Why Choose Kicker Amplifiers:
Kicker Performance Audio has been around since 1980 and has been producing amazing products since then. Kicker’s drive to consistently produce products that not only are great but also push the standards of the car audio industry is very apparent in all series of their amplifiers. All Kicker amplifiers are CEA-2006 Compliant, assuring you are receiving a continuous certified RMS power rating. Kicker will always exceed the rated power because Kicker is notorious for under rating their amplifiers. So really you will be getting more power than you actually pay for, which is not true for other lower end performance amplifiers that generally over rate their amplifiers. Kicker amplifiers will provide a choice of three automatic turn-on modes; remote, DC offset, or signal sense, which make them compatible with any car audio system. Along with their high-density convection heat sink for extreme heat dissipation and high efficiency MOSFET power supply, Kickers amplifiers are great way to go when selecting the perfect amplifier for your car audio system.
Kicker Fail Safe Technology (FIT):
Kicker has manufactured a new Fail-Safe Integration (FIT) technology into all of their amplifiers. The FIT technology uses isolated differential inputs in order to reject noise or electrical interferences, caused by engines, alternators or any other audio or video component throughout your vehicle. The differential inputs will use a muting circuit that will block out any additional noise that may stream down the line. The FIT technology will help created the cleanest and purest sound possible for any audio system. The Kicker FIT technology is setting the standard for high quality sound.
 |
- ZX Series Class AB Monoblock Car Amplifier
- RMS Power Rating:
- 4 ohms: 150 watts x 1 chan.
- 2 ohms: 300 watts x 1 chan.
- MOSFET power supply
- LED power and protection indicators
- Optional bass remote Kicker 10ZXRC sold separately
- Tuned Bass EQ (0-12 dB bass boost at 40 Hz)
- FIT (Fail-Safe Integration Technology) utilizes differential inputs to reject noise and electrical interference for the quietest operation possible and ultimate audio clarity
- Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios
- Optional vinyl skins for personalizing heat sinks available
- Eliminates unwanted noise in a system
- Boost, gain, and crossover frequencies are top-mounted for easy access, and a handy protection indicator featuring a new flashing yellow low-voltage light enhances the end panel
- Bridgeable operation
- Speaker-level inputs compatible (switchable) through RCA connection
- Preamp RCA outputs
- Automatic turn on modes: remote, DC offset, or signal sense
- Thermal, voltage, and short circuit protection circuitry
- Fixed low-pass filter (80 Hz, 24 dB/octave)
- Subsonic Filter (24 dB at 25 Hz)
- CEA-2006 compliant amplifier
- Frequency response: 25-20,000 Hz
- Dimensions: 13-1/2"L x 9-5/8"W x 2-1/8"H
- 8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
- Authorized Internet Dealer
- 2-year Manufacturer's warranty
Extend your Kicker warranty to 3 Years when you install your new Kicker amplifier with a compatible Kicker power kit! For a limited time, you can register your Kicker amplifier and power kit to qualify for an additional year of coverage. This offer is only available through official Kicker dealers and will only last for a limited time. With this amplifier, the following power kits will qualify for the extended warranty program: Kicker 09PK8, Kicker 05CK8, and Kicker 09ZCK8.
Product History:
|
|
|
(newest, current model)
|
|
|
|
(previous model, replaced by Kicker ZX300.1 (11ZX300.1))
|
Sonic Electronix, Inc. can only ship Kicker products within the United States of America.
|
Average Customer Rating is 4.9 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability |
|
4.7 |
| Value |
|
4.7 |
| Features |
|
4.5 |
| Design |
|
4.7 |
| Usability |
|
4.8 |
|
what's this?
|
|
|
Most Helpful Customer Reviews:
|
Review by
Stephanie from Santa Clarita, CA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Sound output is fantastic. I would recommend this amp to all friends and family.
|
|
Review by
Dirty Dev from NC
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
It's a little pricey, but its all worth it! Have it pushing 2 kicker comp 10s, it sounds loud and clean.
|
|
Review by
Philip from Whitman, MA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This amp really packs a punch. Loving it, couldn't go wrong.
|
|
Review by
Quyntin from West Hartford, CT
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I have the previous version of this amp paired with 2 12" kicker comps and this makes my subs hit! One of my friends has lower end amp rated a 1000 peak watts and my amp blows his away. The only thing I wish was this amp was a class d because it would help conserve battery power a little more.
|
|
Review by
John from Adams
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This amp is rated for 300 watts but the birthsheet says 369 for me. It powers my alpine type-s 12 very nicely and it definitely puts out 300 watts RMS.
|
