Expert Service 1-877-289-7664 [Hours]

Fall Blow Out Dot Sale

Audix M1250B

Miniature Cardioid Condenser Microphone

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Audix M1250B

The M1250B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1250B, which is equipped with a cardioid capsule, is also available with hypercardioid, omni or shotgun capsules, giving the microphone the unique ability to be used in a wide variety of live, studio and broadcast applications.

The M1250B is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.

Product Features

  • Miniaturized Condenser Microphone
  • Can be used in applications such as a live, studio, speech, presentation, and broadcast
  • Overhead design for use with choir or group vocals
  • Works well with acoustic instruments and percussion
  • Cardioid polar pattern allows for distinguished unwanted noise rejection
  • Equipped with cardioid capsule
  • Small, lightweight, and low profile
  • Miniaturized integrated preamp circuitry
  • No external power adapter needed
  • 12mm Gold vapor diaphragm
  • Immune to RF interference
  • Extremely low noise, high SPL handling
  • Allows for ambient room miking
  • Frequency Response: 50-19,000 Hz
  • Sensitivity: @1k 10 mV/Pa
  • Output Impedance: 150 ohms
  • 1-year Manufacturer's warranty

Microphone Specifications

Microphone Type
This is the type of microphone included with the purchase of the item.

Wireless:All of these microphones can be used without the necessity of wires or cables to connect them. They usually come with a receiver that connects to the input device where the audio signal is being sent.

Shotgun: These microphones are suspended on a boom and are used primarily in video production and broadcasting.

Lavaliere: These microphones are clipped on to the lapel or tie of the talent for broadcast and video production audio.

Table Top: These microphones are designed with a built in stand or to be placed on a table top stand to be used for broadcasting and podcasting applications.

Headset: These microphones are to be worn on the head typically for live performance and theater production.

Handheld: These microphones are held in the hand and are used in a wide range of applications primarily vocals and public address.

Clamp On: These microphones attach directly on to an instrument.

Drum Package: These microphones are an all in one package for drums typically made of dynamic Kick, Snare, Tom, and a stereo condenser pair of overhead mics for Cymbals.

Instrument
Designed Applications
The intended application the microphone is designed for.
Acoustic Guitar
Instruments
Number of Microphones
This is the number of microphones that are included in the package.
1
Polar Patterns
The polar pattern of a microphone determines how sensitive it is to receiving sounds as they arrive at different angles.
Cardioid
Transducer Type
The transducer type is the manner in which the audio signal is converted into an electrical signal.
Condenser
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
50 - 19,000 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
73 dB
Maximum Sound Pressure Level
This is the maximum sound pressure level that the microphone is capable of accepting and transferring into an electrical signal.
140 dB
Output Impedance
This is the amount of impedance that the microphone allows.
150 ohms
Connection Type
This is the manner in which the microphone connects to the source unit. For wired microphones, this is the connector that directly connects the microphone to the mixer (or other input source unit). For wireless microphones, this is the connection that connects the microphones receiver to the mixer (or other input source unit).
3 pin mini-XLRm

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

M1250B

UPC

687471291610

Weight

1.20lbs

Internal SKU

m1250b

Internal Product ID

30829

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Audix M1250B

  • USB Microphones | Recording Made Easy w/ USB Mics
  • Ribbon Microphones Explained | How They Work & When to Use