Expert Service 1-661-257-9993 [Hours]

Ashly PE3800

3800W Peak, 2-Channel Class H Power Amplifier w/ Protea DSP

We apologize

This item has been discontinued

Item Added to Cart

Ashly PE3800

3800W Peak, 2-Channel Class H Power Amplifier w/ Protea DSP

$2,654.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$219.99
Add Warranty
3 years of protection

Get FAST answers from customers ASK a Question See questions answers

The Power of Protea

PE-Series (Protea Enabled) amplifiers are far more than just another series of amplifier. The six 2-channel models boast a remarkable range of power all the way from 400 to 1900 watts per channel (@ 4 ohms), and their Ethernet functionalities certainly increase their already high value in professional audio applications. All PE-Series amplifiers are 2RU high, weigh less than 24lbs and will power 2, 4 or 8 ohm loads. Each amplifier also includes LED indicators for power, standby, protect, bridge mono, parallel mono and network communications, and are located on the left side of the front panel. On the right side, each channel has temperature and current indicators as well as a four-step signal meter.

PE Series amplifiers incorporate state of the art control and power technologies. Each amplifier in the series can be monitored and controlled through the Ethernet port on the rear panel using standard, affordable Ethernet hardware and Protea NE Software™. This software gives you access to many diverse features, including real time control of input attenuation, channel mute, channel polarity, and even enables you to remotely power the unit on or off. Protea NE also allows you to monitor I/O level, protect, temperature, output current and clipping.

Ashly Audio has maintained that one of the secrets to superb sound and dependability is well-thought-out design and meticulous execution. Ashly's PE Series takes that philosophy and multiplies it ten-fold. When your next project requires high performance amplifiers with superb sound, reliability, remote control and more, Ashly’s PE Series power amplifiers have been designed to meet and even exceed the needs of both portable and long-term installation applications.

Product Features:
  • 3800W Peak, 2-Channel Class H Power Amplifier
  • RMS Power Rating:
    • 8 ohms: 950 watts x 2 chan.
    • 4 ohms: 1900 watts x 2 chan.
    • Bridged, 8 ohms: 1900 watts x 1 chan.
  • Integrated Protea DSP allows graphic and/or parametric EQ, high and low pass filters, time delay, etc.
  • Rackmount design allows you to install the amplifier in any standard equipment rack
  • Ethernet remote control & monitoring
  • 2-Stage high efficiency switched mode power supply
  • Stepped and calibrated attenuator knob for each input
  • DC Voltage control of input & remote power turn-on/off
  • Temperature sensitive variable-speed fan w/ front to back airflow
  • Selectable subsonic filter
  • Selectable clip-limiter
  • 4-Stage level meters
  • Output current & temperature indicators
  • Signal-to-Noise Ratio: >111dB
  • Safety/Compliance: cTUVus/FCC, CE, RoHS
  • 1-year Manufacturer's warranty
All Model Specifications:
  • Distortion (SMPTE, typical): <0.01% (8 ohm load, 10dB below rated power)
  • Distortion (THD+N, typical): <0.01% (8 ohm load, 10dB below rated power)
  • Frequency Response: 20 Hz - 20 kHz, (unweighted) ± 0.15dB
  • Damping Factor: >400 (8 ohm load)
  • Input Impedance: 20k ohms, balanced
  • Maximum Input Level: +21dB
  • Input Gain: 26dB, 32dB or 1.5V (Selectable)
  • Control Network: onboard, standard 10/100 Ethernet
  • Load Protection: adjustable clip limiter
  • Cooling: Temperature sensitive variable-speed controlled fan, front-in, rear-out flow
  • Front Panel Indicators per channel: Clip, -6dB, -12dB, -18dB, Temp, Current
  • Front Panel Indicators: Power, Standby, Bridge Mono, Parallel Mono, Comm
  • Attenuators: 1 per channel, calibrated/stepped, software, offset, remote
  • Input Connectors: XLR female/TRS, Euroblock, XLR male (looping)
  • Output Connectors: Screw terminal (800, 1200) Speakon (1800, 2400, 3000, 3800)
  • Protection: inrush current limitation, temperature monitoring heat-sinks, output DC protection, power transistor SOA protection, output over-current protection, mains fuses protection
  • Dimensions: 19" x 3.5" x 15.5" (88.9mm x 483mm x 394mm)

