Expert Service 1-877-289-7664 [Hours]

Call in for Black Friday Deals

CAD PMP54

5-piece Percussion Microphone Pack

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

CAD PMP54

The CAD PMP54 is a low cost, five-piece drum, percussion and instrument microphone kit. The kit features (4) TSM411 supercardioid microphones and (1) KBM412 microphone with extended low frequency response. The kit is ideal for capturing drum kits, percussion instruments, keyboard and guitar cabinets, etc. The PMP54 kit will perform well in live sound reinforcement and recording applications.

TSM411 Specifications:

  • Operating Principle: Moving coil dynamic
  • Polar Pattern: Supercardioid
  • Frequency Response: 100Hz to 15KHz
  • Sensitivity: -56dBV (1.6mV) @ 1 Pa
  • Impedance: 310 ohms
KBM412 Specifications
  • Operating Principle: Moving coil dynamic
  • Polar Pattern: Cardioid
  • Frequency Response: 30Hz to 12KHz
  • Sensitivity: -66dBV (0.5mV) @ 1 Pa
  • Impedance: 60 ohms

Microphone Specifications

Microphone Type
This is the type of microphone included with the purchase of the item.

Wireless:All of these microphones can be used without the necessity of wires or cables to connect them. They usually come with a receiver that connects to the input device where the audio signal is being sent.

Shotgun: These microphones are suspended on a boom and are used primarily in video production and broadcasting.

Lavaliere: These microphones are clipped on to the lapel or tie of the talent for broadcast and video production audio.

Table Top: These microphones are designed with a built in stand or to be placed on a table top stand to be used for broadcasting and podcasting applications.

Headset: These microphones are to be worn on the head typically for live performance and theater production.

Handheld: These microphones are held in the hand and are used in a wide range of applications primarily vocals and public address.

Clamp On: These microphones attach directly on to an instrument.

Drum Package: These microphones are an all in one package for drums typically made of dynamic Kick, Snare, Tom, and a stereo condenser pair of overhead mics for Cymbals.

Drum Package
Designed Applications
The intended application the microphone is designed for.
Bass Amps
Drums
Kick Drum
Instruments
Number of Microphones
This is the number of microphones that are included in the package.
5
Polar Patterns
The polar pattern of a microphone determines how sensitive it is to receiving sounds as they arrive at different angles.
Cardioid
Transducer Type
The transducer type is the manner in which the audio signal is converted into an electrical signal.
Dynamic
Address
The configuration of the capsule determining on which side the microphone is sung or spoken into.
Top
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
30 - 15,000 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
-66 dB
Connection Type
This is the manner in which the microphone connects to the source unit. For wired microphones, this is the connector that directly connects the microphone to the mixer (or other input source unit). For wireless microphones, this is the connection that connects the microphones receiver to the mixer (or other input source unit).
XLR

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

PMP54

UPC

631922100846

Weight

11.00lbs

Internal SKU

pmp54

Internal Product ID

30863

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: CAD PMP54

  • USB Microphones | Recording Made Easy w/ USB Mics
  • Ribbon Microphones Explained | How They Work & When to Use