my truck. people cant believe that i only have two 10's. they think i have 4 12's because of how loud it is. but over all if your looking for some competion subs go for the kicker L7 because there very dependable and extremely loud.

0 of 0 found this helpful

Help our customers find the most helpful reviews

John

Yukon, OK

Overall
Durability
Value
Features
Design
Usability

150+dB

January 22, 2006

if you want to hit 150+db just get 2 of these, and at least a 500 watt amp. it will do wonders.

0 of 0 found this helpful

Help our customers find the most helpful reviews

william

sycamore, GA

Overall
Durability
Value
Features
Design
Usability

super subs

June 15, 2005

if you want a great sub here it is

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

20 Ft. of Kicker 12 Gauge Speaker Wire

Get true gauge Kicker speaker wire to match your Kicker subwoofer!

Your Price $34.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $119.99

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.95

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $89.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $3.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

AutoSound 2000 CD-101

Low frequency test CD

Your Price $11.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 Kicker 04S10L72 Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

2 Kicker 04S10L72 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 Kicker 04S10L72 Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

4 Kicker 04S10L72 Subwoofers

2 Channel Amp

4 Channel Amp

Product Summary

Manufacturer

Model Number

04S10L72

UPC

713034017660

Weight

20.50lbs

Internal SKU

04s10l72

Internal Product ID

2844

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker 04S10L72