Key Features And Comparison Chart

Model Ashly PE800 Ashly PE1200 Ashly PE1800 Ashly PE2400 Ashly PE3000 Ashly PE3800
Power Requirements - 1/8 Power, Pink Noise, 4O
Wattage 420W 540W 611W 790W 1010W 1220W
Current Requirements 8O, Both Channels Driven (typ=1/8 power, pink noise)
Idle 2.4A 2.8A 2.4A 2.4A 2.6A 2.8A
Idle (Typ) 6.6A 8.6A 8.4A 10.4A 12.4A 14.6A
Idle (Max) 13.6A 20.2A 26.2A 33A 42A 50A
Current Requirements 4O, Both Channels Driven (typ=1/8 power, pink noise)
Idle (Typ) 9.4A 13.6A 13.0A 15.8A 19.6A 22.6A
Idle (Max) 21.8A 33.8A 42.0A 54.0A 68.0A 80.0A
Signal to Noise
(20-20,000Hz)
>98dB >105dB >108dB >110dB >111dB >112dB
Output Circuitry Class-AB Class-AB Class-H Class-H Class-H Class-H
Power Cable 15A Edison 20A Edison 20A Edison 20A Edison 30A Twist 30A Twist
Net Weight 22.0 lbs. 22.0 lbs. 23.0 lbs. 23.0 lbs. 24.0 lbs. 24.0 lbs.
Shipping Weight 27 lbs. 27 lbs. 28.0 lbs 28.0 lbs 29.0 lbs 29.0 lbs

Power Specifications

Number of Channels
This is the number of channels that the professional amplifier is designed to power.
2 Channels
Continuous Power @ 8 ohm
This is the continuous (RMS) power output of the amplifier at an 8 ohm impedance.
1100 watts x 2 channels
Continuous Power @ 4 ohm
This is the continuous (RMS) power output of the amplifier at an 4 ohm impedance.
1900 watts x 2 channels
Continuous Power @ 2 ohm
This is the continuous (RMS) power output of the amplifier at an 2 ohm impedance.
1500 watts x 2 channels
Continuous Power @ 8 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 8 ohm impedance.
3800 watts x 1 channels
Continuous Power @ 4 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 4 ohm impedance.
3000 watts x 1 channels
Total Continuous Power
This is the total continuous power rating (RMS) that the amplifier is able to output.
3800 watts

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

H
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>98 dB
Frequency Response
The range of frequencies the amplifier will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20000 Hz
Input Sensitivity
This is the input sensitivity of the amplifier.
1.5 volts
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.01%
Voltage Gain
This is the voltage gain of the amplifier measured in decibels.
32 dB
Cooling Options
These are the different cooling systems used in the amplifier to keep it cool.
Cooling Fan
Inputs
These are the type of input connections that the amplifier has.
1/4" TRS
Euroblock
XLR
Outputs
These are the types of output connections that the amplifier has.
SpeakOn

Physical Specifications

Height
The height of the item, measured from top to bottom, in inches.
3-1/2"
Width
The width of the item from left to right (side-to-side) measured in inches.
19"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
15-1/2"
Weight (Pounds)
This is the weight of the item in pounds (lbs).
24 lbs
Rackmount Spaces
This is the total number of spaces that the preamplifier will occupy when mounted on a rack.
2U

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

PE3800

Weight

24.00lbs

Internal SKU

pe3800

Internal Product ID

32362

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Ashly PE3800