Garage
Shop

Sony XM-ZR1252 + Amplifier Kit

800W Max, 2-Channel ZR Series Power Amplifier (XMZR1252) w/ 8 Gauge Amplifier Kit

Sony
Shop all Sony
Product videos
highlight-star-icon

ZR Series Power Amplifier • 2-Channel • 125W RMS x 2 Chan. @ 4 Ohms • 170W RMS x 2 Chan. @ 2 Ohms • 800W Max • High-Level Sensing Power On Feature • Gold Plated Speaker Terminals • Includes a 8 Gauge Amplifier Kit

Learn more about the xmzr1252_ispkbl8bg

We apologize

This item has been discontinued

Product Highlights


ZR Series Power Amplifier • 2-Channel • 125W RMS x 2 Chan. @ 4 Ohms • 170W RMS x 2 Chan. @ 2 Ohms • 800W Max • High-Level Sensing Power On Feature • Gold Plated Speaker Terminals • Includes a 8 Gauge Amplifier Kit

Description


Sony brand icon

Authorized dealer

Sony XM-ZR1252 Features:
  • ZR Series 2-Channel Power Amplifier
  • RMS Power Rating:
    • 4 ohms: 125 watts x 2 chan.
    • 2 ohms: 170 watts x 2 chan.
    • Bridged, 4 ohms: 340 watts x 1 chan.
  • Max power output: 800 watts
  • Pulse power supply
  • OTL (output transformerless circuit) circuit
  • LED power/protection indicator
  • Bass Boost (0-10 dB at 40 Hz)
  • High-level sensing power on feature
  • RCA inputs
  • Gold plated speaker terminals
  • High level input connector
  • Speaker terminal outputs
  • High-pass filter (80 Hz, 12 dB/octave)
  • Low-pass filter (80 Hz, 18 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 5-50,000 Hz
  • Dimensions: 15-5/8L x 10-1/8W x 2-3/4H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year SonicElectronix.com warranty
Amplifier Kit Features:
  • Amplifier Installation Kit with RCA Interconnect Cable
  • 8 Gauge (AWG) Power and ground cable for excellent power transfer
  • Designed for systems up to 1000W
  • Comes with everything needed to install an amplifier
  • RCA Interconnect cables use twisted pair construction for optimal signal transfer with low noise interference
  • Speaker cable is easy to install with clean and clear sound
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Amplifier Kit Includes:
  1. 17 ft. of 8 Gauge blue power cable
  2. 3 ft. 8 Gauge black ground cable
  3. 17 ft. Neon blue series RCA cable
  4. 16 ft. of Premium speaker cable
  5. 17 ft. of 18 Gauge blue remote turn-on wire
  6. 6 ft. Split loom tubing
  7. 1 AGU Fuse Holder
  8. 50 AMP Fuse
  9. All Necessary Hardware for Installation

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
125 watts x 2 channel
RMS Power @ 2 ohms
170 watts x 2 channel
Bridged RMS Power
340 watts x 1 channel
Peak Power Output
800 watts x 1 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
2-Channel
Total Peak Power Output
800 watts
Total RMS Power Output
340 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
.04%
Speaker Level Inputs
Yes
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
N/A - 80 Hz
Low-Pass Crossover Frequency
N/A - 80 Hz
Signal-to-Noise Ratio
93 dB
Bass Boost
0 - 10 dB
Remote bass/level controller
No
Fan Cooled
No
Fuse Rating
25A x 2 
CEA-2031 Compliant
Yes
Amplifier Kit Specifications
Number of Amplifiers Supported
1
Power/Ground Wire Size
8 gauge
Power Wire Length
17 feet
Ground Wire Length
3 feet
Speaker Wire Included
Yes
Speaker Wire Length
16 feet
Remote Wire Length
17 feet
Interconnect (RCA) Signal Cables Included
2 Channel
Fuse Holder
AGU
Fuse Size
50A
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

XM-ZR1252_ISPKBL8-BG

Weight:

14.00lbs

Internal SKU:

xmzr1252_ispkbl8bg

Internal Product ID:

29614

Product and How-to Videos


Customer Ratings & Reviews



5 star
53%
4 star
29%
3 star
15%
2 star
0%
1 star
3%



Durability
4.3
Value
4.4
Features
4
Design
4.4
Usability
4.6

Customer Reviews

Sort by:

Loading...

This amp can take a beating.

The following review is for XM-ZR1252, which is a part of the bundle you are viewing.

I've got this baby wired to two 10" Kicker CompVR (800W RMS and 1600W MAX combined!). They're wired at 2-ohms in bridge and let me tell you, this amp can push them!

By Dude on December 28, 2009

14

found this helpful.

Very nice sub

The following review is for XM-ZR1252, which is a part of the bundle you are viewing.

First off i must say that shipping took forever. As far as the amp goes its really good. Have it pushing two 12" kicker comps and they're really slamming. I heard bad things about Sony car audio stuff so i took a risk with getting this amp. It was well worth it, gives my subs some clean, rich, deep bass. I would definitely recommended this product!

By BigR on August 3, 2010

11

found this helpful.

Not a bad amp if you're on a budget.

The following review is for XM-ZR1252, which is a part of the bundle you are viewing.

I bought this amp in May 2009. I mainly got it to power a 10" Kenwood KFC-2511 300W RMS 4-ohm Subwoofer and it overpowered it quite easily in bridged mode. I blew the first one within 24 hours, but I didn't know how to properly tune the amp and went back and exchanged it for a new subwoofer. It then powered two Kenwood KFC-2506's wired in 8-ohms and this this pounds. I'm buying a new amp and subs, so this will go into my other car. Great amp if you're on a budget.

By Cheese Ball on December 21, 2009

9

found this helpful.

Good Product

The following review is for ISPKBL8-BG, which is a part of the bundle you are viewing.

Used this package on my Mazda 6 i Sport and it covered the length of the car fine. Had scrap to splice off onto multiple amps.

By NETech on November 14, 2011

8

found this helpful.

Comes with everything you need at a great price!

The following review is for ISPKBL8-BG, which is a part of the bundle you are viewing.

I ordered this kit for my two 12" mtx subs and a one channel amp and it came with all of the wiring necessary to gets my subs bumping

By Luke on August 23, 2010

8

found this helpful.

its ok

The following review is for XM-ZR1252, which is a part of the bundle you are viewing.

i bought this amp somewhere else and i have 2 12" pioneer ts-w302r subs at 2 ohms and this amp pushes them very well, but the down fall is that it gets hot very quickly and it shuts off after playing for 20 minutes and the amp is only turned half way up, so this amp will be ok if you play it for a couple minutes but i would not recommend this amp to anyone.

By spudd on March 23, 2010

8

found this helpful.

Great Value

The following review is for ISPKBL8-BG, which is a part of the bundle you are viewing.

I shopped around but couldn't beat the deal I got from Sonic Electronix on this Raptor cable set for connecting my subwoofer.

By Mike on May 30, 2011

6

found this helpful.

Great product

The following review is for ISPKBL8-BG, which is a part of the bundle you are viewing.

I used this kit for one Alpine Type R 12 with an MRP-M500 amp and it works perfectly! I don't know if it's true 8 gauge, but I'm sure it's not more than 10 gauge. Been using it for a month and haven't had any problems.

By Alex on January 4, 2011

6

found this helpful.

Great Amp For me

The following review is for XM-ZR1252, which is a part of the bundle you are viewing.

I have used this amp for over three years, I had it pushing two Rockford Fosgate P2s, pushed them verrryy nice, did shut off like twice, After those 12s were stolen :/, I had it pushing a 12" Rockford P3, which is worked soo good, never shut off, or overheated. Now I have it, yes a 800 watt amp, pushing three 12" kicker comps. Pushed very well. It does get hot, but hasn't cut off. Great amp for the price.

By Chad on April 20, 2010

6

found this helpful.

Nice low-priced amp

The following review is for XM-ZR1252, which is a part of the bundle you are viewing.

Surprisingly good sound and power quality for a Sony. Bought this amplifier in a hurry before one of my car shows installed it to run my interior speakers that was over a year ago I never had ANY issues with it at all

By TekGyrl on December 19, 2009

7

found this helpful.

Add-ons


Similar Products

Best selling similar products

JL Audio XD200/2v2

• 75 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier

(6)

$199.99

Taramps DS 800x2

• 250 watts x 2 channel @ 4 ohms
• 400 watts x 2 channel @ 2 ohms
• Bridged: 800 watts x 1 channel @ 4 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 2-Channel-Channel Amplifier

$224.00

Hertz HCP2

• 65 Watts RMS x 2 @ 4 ohms
• 100 Watts RMS x 2 @ 2 ohms
• CEA-2006 Compliant
• Refined Heatsink with High Convection Capability
• Automatic Remote Turn-On/Off function
• Dimensions: 8.46" x 7.48" x 1.97"

$199.99

Hertz DPower 4

• 50 watts x 4 channel @ 4 ohms
• 65 watts x 4 channel @ 2 ohms
• Bridged: 130 watts x 2 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class D 2 ohms Stable 4-Channel Amplifier

$279.99

Rockford Fosgate M2-200X2

• 50 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier

$219.99

Related Searches


XM-ZR1252_ISPKBL8-BG small

Item added to your cart.

Price: $103.90

Essential add-ons
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$114.99

$99.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon