B-52 Matrix-1000V2

The MATRIX-1000 V2 is a complete sound reinforcement solution comprising of two 10” two-way satellites, a dedicated 15” subwoofer and a built-in three-channel 700-watt power amplifier. The three-channel amplifier features three distinct volume controls, electronic crossover with equalization and a VCA compressor. The circuitry is designed and fine-tuned to integrate all components for the best possible sound. There is no need to finesse settings on a crossover or compressor to make your system sound great. Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables, run two XLR cables to your mixer and you’re ready to go!

The MATRIX-1000 V2 satellites are loaded with a custom designed 10” speaker and 1” titanium diaphragm compression driver. The “horn” is a 900 by 600 elliptical waveguide that can be rotated 900 to optimize the dispersion pattern to best suit your particular application. These versatile speakers are pole-mountable and can sit as stage monitors. They also include 3/8” – 16tpi flying hardware for small venue permanent installations. The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer, allowing a mobile entertainer to stack, roll and transport the entire MATRIX-1000 V2 in and out of a venue in record time.

To transport the MATRIX-1000 V2, simply set the subwoofer on its casters and place the satellite speakers on to the subwoofer’s front panel, facing down. Fasten the satellites with the included locking strap using the handles on either side of the subwoofer cabinet. Place the included cover over the entire system and you’re ready to move the MATRIX-1000 V2 with ease.

The 15” subwoofer enclosure has two separate compartments. The front chamber serves as the cabinet for the custom B-52 15” subwoofer. The rear chamber houses all of the MATRIX-1000 V2’s electronic circuitry. This includes a 400-watt amplifier for the subwoofer, 2 x 150-watt amplifiers for the satellites, electronic crossover, VCA compressor, electronic equalization, pre-amp and power supply.

• Active Speaker System
• System includes two 10” 2-way satellites, a dedicated 15” subwoofer and a built-in three-channel 700-watt power amplifier
• A new high-performance compression driver for a smoother frequency response and lower distortion throughout the upper midrange frequencies
• A new elliptical wave guide with more uniform dispersion
• The addition of a voltage controlled amplifier (VCA) on all three amplifier channels to minimize the effects of amplifier clipping. This lowers the maximum distortion produced at VERY high drive levels and offers additional protection for the speaker components
• More durable FREE dust cover
• Improved B-52 handles
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

• Subwoofer Amp Output: 400 watts
• Satellite Amp Output: 2 x 150 watts
• Line In: XLR Female
• Parallel Out: XLR Male
• Input Impedance: 48k ohm
• Speaker Out: Speakon style connector
• Crossover Frequency: 120 Hz, 24 dB/Octave

• Speaker Input: Speakon-style connector
• LF/MF Woofer: 10” Custom-built transducer
• HF Driver: 1” Titanium Diaphragm on Elliptical Wave Guide
• HF Dispersion: 90° x 60°
• Nominal Impedance: 8 ohms
• Frequency Response: 120-19,000 Hz
• Crossover Frequency: 2500 Hz
• SPL: 101 dB
• Max SPL: 124 dB
• Weight: 30 lbs
• Dimensions: 11"D x 12"W x 19"H

• 15” Custom-built Subwoofer
• Frequency Response: 40-120 Hz
• SPL: 102 dB
• Max SPL: 127 dB
• Weight: 120 lbs
• Dimensions: 23"D x 19"W x 28"H