6-3/4" (6-1/2" Oversized) 2-way KS Component Speakers System with Grilles (11KS65.2)
Product highlights
• Peak Power: 150W
• RMS Power: 75W
• Injection Molded Polypropylene Cone Woofer
• Santoprene Surround
• 1" Titanium Dome Tweeter
• Neodymium Magnet with Ferrofluid
• 4 Ohm Impedance
Directional installation makes a significant difference in a car’s audio entertainment, but the cost of high-end components tends to factor in the decision to settle for less and why should you settle? Kick factory sound to the curb with KS-Series Component Systems. They provide smooth, clear mids and highs expected from the leader in mobile audio, and at a price that won’t lighten the wallet.
Three sizes of KS Systems offer ultimate flexibility by providing multiple installation options for the end-user. Desiring a conventional component system setup? Kicker systems offer the kind of high-end directional sound sought by audiophiles. Want a drop-in coaxial upgrade for the doors? Simply remove the bullet-phase plugs in the woofers’ center and screw in the tweeters for a simple, quick solution to coaxial sound and audio realism. The use of high quality materials assist in making these speakers some of the best that you can find. The Injection molded polypropylene cone woofer and the santoprene surround increase the life of the speaker while making the sound clearer and more crisp.
The woofers and one-inch, titanium-domed tweeters are brought together by a symmetrical 12dB/octave high-pass-12dB/octave low-pass crossover/protection network that is second to none, featuring a 3-position tweeter attenuation switch for fine-tuning fickle high frequencies. The finishing touch is added by the latest cosmetics, featuring a metallic finish, a new grille, and spade wire terminals that allow for easy wiring access.
Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.
|
(newest, current model)
|
|
(previous model, replaced by Kicker KSS65 (41KSS65))
|
|
(previous model, replaced by Kicker KS65.2)
|
|
(previous model, replaced by Kicker KS650.2)
|
Best selling similar products
Rockford Fosgate Punch P1V2-675
• 150 watts Peak Each, 75 watts RMS Each
• 3/4" Tetolon Inverted Dome tweeters
• 3/8" Polypropylene-Piezo super tweeters
• Mica reinforced Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
$179.99
List price $239.99
• 150 watts Peak Each, 50 watts RMS Each
• Dome Tweeters
• Treated Paper cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB
$159.99
List price $159.99
• 270 watts Peak Each, 90 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB
$159.99
List price $191.99
Manufacturer:
Model Number:
11KS65.2
Weight:
7.68lbs
Internal SKU:
11ks652
Internal Product ID:
31835
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Sound Amazing
I have these hooked up in the front of my car to an aftermarket JVC Headunit and it sounds amazing even though they are underpowered. I normally amp my speakers, but I didn't feel like it and didn't have the space this time. The highs are very loud just the way I like it, and the mids put out decent bass too. I have had the 6.5" KS coaxials on an amp in my other car, and loved them so I figure I would buy these for my T/A and as well. I also bought another set of 6.5" and 4" KS coaxials for the rest of my speakers, and they are great too. I like being able to hear the highs and mids over my two 12" RE subs on my Hifonics Brutus 1700w amp.
10 found this helpful
Beasty
These look like the previous model I have only change that I see is the speaker grills. The ones I have are running off a hifonics amp and they make my ears ring after 10 min of listening at 3/4 volume. They are so loud that they blend perfectly with the 2 10" kicker cvx subwoofers at any amount of bass and those subs shake everything. I plan to buy 2 more pair here very soon and don't think twice on these. Buy now and you won't regret it!!
8 found this helpful
Superb Highs
Highs still going strong after a year. Clean sound and no distortion whatsoever. perfect for any system with or without amp.
6 found this helpful
the truth!!!!!!!
I did a lot of research trying to find the perfect speaker for my new Honda Ridgeline. I went to several local and national name audio stores trying to find the right item for the right price. Brendan has convinced me to get these speakers based from our conversation and all I can say is that I love these speakers!!! I put these speakers in 3 locations. The top front for highs and the front and rear doors. The sound is incredible. I wouldn't change a thing. I took out the factory sub and replaced it with an 8" Pioneer shallow. It gives you the right amount of bass that you WILL enjoy. MY TRUCK ROCKS BABY!!!!
5 found this helpful
NVX SDBSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(47)
$14.99
List price $18.74
NVX SDBPRO20 20 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
(4)
$109.99
List price $143.99
NVX SDBBP40 36 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
(39)
$114.99
List price $131.99
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
(51)
$39.99
List price $47.99
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(126)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
NVX 25 ft. of True Spec 12 Gauge Speaker Wire
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
(56)
$29.99
List price $49.99
Belva 23 ft. of True Spec 12 Gauge Speaker Wire
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
(43)
$6.99
List price $14.99
Belva BTK106 Trim Panel Remover
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(45)
$14.99
List price $19.99
Belva BTK105 Trim Panel Remover
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(73)
$11.99
List price $18.99
Dual 12" 3/4 MDF Sealed Subwoofer Enclosure (Belva MDFD12)
Dual 12-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/Polyfil (2.46 cu ft Airspace - 12SQB)
(120)
$99.99
List price $119.99
450W 6.5" Evolution TR Series 2-Way Component Speaker System
(26)
$189.99
List price $199.99
Used When Replacing a Factory Amplifier or Adding an Aftermarket Amplifier in Select Toyota Vehicles
$11.99
List price $13.99
2 Pieces 12" x 12" Accumat Sound Dampening Material
(2)
$9.95
List price $29.95
11.2" TFT-LCD Overhead Flip-Down Monitor with Built-in DVD, SD Card, USB Input and 3-Snap-on Color Skins
(2)
$179.99
List price $799.99
200W, 2-Channel Class AB Classic Series Car Amplifier (Performance Classic -- 10-30222)
$199.95
List price $239.95
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
