Garage
Shop

3000W Complete JL Audio + Alpine Bass Package

JL Audio J21000.1 Amplifier + 2 Alpine SWR-1042D Type-R 10" Subs + 1/0 GA Amp Kit + Sealed Sub Box

JL Audio
Shop all JL Audio
EXCLUSIVE
Product videos
highlight-star-icon

Bass Package: JL Audio J21000.1 Monoblock Amplifier + 2 Alpine SWR1042D 10" Subwoofers + Tsunami 1/0 Gauge Amp Kit + Absolute Dual 10" Sub Enclosure • Includes Everything You Need To Add Bass To Your Car

Learn more about the j210001_2-swr1042d

We apologize

This item has been discontinued

Product Highlights


Bass Package: JL Audio J21000.1 Monoblock Amplifier + 2 Alpine SWR1042D 10" Subwoofers + Tsunami 1/0 Gauge Amp Kit + Absolute Dual 10" Sub Enclosure • Includes Everything You Need To Add Bass To Your Car

Description


JL Audio brand icon

Authorized dealer

Sonic Electronix Exclusive Bass Package

This combo package includes two Alpine Type-R Series 10" Subwoofers and a JL Audio Class D J2 Series Amplifier. This monoblock amplifier is a perfect match for the 10" subwoofers when wired at 1 ohm. The Alpine subwoofers feature a kevlar reinforced pulp cone with HAMR surrounds and a concealed mount gasket. The amplifier is equipped with power and protection LED indicators and includes a gain remote control. This exclusive package also includes an Absolute sealed dual 10" sub enclosure and a Tsunami 1/0 gauge amplifier kit to make all the necessary power connections. Sonic Electronix is the only place you will find this perfectly matched combo.

JL Audio Amplifier Features
  • J2 Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 400 watts x 1 chan.
    • 2 ohms: 700 watts x 1 chan.
    • 1 ohm: 1000 watts x 1 chan.
  • MOSFET power supply
  • Remote gain control included
  • Power and protection LED indicators
  • Single-band adjustable 0-12 dB bass EQ with 45 Hz center frequency
  • High-level and low-level (RCA-jack) inputs
  • Speaker outputs
  • Preamp RCA outputs
  • Silver-plated RCA level inputs
  • Silver-plated screw terminals
  • Input sensitivity can be used to match the unit's output voltage to the input stage of each amplifier channel
  • Outer casing is designed to remove heat from the circuitry
  • 12dB/octave low-pass active filter
  • Variable low-pass filter (40-300 Hz)
  • Frequency response: 10-160 Hz
  • Dimensions: 14.6"L x 9.6"W x 2.15"H
  • 1-year Sonic Electronix warranty
Alpine Subwoofer Features
  • Two 10" Dual 4 Ohm Type-R Series Subwoofers
  • Power Handling:
    • Peak: 3000 watts total / 1500 watts each
    • RMS: 1000 watts total / 500 watts each
  • Impedance: Dual 4 ohms
  • Kevlar reinforced pulp cone
  • Custom Cast Aluminum Frame with Integrated Perimeter Venting and Heat Transfer Plate
  • Mirrored Progressive Nomex ® Spiders with Reinforced Layer Integrated Tinsel Leads
  • Compound Radius Curve (CRC) Motor Structure
  • Multi-Stage Thermal Management System
  • HAMR Surround and Concealed Mount Gasket
  • Aluminum Airflow Motor Cover
  • Insert Push Terminals with One-sided Layout
  • Bumped Backplate
  • Compound Radius Curve Pole Geometry
  • Dual Stacked Magnets
  • Extra Length Extended Pole
  • Flared Pole Vent
  • High Strength Brass Voice Coil Bobbin
  • Magnetically Optimized Motor Structure (Pat. Pend.)
  • Oversized Parabolic Dustcap
  • Frequency Response: 26Hz – 500Hz
  • Designed and Engineered in the USA
  • 1-year SonicElectronix.com warranty
Absolute Subwoofer Enclosure Features
  • Dual 10" Universal Sealed Subwoofer Enclosure
  • Hold two ten inch subwoofers
  • Pre-lined with polyfil for deeper bass
  • Two sets of rear binding posts
  • Terminals are banana clip ready
  • Covered in durable black carpet
  • Made from 3/4" MDF (Medium Density Fiberboard)
  • Subwoofer mounting depth: 10-1/4"
  • Subwoofer cutout diameter: 9-1/4"
  • Box volume: 0.78 cubic feet (per chamber)
  • Total box volume: 1.56 cubic feet
  • Dimensions: 10"TD x 14"BD x 27"W x 12"H
  • Authorized Internet Dealer
Tsunami Amplifier Kit Features
  • 1/0 Gauge Performance Amplifier Installation Kit
  • Rated for systems up to 3500 watts
  • Designed for the connection of a single amplifier
  • Kit includes all cables and parts needed for installing a high power amplifier
  • Primary power cable has semi-translucent insulation
  • Fuseholder is clear plastic and wears its fuse to the side of the product
  • Authorized Internet Dealer
Amp Kit Includes:
  1. 17' 1/0 Gauge Blue Power Cable
  2. 3' 1/0 Gauge Silver Ground Cable
  3. 17' 18 Gauge Blue Remote Turn-on Wire
  4. 1/0 Gauge 1 Position ANL Fuseholder
  5. 250 Amp ANL Fuse
  6. Two 1/0 Gauge to 5/16” Nickel-Plated Ring Terminals
  7. Blue and Silver Insulators
  8. Heavy Duty 1/0 Ga to 5/16” Nickel-Plated Ring Terminal
  9. Clear Insulator
  10. Heavy Duty Nickel-plated Ground Terminal
  11. Ten 6” Cable Ties
  12. Six #8 x 3/4” Phillips Nickel-Plated Panhead Screws
  13. Two Red Vinyl #10 Nickel-Plated Spade Terminals
  14. 2 Blue Vinyl Butt Connectors
  15. 1/0 Gauge Snap Grommet

