Expert Service 1-877-289-7664 [Hours]

Call in for Black Friday Deals

MTX Audio TN573

5" x 7" / 6" x 8" 3- Way Terminator Series Car Speakers

In Stock. Only 3 Left!
|

List price $69.95

You Save: $16.00 (22.87%)

$53.95

with warranty

+ FREE Shipping in US 48

Order within 94 hrs 6 mins to ship 12/1

Arrives by Wednesday, Dec. 3 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

In Stock. Only 3 Left!

Arrives by Wed, Dec. 3

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

Get 25% off Sound Dampening Speaker Kit with Purchase!

For a limited time, get 25% off of the NVX SDSK2 Speaker Kit with a qualifying pair of speakers! Sound dampening will eliminate rattles, insulate against heat, and also improve the sound and output of your speakers!

3.75

33699

100

MTX Audio TN573

$53.95

+

25% OFF

NVX SDSK2

$14.99

Special Price $11.24 ($14.99 if purchased separately)

NVX SDSK2

• Eliminates Road Noise
• Quiets Vibrations
• Stops Annoying Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Peel and Stick Installation
• Two 10" x 10" Pieces

(Offer 1 of 1)

Combined Total Price

$65.19

You Save $3.75

Buy with the NVX SDSK2 Sound Dampening Kit and Save $10.00!


Click here to buy the combo package!
  • 5" x 7" / 6" x 8" Terminator Series 3-Way Car Speakers
  • Power Handling:
    • Peak: 220 watts per pair / 110 watts each
    • RMS: 110 watts per pair / 55 watts each
  • Polypropylene midwoofer cone material
  • Rubber midwoofer surround type
  • 13mm Mylar tweeter
  • Nomex/polycotton spider design controls movement
  • Ideal factory replacement speakers
  • 4 ohms impedance
  • Top-mount depth: 2-5/16"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Pair

Product History:

MTX TERMINATOR573 thumbnail
(newest, current model)
MTX TN573 thumbnail
(previous model, replaced by MTX TERMINATOR573)

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Terminator (MTX)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
5" x 7" (also mounts in most 6" x 8" locations)
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
3-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Mylar
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
110 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
55 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
87.8 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
46 - 20,000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Yes
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-5/16"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
4-15/16 x 7-3/16 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
33%
4 Star
50%
3 Star
17%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.7
Value
4.5
Features
4.5
Design
4.7
Usability
4.8
Luis

Fresno Ca

Overall
Durability
Value
Features
Design
Usability
Bang for the buck!

July 14, 2013

I was actually not expecting much out of these except a faint upgrade from stocks but I'm actually pretty surprised. besides the subtle distortion at high volumes these are nice enough speakers that I bough a second pair for my back speakers I would definitely recommend these to anyone looking to not spend a whole lot!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

mitch

senoia, GA

Overall
Durability
Value
Features
Design
Usability
Decent

June 10, 2013

Decent Speakers, I will be replacing them with high wattage ones soon. They sound good, no issues other than I need something that will handle more power.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Kent

Marrero, LA

Overall
Durability
Value
Features
Design
Usability
mtx rockin

September 28, 2012

Priced just right for these rock. Sound deadener does the trick with these speakers.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Edwin

Ft worth, TX

Overall
Durability
Value
Features
Design
Usability
mtx tn573 5x7 speakers

July 16, 2012

Well I purchased these and put them in my 08 Mustang GT Kenwood DNX418 head unit, and I was disappointed in these speakers. They have good clarity until you turn them up, and they get fuzzy when I listen to rock/heavy metal. Overall, the quality is good.

0 of 0 found this helpful

Help our customers find the most helpful reviews

SpeedyEddy

Fort worth, TX

Overall
Durability
Value
Features
Design
Usability
MTX SPEAKERS ROCK

May 7, 2012

I bought 4 of these to replace the stock speakers in my 08 mustang. They sound great running off the stock amps and kenwood ddx418 hu in the car.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Matt

Spring Hill, FL

Overall
Durability
Value
Features
Design
Usability
MTX Audio TN573

April 20, 2012

The name is cheap but these mid speakers are excellent, they sound amazing and clear, definitely would recommend them to anyone looking for a bang for your buck.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Watt Rating and others reviews
Jacob B on Aug 16, 2014

Product Summary

Manufacturer

Model Number

TN573

UPC

715442171200

Weight

4.00lbs

Internal SKU

tn573

Internal Product ID

33699

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: MTX Audio TN573