Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Kicker 11PH12 (PH12)

100W Bass Station Loaded 12" Carpeted Subwoofer Enclosure with Integrated Amplifier

Discontinued
|

We apologize

This item has been discontinued

Bundled Savings with this Product

FREE $25.00 Gift Card with order!

Receive a free $25.00 Sonic Electronix Gift Card with your order!

25.00

31846

470

Kicker 11PH12 (PH12)

$219.99

+

100% OFF

$25 Gift Card at Sonic Electronix

$25.00

Special Price $0 ($25.00 if purchased separately)

$25 Gift Card at Sonic Electronix

• No minimums or restrictions
• No expiration date
• Check your balance easily in your account area
• Secured to your account so you'll never lose it

25% off an NVX Sound Damping Trunk Kit with Purchase!

With purchase of any NVX subwoofer, you can save 25% on an NVX trunk kit that contains 20 sq. ft. of quality sound dampening material. This material quiets vibrations, stops rattles, and increases the subwoofer SPL.

15.00

31846

4

Kicker 11PH12 (PH12)

$219.99

+

25% OFF

NVX SDTK20

$59.99

Special Price $44.99 ($59.99 if purchased separately)

NVX SDTK20

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

(Offer 1 of 2)

Combined Total Price

$219.99

You Save $25.00

All In One BassStation

Want to add some bass to your car's audio system, but don't want to go through the hassle of messy installations? Kicker's 2011 BassStation Powered Subs are the perfect solution for those looking to add some bass with simple installation. This new amplified loaded enclosure series comes in four different models, a 12", 10", 8" and a dual subwoofer 12" model. Equipped with a quick connect Molex power harness, this loaded enclosure will make for easy set up and removal, making it easy to transfer from one location to the next. Nylon Velcro straps will ensure security while your vehicle is in motion. With an included remote bass control, the new BassStation series adds versatility and Kicker quality to any vehicle's car audio system.

General Product Features:
  • Specifically designed 12" heavy duty subwoofer
  • RMS power rating of 100 watts
  • Quick-connect Molex power
  • Subwoofer grille for added protection
  • Harness/plug for simple set up or removal
  • Nylon straps with Velcro help secure enclosure in place
  • Carpeted enclosure ideal for any car interior
  • Frequency response: 25-120 Hz
  • Sensitivity: 95 dB
  • 1-year Manufacturer's Warranty
Amplifier Features:
  • RMS power output: 100 watts
  • Wired remote bass level control included
  • KickEQ bass boost: Variable 0-6dB @ 40Hz
  • Auto turn on (12v or DC)
  • Speaker-level (high-level) inputs with signal sensing for automatic turn-on
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable low-pass filter (50-120 Hz, 12 dB/octave)
  • Subsonic filter (24dB/octave highs pass @ 25Hz)
  • Phase Shift: 0-180°
  • Frequency response: 25-120 Hz
Enclosure Specifications:
  • 12" Amplified Enclosure
  • Sealed design
  • 3/4" MDF
  • Two tone carpeted finish
  • Subwoofer grille manufactured into enclosure
  • Angled slim design ideal for limited space
  • Molex power terminal for quick set up and removal
  • Dimensions: 7-11/16"TD x 11-1/4"BD x 16-13/16"W x 14-15/16"H

Amplifier Specifications

Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

100 watts
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 120 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
24dB/octave @ 25hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
95 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 6 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
7.5A x 1 

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
100 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
95 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
25 - 120 Hz

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Sealed
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
1
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Hatchback Style, Angled Back
Height
The height of the item, measured from top to bottom, in inches.
14-15/16"
Width
The width of the item from left to right (side-to-side) measured in inches.
16-13/16"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
7-11/16"
Second Depth
The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
11-/14"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
3/4"
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Two Tone Color
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
On Sale
Closeouts

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
4.0
Design
5.0
Usability
4.0

Michael A

New Carlisle, IN

Overall
Durability
Value
Features
Design
Usability

excellent bass

December 30, 2013

great bass for the money! I paid $100 locally to have it installed.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Product Summary

Manufacturer

Model Number

11PH12

UPC

713034055518

Weight

30.00lbs

Internal SKU

11ph12

Internal Product ID

31846

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker 11PH12 (PH12)