Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

JL Audio 10W7AE-3

750W 10" Anniversary Edition W7 Series Single 3 ohm Subwoofer

In Stock
|

List price $799.95

$559.95

with warranty

You Save: $240.00 (30.00%)

Arrives by Friday, Sept. 26 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Fri, Sept. 26

Get FAST answers from customers ASK a Question See questions answers

W7AE 10th Anniversary Edition Subwoofer Drivers
The Tenth Anniversary edition of JL Audio’s ultimate performance subwoofers feature multiple patented technologies and extreme excursion capabilities. DMA-optimized motor systems, OverRoll™ Surround, cast aluminum-alloy frame, W-Cone technology, Elevated Frame cooling, Floating Cone Attach Method. 8W7, 10W7 and 12W7 have a single voice coil, 13W7 has dual voice coils. Designed for sealed and ported enclosures. W7AE’s feature black powder-coated baskets, a special bright nickel finish clamp ring and unique Anniversary Edition badging and labeling.


 

Product Features:

  • 10" Single 3 Ohms W7 Series Subwoofer
  • 10th Anniversary Edition
  • Not sure which model you're looking for?
    • Click here to compare!
  • Power Handling:
    • Peak: 1500 watts
    • RMS: 750 watts
    • Recommended Power Range: 250-750 watts
  • Impedance: Single 3 ohms
  • OverRoll Surround
  • W-Cone
  • Floating-Cone Attach Method
  • Plateau-Reinforced Spider Attachment
  • Radially Cross-Drilled Pole Piece
  • Massive Forced-Air-Cooled Aluminum Alloy Frame
  • Highly Linear, DMA-Optimized Motor System
  • Huge Diameter, Progressive Roll Spider
  • Co-Extruded Double Lead Wires
  • Ultra-Long Voice Coil
  • Black powder-coated baskets
  • Bright nickel finish clamp ring
  • Unique Anniversary Edition badging and labeling
  • 1-year SonicElectronix.com warranty
JL Audio 10W7AE3 Recommended Power Range

JL Model Comparison

Model Peak power RMS Power Cone Material Surround Material Sensitivity Frequency Response Xmax Terminals Made In America
W7 Series 1000-3000 Watts 500-1500 Watts Polypropylene Foam Overroll 83-86.3 dB 15-250 Hz 19-32 mm Push Terminals
W6 Series 1200 Watts 600 Watts Polypropylene Nitrile-butylene Rubber 84-85.4 dB 20-250 Hz 19 mm Push Terminals
W3 Series 500-1200 Watts 250-600 Watts Polypropylene Rubber 80-88 dB 20-250 Hz 9-15.5 mm Push Terminals
W1 Series 600 Watts 300 Watts Polypropylene Rubber 83.9 dB Not Specified 11 mm Push Terminals
W0 Series 600 Watts 300 Watts Polypropylene Rubber 85.64 dB 22-250 Hz 11-11.4 mm Push Terminals
WX Series 400-500 Watts 200 Watts Polypropylene Foam 86-87 dB 22-250 Hz 9.5-9.8 mm Spade Terminals

Product History:

JL Audio 10W7AE-3 thumbnail
(newest, current model)
JL Audio 10W7 thumbnail
(previous model, replaced by JL Audio 10W7AE-3)

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
W7 (JL Audio)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1500 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
750 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
3 ohms
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 250 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
84 dB
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Polyester Foam
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Bandpass
Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.25 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.5 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
8"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
8-3/4"

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
4.4
Features
5.0
Design
5.0
Usability
4.6
Dan

Traverse City, Michigan

Overall
Durability
Value
Features
Design
Usability
Great Sub!!!!

January 23, 2013

Awesome sub! have had it 2 years now without issues! would highly recommend to anyone looking for loud bass but with small space to deal with!

1 of 1 found this helpful

Help our customers find the most helpful reviews

Robert

Ypsilanti, MI

Overall
Durability
Value
Features
Design
Usability
Great SUB! Wicked Bass!

September 22, 2012

Great subwoofer, this thing rocks my car. Keep in mind tho that you need a custom box to fit this sub as my universal 10" box did not fit it.

1 of 1 found this helpful

Help our customers find the most helpful reviews

loc18

jacksonville

Overall
Durability
Value
Features
Design
Usability
# 1 sound quality

March 14, 2011

best sound quality i have own yet ..!!!!!!

1 of 1 found this helpful

Help our customers find the most helpful reviews

Reggie

Woodbridge, VA

Overall
Durability
Value
Features
Design
Usability
You get what you pay for.

June 9, 2014

I owned a Alpine SWX 1243D powered by a Rockford Fosgate T1000-1BDCP. I wanted to use less space in my 2011 Pilot so I purchased the JL Audio 10w7ae-3. I optioned for a sealed box that was designed for the JL Audio 10w7ae-3 so my box was slightly smaller than the ported box I was using. I purchased a JL Audio HD750/1 to push it. My new ten inch sub was as heavy as my 12 inch sub but overall I occupy less space and the power amp is much lighter. Suffice to say I saved a little space but this JL Audio setup is phenomenal. My older setup shook my truck more but the bass produced by my JL is lower, smoother and deeper than my Alpine. I am very happy with my JL sub/amp combination. It costs a bit but it is worth it. Besides I am giving my older setup to my son. Who knows one day when my money is right I might get him a 12w7ae-3. I know he would love it. I am very happy and excited.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jon

FPO, AP

Overall
Durability
Value
Features
Design
Usability
Simply Put

October 27, 2013

I have two of these in a dual ported enclosure made to JL specs. Powered each of them with an XD600/1. I can not tell you how many times I have turned heads. Could only place the gain at slightly less than half way. There is also nothing like a JL amp. If you are planning on getting these and running something cheap, you will not get the same SQ. By FAR the best, loudest and clearest subs I have ever owned. CONS: Running two of these in an enclosure is pushing 100lbs but well worth it, nevertheless.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

10" Single Vented Enclosure with 1" Baffle for JL Audio 10W7 Subwoofers

Engineered for the JL Audio10W7-3 & JL Audio 10W7AE-3

Your Price $122.95

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

Your Price $119.99

Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $159.95

Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

Your Price $99.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

JL Audio SGR-10W7

Aluminum Bar Grille Set for JL Audio 10W7

Your Price $19.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $13.99

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

10W7AE-3

UPC

699440921145

Weight

35.50lbs

Internal SKU

10w7ae3

Internal Product ID

33506

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JL Audio 10W7AE-3