Expert Service 1-661-257-9993 [Hours]

Kicker 05CVR102

10" CompVR CVR102 Dual 2 ohms

Discontinued
|

This item has been discontinued and
is no longer available

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

07cvr102 thumbnail

Kicker CVR102 (07CVR102)

OUR PRICE: $79.99

View item

Item Added to Cart

Kicker 05CVR102

10" CompVR CVR102 Dual 2 ohms

$99.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$10.99
Add Warranty
3 years of protection

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

$39.99

Add
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$53.99

Add
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$7.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Kicker 05CVR102.

Get FAST answers from customers ASK a Question See questions answers

  • 10" Dual 2 Ohms CompVR Series Subwoofer
  • Power Handling:
    • Peak: 600 watts
    • RMS: 300 watts
  • Impedance: Dual 2 ohms
  • Inverted Structural Dome Polymineral Injection Molded Cone: Remains rigid, and lowers distortion
  • Rear Cone Brace: Offers unmatched strength and resistance to deformation
  • Ribbed Santoprene Surround for Linear Cone Motion
  • Silver-Coated Stamped Steel Basket
  • Stitched Surround: Ensures the cone and surround won't seperate, even under the highest loads
  • High-temp Polyimide Film Voice Coil Former
  • Dual Ultra-Length Voice Coils
  • Perimiter Venting
  • Sleeved High-Power Tinsel Lead Wires
  • Spring Loaded Nickel-Plated Terminals
  • Authorized Internet Dealer

Grilles Not Included

Product History:

Kicker 43CWR102 thumbnail
(newest, current model)
Kicker 40CWR102 thumbnail
(previous model, replaced by Kicker CompR CWR102 (43CWR102))
Kicker 10CVR102 thumbnail
(previous model, replaced by Kicker CompR CWR102 (40CWR102) (Ships with Red Stitching))
Kicker 07CVR102 thumbnail
(previous model, replaced by Kicker CompVR CVR102 (10CVR102))
Kicker 05CVR102 thumbnail
(previous model, replaced by Kicker CVR102 (07CVR102))
Kicker 03CVR102 thumbnail
(previous model, replaced by Kicker 05CVR102)

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
600 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
300 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
25 - 500 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85.5 dB
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Inverted Structural Dome Polymineral Injection Molded
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
Optional (Accessory required and sold separately)
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5-7/16"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-1/4"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
86%
4 Star
14%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.6
Value
4.9
Features
4.6
Design
4.6
Usability
5.0
jay

Jensen Beach, FL

Overall
Durability
Value
Features
Design
Usability

March 16, 2006

Well my friend has 2 of these subs...and boy do they bump. I mean your not going to win no competitons with them but they are overall good subs if your looking for something to give you strong bass. i would recommend these to any one.

8 of 9 found this helpful

Was this review helpful to you?

Wiliam

Hampton, VA

Overall
Durability
Value
Features
Design
Usability
Great for price!!!

October 20, 2008

I had 2 of these in my mustang, I had to turn my bass gain down to zero,really good bass at low volumes decent bass up high, these are not the best out there but for a budget you cant go wrong.

6 of 7 found this helpful

Was this review helpful to you?

Kyle

greeley, CO

Overall
Durability
Value
Features
Design
Usability
Great

July 31, 2007

It is a great sub for the price. You cant find a better deal for how much you will pay. I love it. I will never go back to anything else after having a kicker!!!!!

6 of 7 found this helpful

Was this review helpful to you?

Michael

Glendale, AZ

Overall
Durability
Value
Features
Design
Usability
cvr!!!

July 13, 2007

i bought 2 of these and they pound!kicker all the way!great buy at sonic electronix!

6 of 7 found this helpful

Was this review helpful to you?

devin

Catawissa, PA

Overall
Durability
Value
Features
Design
Usability
good subs

November 14, 2005

these subs are good quality and wont empty ur pocket. my sister just put 2 of these in a sony sub box and they hit nice and hard and they look to be well built and durable. no disturbance when she has them hitting hard, and she has had them up pretty loud so for the price thee are a good way to go.