Specifications & Details


Full Range Amplifier Power Specifications
RMS Power @ 4 ohms
400 watts x 1 channel
RMS Power @ 2 ohms
700 watts x 1 channel
RMS Power @ 1 ohm
1000 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Maximum Input Gauge Size
4 AWG
THD at Rated RMS Power
.01%
Speaker Level Inputs
Yes
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
40 - 300 Hz
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fuse Rating
35A x 3 
Subwoofer Specifications
Subwoofer Size
10"
RMS Power Handling
500 watts
Total RMS Power Handling
1000 watts
Peak Power Handling
1500 watts
Total Peak Power Handling
3000 watts
Woofer Surround
HAMR Rubber Surround
Woofer Composition
Kevlar Reinforced Pulp Paper
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
4 ohms
Sensitivity
83 dB
Frequency Response
26 - 600 Hz
Enclosure Specifications
Box Type
Sealed
Number of Subwoofers
2
Box Style/Shape
Hatchback Style, Angled Back
Height
12"
Width
27"
Depth
10"
Second Width
14"
Wood Thickness
3/4"
Number of Terminals
2
Terminal Type
Binding posts (banana clip ready)
Box Exterior Color
Black
Box Finish
Carpet
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

J2-1000.1_2-SWR-1042D

Weight:

102.20lbs

Internal SKU:

j210001_2-swr1042d

Internal Product ID:

29609

Product and How-to Videos


  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Add-ons


Related Searches


J2-1000.1_2-SWR-1042D small

Item added to your cart.

Price: $784.91

Essential add-ons
Belva BAK42

Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

$59.99

$34.99

Add to cart
NVX XKIT42

100% Copper, 2-Chan. True Spec 4 Gauge Amp Installation Kit

$114.99

$99.99

Add to cart
NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$89.99

$59.99

Add to cart
Dynamat Xtreme 20' Trunk Kit 19405

20 ft. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces

$236.95

$149.95

Add to cart
Boom Mat Damping Material (050210)

20.8 sq.ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm )

$145.81

$119.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon