Expert Service 1-877-289-7664 [Hours]

Gemini RS-410

640W, 10" 2-Way High-Powered Speaker System with Built-in Amplifier and Titanium Driver

We apologize

This item has been discontinued

Gemini RS-410 Speaker System

The 10" Gemini RS-410 2-way active speaker system with 160W (130W + 30W) RMS power and 640W peak. The Gemini RS-410 cab houses a 10" woofer with 2" voice coil and a 1.35" coil pure titanium compression driver. Its trapezoidal ABS impact-resistant nylon fiber cabinet has a wide horn for superior sound dispersion.

The Gemini RS-410 Active Loudspeaker has XLR and 1/4" mic inputs with a separate gain control, line RCA and XLR inputs, and a 1/4" output connector. It's also equipped with a master volume output control, bass and treble tone control, and a power guided clip alert LED. Recessed, smooth-molded handles make the RS-410 loudspeaker easy to transport, and it is flyable and stand mountable to adapt to your venue.

Product Features
  • 10" 2-Way High-Powered Speaker System
  • Power Handling
    • Peak: 640 watts
    • RMS: 160 watts
  • Built-In bi-amplifier
  • 10" Woofer with 2" voice coil
  • Pure titanium compression driver with 1.35" coil
  • Linear frequency response between 60-18,000 Hz
  • Wide dispersion horn design
  • ABS impact resistant nylon fiber cabinet
  • Recessed smooth molded handle
  • Microphone input (XLR & 1/4" stereo) w/separate gain control
  • Line RCA & XLR input w/separate gain control
  • XLR & 1/4" output connectors
  • Bass and treble tone control
  • Master volume output control
  • Trapezoidal design
  • Flyable & Stand mountable
  • Power guided clip alert LED
  • Dimensions: 10-5/8"D x 14"W x 19-3/4"H
  • 1-year Manufacturer's warranty

General Features

Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
60 - 18,000 Hz
Height
The height of the item, measured from top to bottom, in inches.
19-3/4"
Width
The width of the item from left to right (side-to-side) measured in inches.
14"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
10-5/8"

Speaker Features

Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Not specified by manufacturer
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Not specified by manufacturer
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Not specified by manufacturer
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
60 - 18,000 Hz

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0

Product Summary

Manufacturer

Model Number

RS-410

UPC

747705204783

Weight

28.90lbs

Internal SKU

rs410

Internal Product ID

31100

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Gemini RS-410