Expert Service 1-661-257-9993 [Hours]

JBL VPSB7118DPAN

3600W 18" Powered Subwoofer with JBL DrivePack Technology

We apologize

This item has been discontinued

Item Added to Cart

JBL VPSB7118DPAN

3600W 18" Powered Subwoofer with JBL DrivePack Technology

$5,869.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$439.99
Add Warranty
3 years of protection

Get FAST answers from customers ASK a Question See questions answers

Differential Drive Technology

The VPSB7118DP is a powered 18" integrated sub-woofer loudspeaker system featuring 3600 watts of peak output power, 1800 watts continuous, and onboard digital signal processing. Designed in cooperation with Crown International, the JBL DrivePack® DP-1 features leading-edge technology such as patented high efficiency Class-I power amplifier technology. Network control and monitoring is optionally available via System Architect software. The VPSB7118DP transducer is JBL’s 2268G 18" diameter Differential Drive® woofer.

General Features:
  • 3600W 18" Powered Subwoofer for portable or installed use
  • Optional input modules are DPAN and DPCN (CobraNet™ digital audio input) modules with HiQnet System Architect™ network control and monitoring
  • 3600 Watts peak power, 1800 Watts continuous
  • HiQnet™ compatible; network control
  • 18-inch Differential Drive® low-frequency driver for extended low-frequency output
  • Stylized and ergonomically designed powder-coated die-cast aluminum handles
  • Eight 3-inch fly track suspension points and twenty-four M10 fittings (optional detachable flying fittings and forged eye bolt kits available)
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
System Specifications:
  • DP1 Internal Amp Output: 3600 Watts Peak, 1800 Watts Continuous(at nominal load)
  • DP1 Output Section: 1-Channel, Class I
  • Audio Input Connector: XLR with loop-through
  • Network Control Connector: Ethernet, RJ45
  • Signal Processing: DSP based, resident in Input Module
  • System Management: DSP based limiters for mechanical and thermal protection
  • AC Power Oper. Range: Auto Select 90-132VAC/216-264VAC, 50/60 Hz
  • AC Line Voltage: 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)
  • AC Input Connector: Neutrik PowerCon
  • AC Loop-thru: Neutrik PowerCon
  • AC Current Requirement: 6A per system at 120V, 3A per systemat 240V
Acoustic And Electrical Specifications:
  • Nominal Impedance: 4 ohms
  • Frequency Response: 39 Hz – 145 Hz (±3 dB)
  • Frequency Range: 29 Hz – 165 Hz (–10 dB)
  • Max. Peak Output: 129 dB SPL 1m
Transducer Specifications:
  • Cabinet: (Not For Sale)
  • Grille: 362147-001
  • Low Frequency: JBL 2268G, 457 mm (18 in) dia., 76 mm (3 in) Dual Coil Differential Drive, Direct Cooled
  • DC Resistance: 2.7 ohms ±10%
  • Crossover Network 352817-001
Aural Sweep Test Specifications:
  • A. System Aural Sweep Test: 70.0mV Input, 10 Hz to 1 kHz
  • B. L.F. Aural Sweep Test: 10.0V Input, 10 Hz to 200 Hz
Physical Specifications:
  • Enclosure Dimensions: 514.4 mm x 701.8 mm x 812.8 mm D (H x W x D) (20.25 in. x 27.63 in. x 32.0 in. D)
  • Net Weight: 54 kg. (129 lbs.)

Subwoofer Specifications

Power Configuration
PA Subwoofers can be active or passive. Active subwoofers have a built-in amplifier that is designed to power the subwoofer, Passive subwoofers require an external amplifier to power the subwoofer.
Number of Drivers
This is the total number of low-frequency drivers in the PA Subwoofer enclosure.
Driver Size
This is the size of the low-frequency driver(s) in the PA Subwoofer.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
29 - 165 Hz
Maximum SPL (Sound Pressure Level)
This is the maximum Sound Pressure Level (SPL) of the PA Subwoofer. The higher the SPL rating, the louder the subwoofers are able to go.
Inputs
These are the types of input connections that the PA Subwoofer has.
Outputs
These are the types of outputs that the PA Subwoofer has. Outputs are typically found on active subwoofers that are capable of powering additional passive subwoofers/speakers.

Passive Subwoofer Specifications

Peak Power Handling
This is the maximum amount of power that the subwoofer is capable of handling. It is measured in watts.
Program Power Handling
This is the amount of program power that the subwoofer is capable of handling. It is measured in watts.
Continuous Power Handling
This is the amount of continuous power that the subwoofer is capable of handling. It is measured in watts.
Impedance
This is the amount of resistance that the subwoofer presents to the amplifier. It is important to match the impedance of the subwoofer to the impedance of the power amplifier.

Powered Subwoofer Specifications

Peak Power
This is the maximum amount of power that the internal amplifier is designed to output to the PA subwoofer.
Program Power
This is the amount of program power that the internal amplifier is designed to output to the PA subwoofer.
Continuous Power
This is the amount of continuous power that the internal amplifier is designed to output to the PA subwoofer.
Amplifier Class
This is the class of the built-in amplifier. An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.
Controls
These are the different amplifier controls and adjustments.
Crossover Frequency
This is the frequency that the divides the low frequencies from the mid-range frequencies.

Case Specifications

Mounting Options
These are the different types of ways that the PA Subwoofer is able to be mounted. Most of these PA subwoofers are designed to be floor standing systems, however some of them can be mounted in other fashions.
Convenience Features
These are some features of the PA Subwoofer that make moving it and using it easier.
Enclosure Material
This is the type of material that the PA Subwoofer is made out of.
Grille
If the PA Subwoofer includes a grille, it will be indicated here.
Weight (Pounds)
This is the weight of the item in pounds (lbs).

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

VPSB7118DPAN

Weight

129.00lbs

Internal SKU

vpsb7118dpan

Internal Product ID

32445

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JBL VPSB7118DPAN