Expert Service 1-661-257-9993 [Hours]

1200W Complete Pioneer + Jensen Bass Package

Jensen Power 1050 Amplifier + Pioneer 12" Subwoofer + Amp Kit + 12" Box + Includes Audio Test CD and SPL Meter

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

1200W Complete Pioneer + Jensen Bass Package

Jensen Power 1050 Amplifier + Pioneer 12" Subwoofer + Amp Kit + 12" Box + Includes Audio Test CD and SPL Meter

$257.26

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$32.99
Add Warranty
3 years of protection

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$29.99

Add
XS Power XP750 Special Edition

12-Volt Deep Cycle AGM Power Cell with 750 Max Amps

$72.99

Add
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$97.99

Add

Don't see the accessory you're looking for?
View all available accessories for the 1200W Complete Pioneer + Jensen Bass Package.

Get FAST answers from customers ASK a Question See questions answers

Pioneer and Jensen Complete Bass Package

This Sonic Electronix Exclusive Bass package showcases a Jensen Power 1050 Amplifier along with a Pioneer Champion 12" Subwoofer. This excellent bass package pushes 430 watts of clean, continuous RMS power. The Pioneer Subwoofer has Dual 4 Ohm Voice Coils; meant to be wired in parallel down to a final impedance of 2 Ohms. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

This Pioneer Champion subwoofer requires 400 watts of RMS power. The included Jensen Power 1050 amplifier will compliment this required power by supplying a perfect matchup of certified RMS continuous power.

This Sonic Electronix Exclusive Combo includes an AutoSound Test CD to help get the most out of your system and test the different frequencies. An SPL meter is also included so you can let everyone know how loud your system can get!

Pioneer TS-W309D4 Features:
  • 12" Dual 4 ohm Champion Series Subwoofer
  • Power Handling:
    • Peak: 1,400 watts
    • RMS: 400 watts
  • Impedance: Dual 4 ohm
  • Seamless Injection Molded Polypropylene (IMPP) composite cone
  • Dual layer, fiber reinforced elastic polymer surround
  • Large spring loaded, push style binding posts
  • High temperature voice coil
  • Large double stacked high energy magnets
  • Designed for sealed, ported, or bandpass enclosures
  • Recommended enclosure volume:
    • Sealed: 1.25 cu. ft
    • Ported: 1.5 cu. ft
    • Bandpass: 0.9 cu. ft in front / 0.9 cu. ft in rear
  • Frequency response: 20-220 Hz
  • Sensitivity: 94 dB
  • 1-year SonicElectronix.com warranty
Amplifier Features:
  • Power Series Class AB Monoblock Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 290 watts x 1 chan.
    • 2 ohms: 430 watts x 1 chan.
  • Max power output: 1050 watts x 1 chan.
  • MOSFET power supply
  • Wired remote bass level control included
  • LED power and protection indicators
  • Tuned Bass EQ (0-12 dB bass boost at 45 Hz)
  • High current bipolar output transistors
  • Preamp RCA outputs
  • Short circuit, DC offset, thermal, and overload protection circuitry
  • Variable low-pass filter (40-150 Hz, 12 dB/octave)
  • Subsonic Filter (12 dB at 15-55 Hz)
  • CEA-2006 compliant amplifier
  • Frequency response: 5-150 Hz
  • Dimensions: 17.25"L x 9"W x 2.5"H
  • 1-year Manufacturer's warranty
Enclosure Features
  • 12" Sealed Square Subwoofer Enclosure
  • Black carpet
  • Gold plated binding posts
  • Banana clip ready
  • Mounting depth: 13"
  • Cutout diameter: 11-1/8"
  • Box volume: 1.13 cubic feet
  • Made from 3/4" Medium Density Fiberboard (MDF)
  • Dimensions: 14"D x 14"W x 14"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Poly-Fill Features:
  • 20 oz of Polyester Fiber-fill for sub boxes
  • Adds better bass to your system by making your sub "think" it is in a larger enclosure
  • Made with newer, state-of-the-art processes that offer a very durable batt with little or no fiber migration
  • PolyFil
Amplifier Kit Features:
  • Complete 8 Gauge Amplifier Installation Kit for a full installation of an amp
  • Includes gold plated RCA interconnect cables
  • Designed by the manufacturer for systems up to 1000 watts max
  • Everything you need for an amplifier installation in one convenient package
  • 1-year Manufacturer's warranty
Amplifier Kit Includes:
  1. 17 ft. of 8AWG Blue power cable
  2. 3 ft. of Black ground cable
  3. 17 ft. of Clear blue RCA cable
  4. 25 ft. Speaker wire
  5. 17 ft. of Clear blue remote turn-on wire
  6. 1 AGU fuse holder + 40AMP AGU fuse
  7. 5/16" Gold ring terminal
  8. 1/4" Gold ring terminal
  9. #10 Gold spade terminal
  10. 4 Gold speaker terminals
  11. 3 Grommets
  12. 20 4" cable ties
Capacitor Features:
  • 1.0 Farad Capacitor from Raptor
  • True 1.0 Farad Capacitor for systems up to 1000 watts
  • Built in digital display
  • Working voltage 20/24 volt surge
  • E.S.R. less than 0.002 Ohm
  • 24K Hard gold plated brass terminals
  • Uses ring terminals to connect to the needed power cable
  • Includes mounting hardware for a secure installation
  • Color is Silver with red
  • Dimensions: 9"L x 3"W x 3"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Note: The Raptor C1.0FM does not come with any resistors to charge the capacitor. If you need some resistors, we recommend the Directed 652T.

