Feel the Difference with 1 Punch
Sonic Electronix has the brand new 2011 model of the Rockford Fosgate P1S412 Punch Stage 1 Subwoofer. This woofer has a peak power rating of 500 watts and an RMS rating of 250 watts. Just like all Rockford Fosgate products, this subwoofer is built with quality and durability. The P1S412 features a high modulus kevlar reinforced paper cone with a high density NBR half-roll surround. The 10 AWG nickel plated push terminals with keep a secure connection at all times while resisting corrosion. The Punch Series 12" woofer also comes equipped with 2" 4-layer high temp voice coil, poly cotton spider, extended pole piece, bumped backplate, and a proprietary spider venting/cooling technique that helps keep subwoofer operating at a safe temperature. Once again, Rockford has made a top notch product at an affordable price.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
Product Features
- 12" Single 4 Ohm Punch Series Stage 1 Subwoofer
- Power Handling:
- Peak: 500 watts
- RMS: 250 watts
- Impedance: Single 4 ohm
- High modulus Kevlar reinforced paper cone and dust cap provides durability
- High density NBR half-roll surround for enhanced excursion
- Custom insulated/isolated 10 AWG nickel plated compression input push terminal assembly will keep connection secure and resist corrosion
- Tear and fatigue resistant poly-cotton spider will hold up against high amounts of excursion
- High temperature 2" 4-layer voice coil with spun laced Nomex insulating reinforcement collar
- Optimized motor magneteics with extended pole piece and bumped backplate
- Fatigue resistant and reduced strain stitched on flexible lead wire design
- Multi point high-temperature/high-strength neck joint bonding technique for a cleaner bass output
- High quality 16 gauge compound bend frame geometry adds to the sturdy construction
- Semi flexible PVC removable protective motor cover helps keep motor clean and dust free
- Proprietary spider venting/cooling technique helps keep subwoofer operating at a safe temperature
- Decorative ABS trim ring for attractive appearance
- Mounting Diameter: 11-1/4"
- Mounting Depth: 6"
- Overall Diameter: 13-1/16"
- Frequency Response: 25-250 Hz
- Sensitivity: 86 dB
- Xmax: 9mm
- 1-year SonicElectronix.com warranty
Product History: |  |
| (newest, current model) | |  |
| (previous model, replaced by Rockford Fosgate P1S4-12 (11P1S412)) |
|
|
Average Customer Rating is 4.6 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.2 |
| Value | | 4.8 |
| Features | | 4.0 |
| Design | | 4.6 |
| Usability | | 4.8 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
Tyler from Topeka, KS
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I have 2 of these and they sound amazing for only being P1's. They sound way better then most of my friends systems. They're great for the price too. Love them!
|
|
Review by
crazyface from jville nc
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I have one of these in a ported box running off a p300-1, i have the 4ohm woofer. To start off with do not, i repeat do not over power this woofer it will fry it instantly. Hooked a t1000-1bd and it lasted 15 min. The woofer would get extremely hot just on the p300, and would distort after a good hard 20 min of playing, the woofer has great mid and low bass but the deep stuff is just out of its league. I know what your thinking well ya its going to fry on a t1000 but i put a sundown sa10 on it and it played for months.
|
|
Review by
Get Low from Montgomery, AL
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I have 4 of the p1's wired down to 1 ohm on a kole 7000 class-d amp and all i can say is wow.
|
|
Review by
Phillip from Lake Charles, LA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This was my first sub woofer I have ever got for my truck and I was very pleased with its performance. I paired it with a kenwood 350watt amp. The sub was way underpowered. It was only getting 150rms. The sub woofer had a fairly good sized magnet considering its only a P1. However it is time to upgrade so i just ordered a Rockford Fosgate T0 2 Ohm 12" sub for Christmas. This product is recommended for beginner system.
|
|
Review by
Jacob from Oahu, HI
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I owned 2 of these awhile back and man did these things surprise me! Wayyy better than the old punch line. And its a great price to! Great entry level sub.
|
For more information on wiring subwoofers, visit our Subwoofer Wiring Guide:
Subwoofer Wiring Guide
Customer Service
