Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale- more products added!

Gemini XP-3000

1500W High Power Professional Power Amplifier with DC Output Protection & Short Circuit Protection

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Gemini XP-3000 Power Amplifier

The XP series power amps are professionally designed and built for mobile DJ/PA use and custom sound installation. Both the XP-6000 and XP-3000 are stable at 2 ohms. The XP Series are rugged, lightweight, and offer unmatched value in their class, designed with superior sound quality first. Only the best components go into these power amps to provide tight low-end, full and rich high-end, and pleasing mid-range. The XP Series power amps are especially designed for professionals who value high power, audio clarity, and lasting performance.

Product Features
  • High Power Professional Power Amplifier
  • Power Handling
    • 8 ohms: 350 watts x 2 chan.
    • 4 ohms: 550 watts x 2 chan.
    • 2 ohms: 750 watts x 2 chan.
    • Bridged @ 8 ohms: 1100 watts x 1 chan.
    • Bridged @ 4 ohms: 1500 watts x 1 chan.
  • Optimized for maximum headroom into 2, 4 and 8 ohm speaker systems
  • Air guided Front-to-rear airflow and cooling fan for thermal stability and reliability
  • XLR and TRS (6.5mm Jack) balanced inputs
  • Auto limitation circuit built in for amp output protection
  • Stereo, parallel mono and mono bridge
  • Variable speed fan for low noise
  • Comprehensive front panel indicators including signal, clip, protect and bridge
  • 3 Speakon outputs for channels A/B/Bridge
  • 5-Way binding banana plug channel outputs
  • Bridge control switch
  • DC output protection and Short circuit protection
  • Ground lift switch
  • Rack mountable
  • Frequency Response: 10-50,000 Hz
  • Total Harmonic Distortion: Less than 0.5%
  • Input Sensitivity & Impedance: 0.77v
  • Signal-To-Noise Ratio: >90 dB
  • Dimensions: 15-3/4"D x 19"W x 3-1/2"H
  • 1-year Manufacturer's warranty

Power Specifications

Number of Channels
This is the number of channels that the professional amplifier is designed to power.
2 Channels
Continuous Power @ 8 ohm
This is the continuous (RMS) power output of the amplifier at an 8 ohm impedance.
350 watts x 2 channels
Continuous Power @ 4 ohm
This is the continuous (RMS) power output of the amplifier at an 4 ohm impedance.
550 watts x 2 channels
Continuous Power @ 2 ohm
This is the continuous (RMS) power output of the amplifier at an 2 ohm impedance.
750 watts x 2 channels
Continuous Power @ 8 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 8 ohm impedance.
1100 watts x 1 channels
Continuous Power @ 4 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 4 ohm impedance.
1500 watts x 1 channels
Total Continuous Power
This is the total continuous power rating (RMS) that the amplifier is able to output.
1500 watts

Amplifier Specifications

Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
90 dB
Frequency Response
The range of frequencies the amplifier will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
10 - 50000 Hz
Input Sensitivity
This is the input sensitivity of the amplifier.
0.77 volts
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.5%
Inputs
These are the type of input connections that the amplifier has.
1/4" TRS
XLR
Outputs
These are the types of output connections that the amplifier has.
Binding Posts (Banana Clip Ready)
SpeakOn

Physical Specifications

Height
The height of the item, measured from top to bottom, in inches.
3-1/2"
Width
The width of the item from left to right (side-to-side) measured in inches.
19"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
15-3/4"
Weight (Pounds)
This is the weight of the item in pounds (lbs).
31.7 lbs
Rackmount Spaces
This is the total number of spaces that the preamplifier will occupy when mounted on a rack.
2U

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0

Product Summary

Manufacturer

Model Number

XP-3000

UPC

747705204479

Weight

31.70lbs

Internal SKU

xp3000

Internal Product ID

33381

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Gemini XP-3000