Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

Lab Gruppen FP9000

9,000W, 2 Channel Touring Amplifier w/ Binding post

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Lab Gruppen FP9000

Over the past decade, Lab.gruppen touring amplifiers have earned the praise of renowned FOH engineers and leading sound rental companies worldwide. The FP+ Series model FP 9000 continues this tradition. At the core of the FP 9000’s performance is the patented Class TD output stage, a breakthrough amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B technology designs. Further contributing to the remarkable efficiency of the FP 9000 is a Regulated Switch Mode Power Supply (R.SMPS), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the exceptional power density of the FP 9000.

Product Features

  • Exceptional power density – The FP 9000 delivers a total of 9000 W (2 x 4500 W @ 2 ohms) in only 2U.
  • Lab.gruppen sound quality – FP 9000 amplifiers maintain the Lab gruppen reputation for sound quality, with transparent midand high-frequency performance and new circuit designs optimized for sustained low-frequency output
  • NomadLink® network ready – Monitoring and control of key functions accessible via the intuitive DeviceControl software and the robust, daisy-chained NomadLink network, as well as by the leading third party control platforms.
  • Patented Class TD® amplifier topology – Road-proven output stage delivers Class B audio quality with Class D efficiency.
  • Regulated Switch Mode Power Supply (R.SMPS™) – Output power remains constant even with significant drops in the mains voltage.
  • Efficient cooling system – Unique, lightweight Intercooler® copper cooling system dissipates more heat to allow extended peak output.
  • Adjustable parameters – Selectable Gain, scalable Voltage Peak Limiter (VPL™), and bridge-mode operation allow custom configuration for any system or application.
  • XLR input and link connectors
  • Heavy-duty binding posts
  • Comprehensive protection and warning – Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start.
  • Dimensions: 15 5/8"L x 19"W x 3 1/2"H
  • 1-year Manufacturer's warranty

Power Specifications

Number of Channels
This is the number of channels that the professional amplifier is designed to power.
2 Channels
Continuous Power @ 8 ohm
This is the continuous (RMS) power output of the amplifier at an 8 ohm impedance.
1600 watts x 2 channels
Continuous Power @ 4 ohm
This is the continuous (RMS) power output of the amplifier at an 4 ohm impedance.
3000 watts x 2 channels
Continuous Power @ 2 ohm
This is the continuous (RMS) power output of the amplifier at an 2 ohm impedance.
4500 watts x 2 channels
Continuous Power @ 8 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 8 ohm impedance.
6000 watts x 1 channels
Continuous Power @ 4 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 4 ohm impedance.
9000 watts x 1 channels
Total Continuous Power
This is the total continuous power rating (RMS) that the amplifier is able to output.
9000 watts

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
112 dB
Frequency Response
The range of frequencies the amplifier will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
2 - 34200 Hz
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.05%
Voltage Gain
This is the voltage gain of the amplifier measured in decibels.
38 dB
Cooling Options
These are the different cooling systems used in the amplifier to keep it cool.
Cooling Fan
Inputs
These are the type of input connections that the amplifier has.
XLR
Outputs
These are the types of output connections that the amplifier has.
Binding Posts (Banana Clip Ready)

Physical Specifications

Height
The height of the item, measured from top to bottom, in inches.
3-1/2"
Width
The width of the item from left to right (side-to-side) measured in inches.
19"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
15-5/8"
Weight (Pounds)
This is the weight of the item in pounds (lbs).
26.4 lbs
Rackmount Spaces
This is the total number of spaces that the preamplifier will occupy when mounted on a rack.
2U

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

FP9000

Weight

45.00lbs

Internal SKU

fp9000

Internal Product ID

32567

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Lab Gruppen FP9000