• 12" Dual 4 Ohm CompVR Series Subwoofer
• Power Handling:
• Peak: 800 watts
• RMS: 400 watts
• Impedance: Dual 4 ohms
• Inverted Structural Dome Polymineral Injection Molded Cone: Remains rigid, and lowers distortion
• Rear Cone Brace: Offers unmatched strength and resistance to deformation
• Ribbed Santoprene Surround for Linear Cone Motion
• Silver-Coated Stamped Steel Basket
• Stitched Surround: Ensures the cone and surround won't separate, even under the highest loads
• High-temp Polyimide Film Voice Coil Former
• Dual Ultra-Length Voice Coils
• Perimeter Venting
• Sleeved High-Power Tinsel Lead Wires
• Spring Loaded Nickel-Plated Terminals
• Other search terms: CVR12 4 ohms, CVR124, 07CVR12, 07CVR124, 07CVR 12" 4 ohm, CompVR 12", CVR 12", Comp VR 12"
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

• Formula Series Monoblock Car Amplifier
• RMS Power Rating:
  • 4 ohms: 250 watts x 1 chan.
  • 2 ohms: 500 watts x 1 chan.
  • 1 ohm: 1000 watts x 1 chan.
• PWM (Pulse Width Modulated) MOSFET power supply
• MB QR-2 Wired remote bass level control included
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +9 dB bass boost at 45 Hz
• Mono channel operation
• Dual speaker terminals simplify the hookup of multiple speakers
• Preamp RCA outputs to daisy chain multiple amps
• 4-Way System Protection circuitry (DC, thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy convection heatsink for superb heat dissipation
• Silver-plated RCA level inputs
• Silver-plated screw terminals
• Input sensitivity:
  • Low level: 200mV-6V
• Signal to noise ratio: 95dB
• Channel separation: 85dB
• Variable low-pass filter: 40-300 Hz
• Subsonic filter: 10-40 Hz
• Damping factor: >200
• Frequency response: 10-300 Hz
• Dimensions: 19-4/10"L x 9-1/2"W x 2-1/4"H
• 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

General Features:

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Designed specifically for car audio systems up to 1000 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Red 4 gauge power wire
2. 3 ft. (.91 meters) Black 4 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) Speaker cable
6. One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. One 4 Gauge red chrome plated ring terminals
9. One 4 Gauge black chrome plated ring terminal
10. Three 18 Gauge red Spade terminal
11. Two 18 Gauge black Spade terminal
12. One 18 Gauge red butt connector
13. Ten 4" Black zip ties

General Features:

• Dual Sealed 12" Enclosure
• Internal box volume: 2.46 cubic ft. total air space - 1.23 cubic ft. per chamber.
• High Quality 3/4" MDF Construction
• Durable black carpeting
• Pre-lined with Poly-Fil
• Seams are fully caulked for better efficiency
• 2 Separate chambers allowing each subwoofer its own air space
• Gold post terminals for clean and easy wiring access
• Box Dimensions: 28-1/2"L x 14-1/4"D x 14-1/4"H
• 30 Day return policy