SPL Meter Features:
  • 130db Max Handheld SPL Meter
  • Measure dB range from 60 to 130 dB
  • Back light so you can always read the display of the SPL1000
  • Peak and minimum volume hold functions
  • Automatic turn off and low battery indicator
  • Ideal for setting up your home or car stereo system
  • Great for monitoring the noise level in an office or home
  • Push the limits of your mobile audio system and see just how loud it goes!
  • Compact Size
  • Handheld
  • Accurate Readings
  • Includes safety earplugs
  • Dimensions: 1-1/4"D x 2-1/8"W x 5"H
  • 1-year SonicElectronix.com warranty
AutoSound Test CD Features:
  • The Low Frequency Test CD #101
  • Contains 99 tracks specifically designed and recorded for performing electronic and acoustic tests on audio systems
  • You can find low frequency resonance's in audio listening environments
  • Perform measurements on woofers and enclosures
  • Evaluate low level resolution of CD players and headunits
  • Woofer measurements include impedance, which can be plotted by using CD#101 in a CD player, a resistor, and a VOM (Volt-Ohm Meter)
  • Complete instructions are shipped with each disc
  • If you're serious about audio, this disc is a must-have
  • 1-year SonicElectronix.com warranty
AutoSound Test CD Features:
  • Track 1: 1 kHz tone at -20 DB (2:06) Helps you measure the reference loudness of a component
  • Track 2: 1 kHz tone at -20 dB, fades to black (3:55) Tests the reproduction quality of a sound system when driven with extremely low level signals
  • Track 3: Polarity Pulses (3 positive - 1 negative) (2:00) To measure relative and absolute polarity
  • Track 4: 20-20,000 Hz slow sweep (1:10) To take response measurements and to check for resonant frequencies
  • Track 5: 20-20,000 Hz fast sweep (:19)
  • Track 6: Sequential tones 20-20,000 Hz, twice (1:36) For use with test instruments that measure sequential tones
  • Track 7: Composite tones (2:04) Used for measurements with swept spectrum analyzers and to determine the overload threshold of a system
  • Track 8: 50 Hz square wave with sweep to 20 Hz (2:00) Used for setting up low-frequency servo systems
  • Track 9: Low-frequency bursts (1:27) Used to evaluate the transient behavior of a subwoofer system
  • Tracks 10-98: Frequencies corresponding to track numbers. The numerical track indicator of the CD player matches with the frequency that is recorded on that track, for example, track 10 = 10Hz
  • Track 99: 1 kHz at digital zero (2:36) Used to test the output headroom of a CD player

Amplifier Power Specifications

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
290 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
430 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
Not Stable
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage. Often times this maximum is achieved during a brief musical burst, such as a drum accent or low bass hit. Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. This is the peak power output for the amplifier's 5th channel.
1050 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

1050 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

430 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 150 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
15 - 55 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
100 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
25A x 4 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Compatible Vehicle Make and Model
The model of vehicle that this vehicle specific product is designed for. Please keep in mind that engine variations can affect the compatibility of the products.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0
J Mic

Lando, Florida

Overall
Durability
Value
Features
Design
Usability
Great Bang For Your Buck

April 13, 2011

At first, I wasn't expecting a whole lot with only one twelve but I was pleasantly surprised. The one twelve in the back of my Pontiac G6 shakes my whole car with clean sounding base. I usually don't even bring it past around 40-50% because it becomes so loud. For the price this is a great buy. It also comes with a cool SPL meter to see how many db's your system is putting out. If you're looking for loud bass without the rattle and distortion, this is a great buy.

1 of 2 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

Your Price $29.99

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $89.99

XS Power XP750 Special Edition

12-Volt Deep Cycle AGM Power Cell with 750 Max Amps

Your Price $72.99

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $97.99

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.99

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $94.97

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $69.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

Items we think you might want
AK8 main
InstallBay 8 Gauge Amp Kit (AK8)

• Complete 8 Gauge Amplifier Installation Kit with RCA Interconnect Cables
• 17ft. Blue Power Cable
• 3ft. Black Ground Cable
• 17ft. Blue RCA Cable
• 17ft. Blue Remote Turn-On Wire

Your Price $10.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

TSW309D4_POWER1050

Weight

53.70lbs

Internal SKU

tsw309d4_power1050

Internal Product ID

33373

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: 1200W Complete Pioneer + Jensen Bass Package

  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?
  • How To Install an Amplifier: Car Amplifier Basics Part 2