6 of 7 found this helpful

Was this review helpful to you?

chad

East Los Angeles

Overall
Durability
Value
Features
Design
Usability
Best Kicker subs i had!

November 27, 2009

I currently have one 10'' Kicker CompVR in a sealed box along with a older model Rockford Punch 55.2 bridged and this 10 is all i need for my everyday listening. I've had the 12's cvrs and those were way to much for me. Best subs 5 stars!

5 of 6 found this helpful

Was this review helpful to you?

william

roswell, NM

Overall
Durability
Value
Features
Design
Usability
best subs ive owned yet

July 9, 2008

man i just got these put in my ride and they shake the windows three houses away ive got a 400.1 kicker amp with a 1.75 cu ft per sub ported box and i love the message it gives me every time i turn it on

5 of 6 found this helpful

Was this review helpful to you?

Billy

Phoenix , AZ

Overall
Durability
Value
Features
Design
Usability
Nice subs

April 28, 2006

They subs are really nice. I have 2 in a lifted truck. If you don't have a lot of room to put subs these are the subs you should go with. Dont let the 300 rms fool you they are one of the loudest and best sounding 10's on the market.(for the price).

4 of 5 found this helpful

Was this review helpful to you?

Elias

Valencia, CA

Overall
Durability
Value
Features
Design
Usability
good subs

January 17, 2006

these subs really hit and are great for people with not alot of mounting depth you no longer have to sacrifice sound for lack of space

4 of 5 found this helpful

Was this review helpful to you?

Kurt

Macon, GA

Overall
Durability
Value
Features
Design
Usability
Amazingly good for a cheap price...

April 25, 2005

This is a very nice setup if your looking for decent bass without emptying your pocket.

4 of 5 found this helpful

Was this review helpful to you?

Marcus

Union, MS

Overall
Durability
Value
Features
Design
Usability
Great For Less!

November 18, 2008

I used to own two of these in a sealed box and they were awesome. They are a great way to have good Kicker sound for less.

4 of 6 found this helpful

Was this review helpful to you?

Nicholas

Plantation, FL

Overall
Durability
Value
Features
Design
Usability
very satisfied

February 22, 2008

I just finished installing one of these subwoofers into my vw rabbit and am very satisfied. very clean sound and can get very loud when i want it to. I think this sub sounds and performs better than my friends jl w3. i recommend a sealed enclosure for this speaker.

4 of 6 found this helpful

Was this review helpful to you?

albert

filer, ID

Overall
Durability
Value
Features
Design
Usability
loud!!!!

December 5, 2007

i bought four of these and i have them in a bed box, powered by a rockford t1000, everyone that rides with me have to plug their ears its so loud. i love it. and no one can believe i only spent 240 bucks on the subs, this deal is amazing. i love kicker

4 of 6 found this helpful

Was this review helpful to you?

Shauna

Lake City, AR

Overall
Durability
Value
Features
Design
Usability
awesome

September 8, 2006

i got 2 of these in the trunk of my mustang on a kicker zx300.1 running 2ohms and it bumps like crazy i didnt purchase mine here i bought them at my local circuit city they are the same price and they are worth bump deep for 10s good sq also you need to get the subs now

4 of 6 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

20 Ft. of Kicker 12 Gauge Speaker Wire

Get true gauge Kicker speaker wire to match your Kicker subwoofer!

Your Price $39.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $53.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $94.95

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $74.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $7.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $8.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Kicker GR100

10" Speaker Grille for Kicker Subwoofers

Your Price $19.95

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $15.89

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $19.95

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $3.44

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

1 Kicker 05CVR102 Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

2 Kicker 05CVR102 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 Kicker 05CVR102 Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

4 Kicker 05CVR102 Subwoofers

2 Channel Amp

4 Channel Amp

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

05CVR102

UPC

713034019527

Weight

13.00lbs

Internal SKU

05cvr102

Internal Product ID

3408

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kicker 05CVR102