True Power You Can Feel
The T1D415 Power Series 15" Subwoofer by Rockford Fosgate has a peak power rating of 2000 watts and a RMS rating of 1000 watts. This sub will produce some ground shaking bass and is constructed with a kevlar fiber reinforced semi pressed paper cone and a VAST santoprene rubber surround. This woofer is also equipped with Inductive Damping Heat Sink, this helps radiate heat to reduce the voice coil temperature and keeps the sub operating at a safe operating temperature when pumping out high amounts of SPL. Add some bumps in your trunk and enhance your cars stereo system with this Power Series Subwoofer.
SWIFT: Selectable Woofer Impedance Fused Termination
Making installation faster and easier, Rockford Fosgate developed SWIFT terminals. This system allows the nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. Removing and inverting the center plug, a Series or Parallel wiring configuration is accomplished. The removable jumper also provides fused protection in severe overload conditions.
IDHS: Inductive Damping Heat Sink
By securing the Inductive Dampening Heat Sink (IDHS) to the top of the magnet structure, Rockford Fosgate is able to improve the efficiency of their drivers. This is accomplished by reducing the amount of distortion and back Electro-Magnetic Force (EMF). The IDHS also radiates heat to reduce the temperature in the voice coil.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Product Features
- 15" Dual 4 Ohm Power Series Subwoofer
- Power Handling:
- Peak: 2000 watts
- RMS: 1000 watts
- Impedance: Dual 4 Ohm
- Kevlar fiber reinforced semi pressed paper cone for stability and durability
- High durability VAST Santoprene rubber surround for increased excursion and 25% more cone area
- Anodized aluminum voice coil former provide enhanced heat dissipation that keeps the subwoofer at a safe operating temperature
- Hard anodized aluminum dust cap
- Tear and fatigue resistant poly cotton spider equipped with stitched balanced tinsel leads that improve reliability and performance
- Optimized motor magnetics with extended vented pole piece and bumped backplate
- IDHS (Inductive Damping Heat Sink) helps radiate heat to reduce the voice coil temperature
- SWIFT terminals provide built-in fusing for protection of from voltage transients and allows nominal impedance of voice coils to easily be wired in a series or parallel configuration
- Rigid die-cast aluminum basket for strong construction
- Metal mesh grille included for added protection
- Double stacked Ferrite magnet structure
- Proprietary spider cooling vents
- Multi-point high temp/high strength neck joint bonding technique for added durability
- Removable and reversible screw concealing ring
- 3" High-temp voice coil with spun-laced Nomex re-inforcement collar
- Xmax: 16.4mm
- Mounting Diameter: 13-7/8"
- Mounting Depth: 8-3/8"
- SPL: 88 dB
- 1-year Manufacturer's warranty
Product History: |  |
| (newest, current model) | |  |
| (previous model, replaced by Rockford Fosgate T1D415) |
|
For more information on wiring subwoofers, visit our Subwoofer Wiring Guide:
Subwoofer Wiring Guide
Customer Service
